Author Topic: Door panel Vapor barriers (Read 2199 times)

Blasterb · « **on:** January 31, 2017 - 02:40:44 AM »

Does anybody have any idea where I could find a set of challenger door plastic vapor barriers? Any help would be greatly appreciated.

Bullitt- · « **Reply #1 on:** January 31, 2017 - 08:32:28 AM »

http://www.performancecargraphics.com/Door_Stuff/Moisture_Barrier.htm

I still have my originals & plan on making my own, thinking shower curtain liner would work well.

burdar · « **Reply #2 on:** January 31, 2017 - 09:44:03 AM »

Just go to the hardware store and buy a roll of 3 or 6 mil plastic sheeting. Then cut it to fit. Use the rest for paint drop cloth.

Fern · « **Reply #3 on:** January 31, 2017 - 05:24:36 PM »

I used a heavy mil plastic and secured it with 2 way tape.

EB3-GranCoupe · « **Reply #4 on:** January 31, 2017 - 06:38:45 PM »

I'd make sure its UV resistant. Other wise, in a couple of years, you just have a mess of plastic crumbles.

https://www.menards.com/main/paint/drop-cloths-plastic-sheeting/poly-film/c-8188.htm

dodj · « **Reply #5 on:** January 31, 2017 - 09:24:29 PM »

I'd make sure its UV resistant. Other wise, in a couple of years, you just have a mess of plastic crumbles.

If you put the interior door panel on, it will never see UV....

Blasterb · « **Reply #6 on:** February 01, 2017 - 05:02:13 PM »

Thanks a bunch for the info.I'll try the 6 mil. What do you use for the putty strings?

Bullitt- · « **Reply #7 on:** February 01, 2017 - 11:36:58 PM »

Blasterb · « **Reply #8 on:** February 02, 2017 - 05:08:31 AM »

Thanks again for the info!

60K T/A · « **Reply #9 on:** February 05, 2017 - 09:04:32 AM »

I used sound insulation ie: Dynamat, Hushmat etc..

DAYLEY/CHALLENGER · « **Reply #10 on:** February 05, 2017 - 09:28:41 AM »

Heavy duty plastic and some adhesive caulking.........

PlumCrazyRTSE · « **Reply #11 on:** February 05, 2017 - 10:16:24 AM »