Author Topic: Heater system without air  (Read 1268 times)

Offline msbaugh

  • Sr. Member
  • ****
  • Posts: 1148
Heater system without air
« on: June 04, 2017 - 09:10:23 PM »
At this point I am missing everything for my car! I need a full heater box for a car without A/C, heater core, switch, cables, heater motor, everything! I see a lot of people sell the small parts but I can't find the whole inner box. Anybody have one or know if they're repopped?

I could use a diagram if someone has one.  I don't know where to start with the parts list. I do have both vent boxes and the plastic defroster parts under the dash.




Offline Beekeeper

  • Full Member
  • ***
  • Posts: 964
Re: Heater system without air
« Reply #1 on: June 04, 2017 - 09:26:34 PM »
They get kinda pricey. I have sold restored boxes for $500. There was a couple guys on eBay doing the same. You're really better off doing that rather than cobbling together a list of pieces. Some of the parts like inner flapper doors are nearly impossible to find.

Offline msbaugh

  • Sr. Member
  • ****
  • Posts: 1148
Re: Heater system without air
« Reply #2 on: June 04, 2017 - 09:53:15 PM »
I was afraid of that. Nothing online I can find right now... I guess I'll just keep looking

Offline msbaugh

  • Sr. Member
  • ****
  • Posts: 1148
Re: Heater system without air
« Reply #3 on: June 04, 2017 - 09:55:45 PM »
Are all years challenger and cuda non air heater boxes the same?

Offline GoodysGotaCuda

  • Sr. Resident
  • ******
  • Posts: 5392
Re: Heater system without air
« Reply #4 on: June 04, 2017 - 10:20:23 PM »
Depending on your timeline, I have a 1972 non-A/C cuda heater box and all the controls pulled out of my car. I went to Vintage Air.

I would need to get together all of the bits and pieces, but I should have it all to sell. I'd need a few weeks before I could get to that.
Build Page: Goody's 'Cuda Build Page
1976 Dodge Warlock
1972 Barracuda - 5.7 Hemi + T56 Magnum

Wheel & Tire Specs:Link

Offline Beekeeper

  • Full Member
  • ***
  • Posts: 964
Re: Heater system without air
« Reply #5 on: June 04, 2017 - 10:20:57 PM »
Are all years challenger and cuda non air heater boxes the same?

As far as I know, they are all the same. I've redone many over the years and the only difference I've ever found is the early versions of the fan cage are aluminum and they switched to plastic.

Offline msbaugh

  • Sr. Member
  • ****
  • Posts: 1148
Re: Heater system without air
« Reply #6 on: June 04, 2017 - 10:50:11 PM »
Depending on your timeline, I have a 1972 non-A/C cuda heater box and all the controls pulled out of my car. I went to Vintage Air.

I would need to get together all of the bits and pieces, but I should have it all to sell. I'd need a few weeks before I could get to that.


Sending you a PM