Author Topic: rally gauge wiring  (Read 1319 times)

Offline culp71

  • Full Member
  • ***
  • Posts: 683
rally gauge wiring
« on: April 11, 2017 - 02:39:00 PM »
so since I've been informed that this is not needed any more... what gets connected in its place or to the opposing terminal?




Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: rally gauge wiring
« Reply #1 on: April 11, 2017 - 04:02:58 PM »
If you have the solid state 5v limiter then nothing needs to be connected in the condensor's place. Some companies sell a solid state version with only 2 terminals, one for the 12v input and one for the regulated 5v output. I have one of those on my spare rallye cluster.
John

1970 Barracuda convertible
2014 Toyota Avalon

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: rally gauge wiring
« Reply #2 on: April 11, 2017 - 10:46:52 PM »
That capacitor assisted a bit in filtering the o/p of the regulator. If you have an original regulator, the capacitor helps. However, all original capacitors are, by now, garbage. Capacitors have a shelf life and it is a lot less than 40+ years.
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline 73440

  • Sr. Member
  • ****
  • Posts: 1826
Re: rally gauge wiring
« Reply #3 on: April 12, 2017 - 06:30:03 AM »
67 440
72 413 / 727
73 Barracuda w/ 68 440
65 Plymouth Fury III , I sold ,was my Nana's car till 92 yo.
51 Ford F1 239 Flathead, flipped , new cab , stolen
59 BelAir 283 4 door original patina
01 Chevy van 420, 520 miles
06 Crown Vic Police Interceptor
75 HD Ironhead converted to RH shift
73 HD Ironhead
82 HD Ironhead
74 Norton 850
80 HD Shovelhead
80 Husqvarna WR 390

Offline CudaJon

  • Jr. Member
  • **
  • Posts: 120
Re: rally gauge wiring
« Reply #4 on: April 12, 2017 - 07:41:56 AM »
I purchased one last week and installed it and works exactly like the original one but burns a lot less power. You can also put the Cap back on for appearances if you would like,  it has the extra tab but it does not connect to the internal circuit. 

Offline jason340

  • Jr. Member
  • **
  • Posts: 206
Re: rally gauge wiring
« Reply #5 on: April 12, 2017 - 08:59:52 AM »
I don't mean to confuse the issue but I bought and RTE from Dave at Performance Graphics and he said DO  NOT USE THE CAPACITOR. He was very emphatic about it. My car had the original voltage limiter and cap. They still worked but I replaced them just for peace of mind.

Offline Mpdlawdog

  • Full Member
  • ***
  • Posts: 657
Re: rally gauge wiring
« Reply #6 on: April 12, 2017 - 01:17:15 PM »
I ordered mine last night...it was $60 shipped...not much money for piece of mine I thing....I have my dash out and rewiring the entire thing.......this was on the list..plus I am doing the clock upgrade and a new tach....really dont want to burn them up!!

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: rally gauge wiring
« Reply #7 on: April 14, 2017 - 03:27:44 PM »
so since I've been informed that this is not needed any more... what gets connected in its place or to the opposing terminal?

LOL. I guess we never answered your question. Nothing gets connected in its place. Just leave it blank.
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.

Offline JayBee

  • Resident
  • *****
  • Posts: 2477
Re: rally gauge wiring
« Reply #8 on: April 14, 2017 - 05:18:41 PM »
LOL. I guess we never answered your question. Nothing gets connected in its place. Just leave it blank.

Sure was...April 11th

If you have the solid state 5v limiter then nothing needs to be connected in the condensor's place.
John

1970 Barracuda convertible
2014 Toyota Avalon

Offline dodj

  • Sr. Resident
  • ******
  • Posts: 6197
Re: rally gauge wiring
« Reply #9 on: April 14, 2017 - 09:04:14 PM »
Whoops  :banghead:
Scott
1973 Challenger  440 4 spd 
2007.5 3500 6.7 Cummins Diesel, Anarchy tuned.
Good friends don't let friends do stupid things. ........alone.