Author Topic: AAR Duck Tail Spoiler?  (Read 1306 times)

Offline redo1973

  • Full Member
  • ***
  • Posts: 549
AAR Duck Tail Spoiler?
« on: February 18, 2020 - 09:57:35 PM »
I need to replace my rear spoiler and have been researching e-bay and other sites.  I've noted two particular products both claim to be correct ABS specifications but have dramatically different pricing.  I've reviewed products by Tamraz and First Place Auto Product with New England Mustang but these are pricey. The alternate less costly option is Stripe Classics but I can't determine why such a price difference.  Does anyone have suggestions on a reliable supplier of an ABS formed duck tail spoiler? 




Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: AAR Duck Tail Spoiler?
« Reply #1 on: February 18, 2020 - 11:18:58 PM »
First Place Auto is known for their spoilers but I cannot recommend any of them over any other. What you want to look for is the bottom, many of the cheaper ones either have no bottom or they do not have the correct contour/cut outs for the mounts. I took a quick look around the internet and they vary wildly in cost.

Have you looked at this place? They know Cudas

http://www.dalescudashop.com/aarrearspoiler.html
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

Offline 'Cuda Hunter

  • Sr. Resident
  • ******
  • Posts: 9102
  • Tastes Like Chicken
Re: AAR Duck Tail Spoiler?
« Reply #2 on: February 19, 2020 - 01:27:22 AM »
Dale's is a very good bet. 
It's always worth asking Dave at Roseville.   
"All riches begin as a state of mind and you have complete control of your mind"  -- B. Lee

Offline redo1973

  • Full Member
  • ***
  • Posts: 549
Re: AAR Duck Tail Spoiler?
« Reply #3 on: February 19, 2020 - 07:19:13 PM »
Thanks guys.  Roseville's product had similar comment and specifications but I could not determine the manufacturer so I'll see where he is getting as he hasn't done me wrong so far on this project :ylsuper:.  I'll recheck Dale's. I've forgotten what mine looks like but I'm pretty sure it is ABS with the cutouts and what appear to be hardware consistent with the others.  My concerns will be my pre-drilled holes in a base model trunk lid. I'll let you know what I learn. I'm not in a big rush but I have some spider cracking on it from some light bodywork and it just simply bugs me when at shows.

Offline 70chall440

  • Sr. Resident
  • ******
  • Posts: 6484
Re: AAR Duck Tail Spoiler?
« Reply #4 on: February 19, 2020 - 11:14:11 PM »
Good plan.
Current Mopar
70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
Past Mopars
9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)