Manual Master Cylinder with 1" bore and Bolt on Cap

[7Dcuda]

I've searched the forum and didn't find an answer to this question. 

Does anyone know where I can get the original, stock type master cylinder for manual brakes that has the 1" bore and that has the bolt on cap?

[70chall440]

Is this for a specific application (meaning a replacement) or something else?

[DAYLEY/CHALLENGER]

Look on Classic Industries.


https://www.classicindustries.com/product/all-years/plymouth/all-models/parts/mc36221.html

[7Dcuda]

Is this for a specific application (meaning a replacement) or something else?

Not sure I know what that has to do with my question.....but its for a 70 Barracuda that currently has manual brakes, disc on front, shoes in the rear,   The car originally had manual drum brakes front and rear but someone put a front disc conversion kit on it but I'm assuming the master cylinder wasn't changed.  Either way, the brakes work fine, the master cylinder is just leaking a little so I want to replace it with the same type master cylinder since I know this one works fine. 

     

[70chall440]

Not sure I know what that has to do with my question.....but its for a 70 Barracuda that currently has manual brakes, disc on front, shoes in the rear,   The car originally had manual drum brakes front and rear but someone put a front disc conversion kit on it but I'm assuming the master cylinder wasn't changed.  Either way, the brakes work fine, the master cylinder is just leaking a little so I want to replace it with the same type master cylinder since I know this one works fine. 

   

I asked because many most vendors list master cylinders by their application and not their bore sizes.