Valve cover questions

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Valve cover questions  (Read 955 times)

    Offline lemon71fish

    • Jr. Member
    • **
    • Posts: 131
    Valve cover questions
    « on: June 26, 2005 - 07:44:14 PM »
    We have the mopar performance black ribbed valve covers and air cleaner... There is two oil fill cap and holes? how and where do you punch holes for the pcv valve and breather cap??  If i remember corrrctly Rev and Red have these covers? can anyone post pictures of them and help decide where to put the holes and all? Thanks again.

    Brett
    Logged


    Offline 4Cruizn

    • Administrator
    • C-C.com Expert
    • *****
    • Posts: 18521
    • HEMI FISH
    Re: Valve cover questions
    « Reply #1 on: June 26, 2005 - 10:11:25 PM »
    I had mine machined out by a friend! 
    Logged

    Offline Killer_Mopar

    • Sr. Member
    • ****
    • Posts: 1886
    Re: Valve cover questions
    « Reply #2 on: June 26, 2005 - 10:24:05 PM »
    I used a hole-saw to semi-drill it from the top. I then used a socket as a hole punch and put the valve and grommet in. THe grommet took a little persuasion, I used a little oil to slip it in.....
    Logged
    70 Challenger R/T SE - The never-ending project........

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Valve cover questions
    « Reply #3 on: June 26, 2005 - 11:32:24 PM »
    I used, i belive a 1" hole saw for the PCV and a 1 1/4" for the K&N Breather. I used the mopar reccomended grommet for the PCV because i didnt want to mess around with finding out what fits for $2 cheaper or whatever...The breather just pushed in/no grommet.




    I too have the air cleaner goin on as soon s the 4bbl does  :dogpile:


    -Goody
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link

    Offline lemon71fish

    • Jr. Member
    • **
    • Posts: 131
    Re: Valve cover questions
    « Reply #4 on: June 27, 2005 - 09:47:18 AM »
    We arent too worried as to the actual punching out of the holes since dad is a machinist with his own business... but the question must have been worded wrong. our covers are exactly the same, we didnt want to have two fill caps and we were told that the pcv valce did the same thing as a breather cap (release the vaccum/pressure) except the pcv valve utilized the pressure by sending it the the brake system. the question is...  is a pcv valve to hook our vaccum line to and an oil fill hole all we need????thanks

    brett
    Logged

    Offline GoodysGotaCuda

    • Sr. Resident
    • ******
    • Posts: 5392
    Re: Valve cover questions
    « Reply #5 on: June 27, 2005 - 11:15:33 AM »
    Quote from: lemon71fish on June 27, 2005 - 09:47:18 AM
      is a pcv valve to hook our vaccum line to and an oil fill hole all we need????thanks

    brett


    That kinda made sense, but whats so hard about running a pcv valve and a line to the carb?  :dontknow:
    Logged
    Build Page: Goody's 'Cuda Build Page
    1976 Dodge Warlock
    1972 Barracuda - 5.7 Hemi + T56 Magnum

    Wheel & Tire Specs:Link
    Pages: [1]
    « previous next »