Auto or 4-speed (PIC)

Author Topic: Auto or 4-speed (PIC)  (Read 4129 times)

Offline Mr. 6pak2go

  • Resident
  • *****
  • Posts: 2266
  • Restore it dont crush it!
Re: Auto or 4-speed (PIC)
« Reply #15 on: November 23, 2005 - 07:37:44 PM »
I did NZ,
   But they are adjustable. You don't have to drop the tranny to play with them. A little tightening of a screw-like-thingie, and you can make it shift harder, or softer.

  Mike
yea i havent got to run mine yet but im gonna have to set mine im sure!! it it said to turn the little adjuster two full turns then back it of 25 degrees or something like that but im not sure if i got it exacly right we will see!
My family, My cars, My guns three things il fight for!!




Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Auto or 4-speed (PIC)
« Reply #16 on: November 23, 2005 - 07:40:35 PM »

By "slight delay" what do you mean exactly? Say, in normal street driving, does the transmission and shifts feel stock?
I'm wanting to buy one but don't want to be taking my Mum for a drive to dinner or something and cruising at 30mph the car is shifting like Big Daddy tunned it!! LMAO I f I knew if only banged through gears under full or performance throttle I'd but it!

Thanks MEK

OK,
  I don't want to mislead you. As it was stock, I was in third gear probably at 10 MPH. I never felt anything. With the shift kit, I hit second gear at about 1200 RPM going easy. Not much of a snap of the neck. But if you get on it from the start, the upshift is definitely harder(and funner), you have to really get on it to snap you neck at both upshifts(from second to third), so what I'm saying is, at normal driving conditions, your mother won't notice much. She really won't.

  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Mr. 6pak2go

  • Resident
  • *****
  • Posts: 2266
  • Restore it dont crush it!
Re: Auto or 4-speed (PIC)
« Reply #17 on: November 23, 2005 - 07:41:27 PM »
if you have a good stall it orda run fine everyday driving!! the stall should only engage if your foot is on the break!! then it want kick in till you get past 2500 right? i think thats how they work!! but if your just pulling off a stop sign you dont have to rev it to 2500 or whatever your stall is before it goes anywhere!! im pretty sure thats how they work i guess we will find out!
My family, My cars, My guns three things il fight for!!

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Auto or 4-speed (PIC)
« Reply #18 on: November 23, 2005 - 07:47:43 PM »
OK,
  I don't want to mislead you. As it was stock, I was in third gear probably at 10 MPH. I never felt anything. With the shift kit, I hit second gear at about 1200 RPM going easy. Not much of a snap of the neck. But if you get on it from the start, the upshift is definitely harder(and funner), you have to really get on it to snap you neck at both upshifts(from second to third), so what I'm saying is, at normal driving conditions, your mother won't notice much. She really won't.

  Mike


Thanks Mike that's what I needed to hear!! And, stop talking about my Mum! lmao j/k

So how do you set it up? Do I just take it into a prefessional transmission shop? Stall, converter?!?!


1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline Mr. 6pak2go

  • Resident
  • *****
  • Posts: 2266
  • Restore it dont crush it!
Re: Auto or 4-speed (PIC)
« Reply #19 on: November 23, 2005 - 07:50:30 PM »
i did mine my self just follow the directions it aint bad!!! when i was doing mine i took the valve body plate off and the directions said now discard it! i was like wth?? discard it?? i have a problem with throwing stuff away lol! i wasnt sure if i would need it again lol!!
My family, My cars, My guns three things il fight for!!

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Auto or 4-speed (PIC)
« Reply #20 on: November 23, 2005 - 07:52:34 PM »


LOL!! Nothing on Lucy will be done by myself except maintance, detailing, cleaning and polishing parts etc.
My NEXT car, that's a different story!!! I'll talk to the resto team about it.......


Thanks for the info lads!!
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline Mr. 6pak2go

  • Resident
  • *****
  • Posts: 2266
  • Restore it dont crush it!
Re: Auto or 4-speed (PIC)
« Reply #21 on: November 23, 2005 - 07:59:15 PM »
well thats ok to!! i done everything on my dart including body and paint!! if i get to keep the cuda or i get another cuda i will do everything exept hte body and paint lol!! cudas are to valuable to screw up! so are challengers ;-p lol!! if i ever get any other cars il do everything my self im very pleased with hte dart i think it turned out great there are no really bad waves you cant see no bodo lines or nothing im happy with my work!! the paint still needs another coat its kinda thin in places but il get that takin car of as soon as it warms up a little!!
My family, My cars, My guns three things il fight for!!

Offline chevyconvert

  • HvacMan
  • Sr. Member
  • ****
  • Posts: 1693
  • Member since November 04, 2005
Re: Auto or 4-speed (PIC)
« Reply #22 on: November 28, 2005 - 10:20:41 PM »
NZ I've had a transgo tow & go shift kit on my "other brand" car for 24 years with no problems. It makes them shift with less slippage so they last longer.
All automatics should have them imo.
Eric
'70 Hemi Orange RT/SE 440 Six Pack Pistol-Grip 4 speed
Bay Area California