Another A-body guy, 408 4spd ^_^

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: Another A-body guy, 408 4spd ^_^  (Read 3212 times)

    Offline dst

    • Jr. Member
    • **
    • Posts: 26
    • Negated Identity Construct
    Another A-body guy, 408 4spd ^_^
    « on: November 06, 2005 - 07:28:27 PM »
    Yup, that’s right. Too young to afford an E-body but just old enough to afford to an A-body build (barely!). Anyways, I’m here to get more opinions on my build. I am a member of MoparChat but would like to get more views and opinions.

    I was referenced by dodgetkboy78, the guy with the aviator that well reflects his personality.

    Anyways here’s my info:

    Short block:
    Mopar Perf. 4.00 crank
    Eagle Rods
    Probe.030 over pistons
    JE piston rings
    Durabond bearings
    ***Internal balanced, no Mallory***
    Milodon Oil pan and windage tray
    McCloud SFI flywheel and generic internal balancer

    Rest:
    Edelbrock heads – maybe ARP stud system or just reg heat bolts depending on $$$.
    Felpro head gasket
    ARP bolts
    Timing chain - ??? RollMaster maybe?
    Rockers -???
    Lifters - ???
    Cam - ???
    Stock chain cover
    Stock water pump (until gain enough money to replace, recommendations?)
    Stock fuel pump (until gain enough money to replace, recommendations?)
    Performer RPM intake
    Edelbrock 600cfm carb (until gain enough money for other carb, recommendations?)

    Car:
    Old beat-up Duster
    Old worn 4spd
    Old worn 83/4 3.23 SG

    And here are some pictures of my block:
    http://www.moparchat.com/forums/showthread.php?t=93710
    Logged
    There are those who have fallen and those who are going to fall.


    Offline Plum6Pak

    • Resident
    • *****
    • Posts: 3572
    • Plum6Pak
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #1 on: November 06, 2005 - 08:01:08 PM »
    Welcome dst, that block looks pretty nice to me, hard to see how well it was done with pictures but from all appearance it looks good. Best of luck with your project.
    Logged

    Offline Killer_Mopar

    • Sr. Member
    • ****
    • Posts: 1886
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #2 on: November 06, 2005 - 08:36:32 PM »
    Welcome DST, I'm also memberover at MoparChat.  I've never seen you there........but then again I hardly go over there after finding this forum. Although moparchat is a great forum, this place has a much better sense of a community and I'm sure you will discover this after being here a little while. Anyhow, you shortblock looks amazing and I can't wait to see it in that "Old beat-up duster"
    Logged
    70 Challenger R/T SE - The never-ending project........

    Offline Rev-It-Up

    • Global Moderator
    • Permanent Resident
    • *****
    • Posts: 10601
    • Member Since 2/20/02
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #3 on: November 06, 2005 - 09:19:23 PM »
    Did someone mention an old beat-up duster???  Welcome to the board DST!!  Let's see that duster!
    Logged
    Rev-It-Up                                                             Yes, I'm a girl!
                             

    Offline Ghost

    • Resident
    • *****
    • Posts: 2912
    • I miss my Barracuda :(
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #4 on: November 06, 2005 - 09:43:42 PM »
    There's not a damn thing with A bodies!

    Welcome, and, of course, we will need pics.
    Logged

    Oldschool

    • Guest
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #5 on: November 06, 2005 - 09:47:55 PM »
    "A" bodies are cool.  They are getting harder to find than "E" bodies. And don't forget--The "A" bodies lineage gave us those "E" bodies. Both are great, it's a matter of choice and I like em all!!...........Oldschool
    Logged

    Offline Street_Challenged73

    • Sr. Resident
    • ******
    • Posts: 8826
    • '73 FC-7 Challenger..Member since October 20, 2002
      • My '73 Challenger Restoration Page
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #6 on: November 06, 2005 - 11:06:04 PM »
    Welcome to the site, DST.  That engine looks like it'll be a solid foundation for your build up.  Best of luck with it!
    Logged
    1973 Dodge Challenger......................The ongoing project. (00/----\00)
    1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
    1990 Toyota Celica GT Liftback...........The new daily & winter driver.
    All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                                 
                     
    Street_Challenged73 from Wisconsin

    dodgetkboy78

    • Guest
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #7 on: November 07, 2005 - 12:28:25 AM »
    Whats wrong with my avatar?

    Hey dst!
    Logged

    Offline torredcuda

    • Sr. Resident
    • ******
    • Posts: 6218
    • Epping NH joined 11/23/03
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #8 on: November 07, 2005 - 03:24:49 AM »
    Welcome!Your engine combo looks pretty stout but I would get at least a better mechanical fuel pump as you don`t want to starve your engine for fuel and risk burning a piston or something.Holley and Carter both make good mechanical units that are fairly cheap $$.
    Logged
    Jeff
    72 Barracuda 340/4spd  Torred
    70 roadrunner 383/auto  In-Violet
    70 Duster 360/auto drag car  (Petty Blue soon)
    04 Ram 2500 5.7 Hemi

    Offline dst

    • Jr. Member
    • **
    • Posts: 26
    • Negated Identity Construct
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #9 on: November 08, 2005 - 10:04:50 AM »
    Thanks for the replies; I’m surprised to get so many replies. ^_^

    As for pictures of my car, for the time being just look at my aviator. That’s my Duster in the background. I’ll post some sometime and will probably make a signature banner with my Duster in it.

    @Killer_Mopar: You may not have seen me but I know I’ve seen that aviator.

    @dodgetkboy78: Where is your stressed out aviator from MC?

    @torredcuda: I was thinking of staying under 4000 RPM, which I’m thinking should not damage anything with my stock pump, right??? I was looking at Holley but will probably make a thread asking for recommendations later.
    I think I’ll start with a ‘Which cam should I go with’ thread.
     
    Thanks for your comments:
    -dust
    Logged
    There are those who have fallen and those who are going to fall.

    dodgetkboy78

    • Guest
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #10 on: November 08, 2005 - 11:44:53 PM »
    Quote
    @dodgetkboy78: Where is your stressed out aviator from MC?

    It is at Moparchat, because that place is perplexing! They just like to fight, and be rude there.
    Here and Hamcar, I am the "post hole digger", It fits me better.
    Logged

    Offline Andrew

    • Resident
    • *****
    • Posts: 2521
    Re: Another A-body guy, 408 4spd ^_^
    « Reply #11 on: November 09, 2005 - 12:01:08 AM »
    Quote from: dodgetkboy78 on November 08, 2005 - 11:44:53 PM
    It is at Moparchat, because that place is perplexing! They just like to fight, and be rude there.
    Here and Hamcar, I am the "post hole digger", It fits me better.
    Oh, its a post hole digger.

    I thought he was shoveling sh|t.
    Logged
    Pages: [1]
    « previous next »