Author Topic: rear height problem with shock sustitution (Read 900 times)

Rafilla · « **on:** October 08, 2016 - 12:47:59 PM »

Hello to all

my car have installed and old monroe air shock (yellow) on rear with the air valve

Today I change it for a kayaba KG5512 but the car is very very low on rear

what can I do?? can you help me??

thanks and best regards

brads70 · « **Reply #1 on:** October 08, 2016 - 01:13:12 PM »

I'm guessing your springs are worn out and the airshock was holding them up.

Rafilla · « **Reply #2 on:** October 08, 2016 - 01:19:21 PM »

my rear springs have only 4 rows (I dont know how many that I need to have)

dfrazz · « **Reply #3 on:** October 08, 2016 - 01:39:14 PM »

Order a new set of spring from www.espo.com

Rafilla · « **Reply #4 on:** October 08, 2016 - 02:02:00 PM »

Thank you!!!

Rafilla · « **Reply #5 on:** October 08, 2016 - 02:07:01 PM »

Can you tell me a good height measure on rear please??

lulurocks · « **Reply #6 on:** October 08, 2016 - 02:18:25 PM »

Im putting in espo +1 as we speak

Here is a good thread on espos

http://www.cuda-challenger.com/cc/index.php?topic=109881.0

Rafilla · « **Reply #7 on:** October 08, 2016 - 06:25:29 PM »

Thank you!!!

Cool thread!!

Author Topic: rear height problem with shock sustitution (Read 900 times)

Rafilla

rear height problem with shock sustitution

brads70

Re: rear height problem with shock sustitution

Rafilla

Re: rear height problem with shock sustitution

dfrazz

Re: rear height problem with shock sustitution

Rafilla

Re: rear height problem with shock sustitution

Rafilla

Re: rear height problem with shock sustitution

lulurocks

Re: rear height problem with shock sustitution

Rafilla

Re: rear height problem with shock sustitution