72-74 Cuda grille installation guidance

[70chall440]

I need a little help in understanding where all of the "bits" of the hardware kit go. Anyone that can help, I appreciate it.

[73440]

http://www.ebay.com/itm/371873869006?vectorid=229466&item=371873869006&rmvSB=true

Looks like this kit breaks it into three areas, that may help narrow it done. The seller may have and be able to send a location diagram.
I looked thru Mitchell parts manual , but no fasteners are listed.

[70chall440]

Ive looked through all of the reference manuals, books I have and nothing really shows location and application in detail. I can probably figure it out but Id rather know going in. It would appear that the plastic blocks are used around the headlight trim rings, however I am not sure exactly where the white round one goes.

[crash340]

7 are the screws that hold the headlight trim rings on, they screw into some of the metal clips number 1,
4 screw into 6 along the top of the grill into the header panel

White round blocks I'm working on for you

[70chall440]

7 are the screws that hold the headlight trim rings on, they screw into some of the metal clips number 1,
4 screw into 6 along the top of the grill into the header panel

White round blocks I'm working on for you

Thanks Greg. I believe that screws #3 go into the white round things and it seems to me they go in the outer lower corners but I am not positive. Screws #2 go into metal clips some place which I suspect I will figure out once I really look at it.

[Aracer]

I have a 74 cuda those plastic things are Mollys for the front light door, the holes that they go in are big, screws are the longest.
   The grill has flat expanding barb clips that hold the chrome trim.
The big spring nuts hold it to the header, it (grill) is a hanging facade, without bottom support.
     

[70chall440]

I have a 74 cuda those plastic things are Mollys for the front light door, the holes that they go in are big, screws are the longest.
   The grill has flat expanding barb clips that hold the chrome trim.
The big spring nuts hold it to the header, it (grill) is a hanging facade, without bottom support.
   

Thanks, I think I understand what you are saying, but I need to look at it closer.

[70chall440]

I have a 74 cuda those plastic things are Mollys for the front light door, the holes that they go in are big, screws are the longest.
   The grill has flat expanding barb clips that hold the chrome trim.
The big spring nuts hold it to the header, it (grill) is a hanging facade, without bottom support.
   

You don't happen to have a picture of where the "Mollys" go do you?

[Aracer]

I would have to take it apart.  They go in the fender structure @ the top, out side. The same as my 68.  The mollys are an extension so screw reaches the light backing structure.  They even have plastic mollys on my 1963pick up
 headlight covers. Old tech.

[70chall440]

Thanks. I looked and couldn't find where they went and every screw went into a J clip and I cant find any unused holes. Regardless, it is in and I am good. thanks again, perhaps one day I will see it and realize I missed something.

[73440]

 I recently ordered a couple of cans of light Argent paint should arrive next week so will be taking my 73 Grill off and can look to see how that's all attached

[70chall440]

I appreciate it, there appears to be a fair amount of confusion as to these "mollys" and where/how they go and are mounted.