News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: can't adjust slapstick to lock in Park  (Read 2911 times)

    Offline droptail

    • Jr. Member
    • **
    • Posts: 36
    • KETCH JC
      • droptail
    can't adjust slapstick to lock in Park
    « on: July 20, 2020 - 04:22:08 PM »
    its hit & miss whether or not the parking paw engages in my '70 cuda, also it won't ratchet into Drive without pushing the button & pushing it almost into Neutral.
    This consistent with needing to adjust the linkage to pull backwards more - but I tried & it wouldn't slide anymore rearward - any ideas?

    Thanks
    « Last Edit: July 20, 2020 - 04:30:42 PM by droptail »
    Logged
    bought off the showroom floor: '70 Cuda convt - 383 bored/ported, Hemi cam, Rhodes, rollers, Mellings,  MSD, 780 Holley, LT dual 3", lowered, snubber, police chuck, discs, springs, sway bars, B&M, posi, shaker, split 15" rallyes w/295's, leather...


    Offline 70chall440

    • Sr. Resident
    • ******
    • Posts: 6484
    Re: can't adjust slapstick to lock in Park
    « Reply #1 on: July 31, 2020 - 12:43:34 AM »
    It sounds like the lever on the trans is loose and/or slopped out.
    Logged
    Current Mopar
    70 Challenger RT 440-6 EFI, 73 Cuda 416-6 EFI
    05 Hemi Durango, 01 Ram 4x4, 14 Ram 2500 4X4, 10 PCP Challenger 6 spd RT, 01 Viper GTS ACR, 52 B3B w/330 Desoto Hemi, 70 Hemi RR (under const)
    Past Mopars
    9 x Challengers. AAR Cuda, 4 RR, 2 GTX, 4 Chargers, etc... (too many to list)

    Offline droptail

    • Jr. Member
    • **
    • Posts: 36
    • KETCH JC
      • droptail
    Re: can't adjust slapstick to lock in Park
    « Reply #2 on: August 02, 2020 - 11:48:32 AM »
    I found this adjustment technique - and worked great for me:

    Loosen the small bolt that clamps the shift rod (on d/s) to trans lever.
    Put the slap stick in first
    Push the trans rod fwd manually (while under the car) into 1st.then tighten the bolt on the "box"

    thanks
    Logged
    bought off the showroom floor: '70 Cuda convt - 383 bored/ported, Hemi cam, Rhodes, rollers, Mellings,  MSD, 780 Holley, LT dual 3", lowered, snubber, police chuck, discs, springs, sway bars, B&M, posi, shaker, split 15" rallyes w/295's, leather...

    Offline rallyechall

    • Jr. Member
    • **
    • Posts: 390
    Re: can't adjust slapstick to lock in Park
    « Reply #3 on: November 17, 2020 - 09:44:12 PM »
    God, it has been a hundred years since I have last posted. Make sure the spring is still attached to the shift mechanism. Most often times it comes off and lays under the console.
    Logged

    Offline Jannik

    • Jr. Member
    • **
    • Posts: 7
    Re: can't adjust slapstick to lock in Park
    « Reply #4 on: February 15, 2021 - 03:30:59 AM »
    I'm kind of sure that the lever on the trans is loose, try to check it out
    Logged
    Pages: [1]
    « previous next »