My '71 resto (updated 10-28-13)

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 [2] 3 4 ... 7

    Author Topic: My '71 resto (updated 10-28-13)  (Read 25956 times)

    Offline A110235

    • Jr. Member
    • **
    • Posts: 414
    • '71 Challenger JH23G1B
    Re: My '71 resto
    « Reply #15 on: October 15, 2005 - 11:20:45 AM »
    I didn’t make as much progress as I wanted to, but I got the rear floor patched in.  I also replaced a piece of metal in the inner rocker where the seat frame attaches.  I put on the new leaf springs, shackles and forward spring mounts and got it back on all fours.  I wanted it mobile just in case my family decided to “Foose my ride” while I am gone.





    « Last Edit: December 01, 2006 - 04:58:08 PM by A110235 »
    Logged



    Nashville, TN         Member since October 09, 2004


    Offline AprilsPink72Cuda

    • Global Moderator
    • Resident
    • *****
    • Posts: 4783
    • 1972 'Cuda 340/Wappingers Falls, NY
      • Klondike's Website (Check it out!)
    Re: My '71 resto (10-15-05)
    « Reply #16 on: October 15, 2005 - 12:43:18 PM »
    Quote from: A110235 on October 15, 2005 - 11:20:45 AM
    I wanted it mobile just in case my family decided to “Foose my ride” while I am gone.



    That made me laugh sooooo hard!   

    Nice job so far with the metal work.  You are my hero!  I would give anything to learn how to what you have done.  Maybe someday.  Keep up the good work!
    Logged

    Offline Carlwalski

    • C-C.com Expert
    • ********
    • Posts: 20672
    Re: My '71 resto (10-15-05)
    « Reply #17 on: October 15, 2005 - 04:38:34 PM »


    April - I agree!! LOL But you should be careful you may have gotten "Pimp my Rided"!! Pink, fluffy interior and green 26" mags!! lol

    Looks good mate, hat off to you.....that is some serious work.
    I always love seeing these photos, great seeing these cars being treated properly and with care.
    Logged
    1970 Dodge Challenger R/T
    White, License Plate, 0A-5599
    540ci Aluminium Hemi, F.A.S.T EFI
    TF-727 Gear Vendor OD, Dana 60

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: My '71 resto (10-15-05)
    « Reply #18 on: October 15, 2005 - 06:09:18 PM »
    Simply put,....motivational photos. Great work!! I wish I could watch you in person as you are doing all this.
    Logged
    Mike, Fremont, CA.

    Offline RUSTY Cuda

    • Sr. Member
    • ****
    • Posts: 1948
    • One big step foward!
    Re: My '71 resto (10-15-05)
    « Reply #19 on: October 15, 2005 - 06:43:54 PM »
    WOW! Nice work, isn't it a great feeling when the rusted crap is gone & your weldin in the new metal! Rich.
    Logged

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: My '71 resto (10-15-05)
    « Reply #20 on: October 15, 2005 - 07:00:20 PM »
    Just found this place on how to get started.

    http://store.cyberweld.com/learningcenter.html
    Logged
    Mike, Fremont, CA.

    Offline Hemi Challenger

    • Sr. Member
    • ****
    • Posts: 1105
    • Nothing run better then a HEMI
    Re: My '71 resto (10-15-05)
    « Reply #21 on: October 16, 2005 - 05:54:24 AM »
    Nice work  Like everyone has said you got alot of work ahead of you but it going to be nice when you get done, keep up with the Pic, LOVE them, it make me want to go out and get a Mig welder and try that kind of work on thing that I got to weld
    Logged

    Offline Super Blue 72

    • Permanent Resident
    • *******
    • Posts: 12711
    • "Big 'n Little" Member since 8/9/05
      • Phil's Super Blue '72
    Re: My '71 resto
    « Reply #22 on: October 16, 2005 - 08:34:46 AM »
    Quote from: A110235 on October 15, 2005 - 11:20:45 AM
    I didn’t make as much progress as I wanted to, but I got the rear floor patched in. 

    Are you kidding?

    You're going to have your car done before I even get to mount my Go-Wing!

    Awesome job and great pics!  This task you're taking on is not for the faint hearted and you're doing a great job!
    Logged
    1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

    Pic #2 and 3 of my ARII 1/24 scale model car 

    Phil in New England-Massachusetts  Always thank God for what you have!

    http://www.cardomain.com/ride/456046/1972-dodge-challenger

    Offline moparnut

    • Resident
    • *****
    • Posts: 2410
    • Nutin like a nice Piece of Hickory"Clint Eastwood
      • My Photo's
    Re: My '71 resto (10-15-05)
    « Reply #23 on: October 16, 2005 - 09:46:25 AM »
    Quote from: A110235 on October 06, 2005 - 09:49:40 PM
    And so it begins...


    The first thing that I needed to address was the roof.  It looked pretty bad, but it was light surface rust and  the only soft spots were near the seam on the sail panel.  After a lot of grinding and some of Eastwoods rust neutralizer it looked decent.  I gave it a quick spray-can coat of primer to hold it for now. 


    Just a thought for you,Primer's are porous and will let moisture pass thru,Unless you use a primer/sealer/etcher all in one(Great stuff,look at my Sig for Pics on my project Gran Coupe)) like Valpar 2k primer sealer.I am sure a local Valspar dealer could put some in a rattle car for you or buy a gallon and spray it yourself.You will be much happier and safer to your metal,my 2 cents worth
    Logged
    70 Barracuda Gran Coupe,383-4bbl,# Match
    2012 Subaru Forester
    70 D100 Adventurer 383 pickup
    02 F250 S'cab Powerstroke 7.3 4x4 6 speed Manual
    06 Honda VTX1800S Spec 3

    Offline A110235

    • Jr. Member
    • **
    • Posts: 414
    • '71 Challenger JH23G1B
    Re: My '71 resto (4-4-06)
    « Reply #24 on: April 04, 2006 - 06:32:06 PM »
    Well, much to my neighbors dismay, I have started working on my car again.  But before I started anything I welded up a little cart for my welder.  It is so much easier to wheel everything around! 



    I have ordered both rear frame rail replacements and trunk panels from Sherman.  Today I was working on some metal to connect everything up with the frame piece that I fabricated a couple of months ago.  When I tackle the left side I’ll fabricate one solid piece down to the forward spring mount.   



    I got the tail lights off and put the back end up in the air again.  It’s at just about the right height to sit on the floor and comfortably work on stuff now.




    An this will come in handy for all the little things I’ll have to fabricate/replace along the way.  Thanks Santa Claus!


    Luckily I’m unemployed right now (yeesh!) so I’ll be able to put in some good solid days of work on it.  Stay tuned!

    Kyle

    P.S.  Thanks moparnut for the tip on the primer/sealer.  I’ve picked up a couple of cans.


    Logged



    Nashville, TN         Member since October 09, 2004

    Offline Plum6Pak

    • Resident
    • *****
    • Posts: 3572
    • Plum6Pak
    Re: My '71 resto (10-15-05)
    « Reply #25 on: April 04, 2006 - 07:28:28 PM »
    Kyle, you are teaching many of us something about metal work, but also where there's a will, there's a way. Plus determination and confidence! Please keep the pictures coming as you go, these are my favorite kind of threads.
    Thanks, P6P
     :thumbsup:
    Logged

    Offline hemi71

    • Resident
    • *****
    • Posts: 2426
    Re: My '71 resto (10-15-05)
    « Reply #26 on: April 04, 2006 - 07:50:02 PM »
    My hats off to you!  Great work you are doing here...this isn't a restoration or restification, it's a resurrection!

     :cheers:    :thumbsup:
    « Last Edit: April 05, 2006 - 10:44:11 AM by Rev-It-Up »
    Logged

    Offline 70RTdroptop

    • Full Member
    • ***
    • Posts: 608
    • 1970 Challenger R/T 440-SixPack
    Re: My '71 resto (10-15-05)
    « Reply #27 on: April 04, 2006 - 08:07:43 PM »
     :iagree: Just look forward to the day that all your effort will pay off. I'm sure all of us on this board are cheering you on. 
    Logged
    1970 Dodge Challenger R/T 440-6 convertible
    1966 Ford Mustang convertible  - numbers matching (wife's car )

    Offline Street_Challenged73

    • Sr. Resident
    • ******
    • Posts: 8826
    • '73 FC-7 Challenger..Member since October 20, 2002
      • My '73 Challenger Restoration Page
    Re: My '71 resto (4-4-06)
    « Reply #28 on: April 04, 2006 - 10:27:37 PM »
    Very nice progress, A110235!!!  That was a lot of rust to repair, but it's really looking great!!!! :grinyes: :cheers:
    Logged
    1973 Dodge Challenger......................The ongoing project. (00/----\00)
    1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
    1990 Toyota Celica GT Liftback...........The new daily & winter driver.
    All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                                 
                     
    Street_Challenged73 from Wisconsin

    Offline chevyconvert

    • HvacMan
    • Sr. Member
    • ****
    • Posts: 1693
    • Member since November 04, 2005
    Re: My '71 resto (4-4-06)
    « Reply #29 on: April 04, 2006 - 11:08:14 PM »
    I gotta admit when I see this kind of project it's humbling.
    Suddenly my "big" problems with my Challenger are more like anoyances.
    That said, for whatever reason; when you can't drive your car  :pullinghair:
    Anyways....Keep up the good work :thumbsup:
    Logged
    Eric
    '70 Hemi Orange RT/SE 440 Six Pack Pistol-Grip 4 speed
    Bay Area California
    Pages: 1 [2] 3 4 ... 7
    « previous next »