Side window parts ID

[V12T]

I have installed a manual window in my 1970 Challenger which seems to work but have a few parts left over in the box - see pic.
I'm sure the two (per door) guides must go somewhere, the other two pieces may be something else completely. Can you please ID them for me.

[70chall440]

Top to bottom

Hood alignment bumper (one goes on each side of the hood screwed to the fender on the lip that the bolts are on)

Remote mirror clip (goes over the mirror barrel which is the part that goes through the door panel, this clip keeps the barrel from coming through the door panel)

window adjustments (these bolt to the body and ride against the glass as it goes up and down)

[V12T]

Thanks - great knowledge.  I thought that they were glass guides of some sort but cannot figure where they attach to the door. Can you give me a location please.

[70chall440]

Yes, they go up to the top of the window channel. BTW they are called window guides.

Here are 2 pictures. Look for slotted holes up near top of the inside frame. The doors have 2 guides, one in the front and one towards the rear.

[V12T]

Found the slots and it was obvious how they fit and work. Easy when you know how! Thanks again for your expertise.

[70chall440]

Welcome, glad you got it sorted out. None of us were born with any of this knowledge, we all had to either figure it out or have someone tell/teach us. Its all good.