E-body parts

[moparnocar]

72-74 cuda tail lites-55.00set no rings also sets with rings-100.00/set
front window regulators-15.00ea
front glass-50.00ea
sections of front frame rail. 2' towards the rear-30.00ea
rear leaf springs-30.00pr
defrost dust-15.00
non rallye lite bar-25.00
71-74 column shift steering column housing-25.00
slapstick brackets that mount to the trans tunnel-25.00set
drip rail moldings-60.00set
dash frames-50.00ea
Dutchman panel w/speaker tray (factory)160.00
1970 hood hinges-60.00pr
1971-74 hood hinges-50.00pr
fender splash shields-35.00pr
headlite splash guards-40.00pr
dash ashtrays-20.00
dash glove box lid blk-15.00
Dash center speaker grille (slight warp)-25.00
1970-71 Gran coupe door panel emblems-35.00pr
72-74 rear view mirror-25.00
gas pedals-5
Black kick panels-65.00pr
Lower right dash bezel below radio-55.00
radio bezel needs redo-25.00


prefer not to ship big items. located in WI.  mopar_maniac68@yahoo.com

[JimCuda]

Do you still have the Front and Rear cuda glass? Is it tinted or clear, I'm looking for tinted?

Do you also have Driver side glass? The Door and 1/4 glass, tinted as well?

[cuda340shaker]

Do you have a tranny crossmember for a Cuda?

[moparnocar]

Do you have a tranny crossmember for a Cuda?

Ok from my exoeriences parting out a few I have noticed two different ones. I have one of each. The mounting holes to the torsion x-member are different. Do u know which one u need?

[cuda340shaker]

Ok from my exoeriences parting out a few I have noticed two different ones. I have one of each. The mounting holes to the torsion x-member are different. Do u know which one u need?

I wish I did. The car came with no motor, trans, x-member .... Is there any information I can give you to help determine which one I might need?

It's a real early '70 (August 30,1969), 340 automatic, if that helps??

[moparnocar]

I wish I did. The car came with no motor, trans, x-member .... Is there any information I can give you to help determine which one I might need?

It's a real early '70 (August 30,1969), 340 automatic, if that helps??

I'm pretty sure u need the bigger one then. On each side there is 2 holes to mount to the x-member. Give me the distance between just two. thanks  That's going to be 50.00 plus shipping

[JimCuda]

Do you still have the Front and Rear cuda glass? Is it tinted or clear, I'm looking for tinted?

Do you also have Driver side glass? The Door and 1/4 glass, tinted as well?

[moparnocar]

Do you still have the Front and Rear cuda glass? Is it tinted or clear, I'm looking for tinted?

Do you also have Driver side glass? The Door and 1/4 glass, tinted as well?

no rear. Front drivers side tinted I would have. Has some light scratches not perfect. 60.00 plus shipping.

[JimCuda]

Got a picture of it? Close-up of the scratches?

[Grancoupe]

"front window regulators-15.00ea"
Looking for the driver's side.
Also let me know if the d side tinted door glass dosn't go to JimCuda. My car is a driver, not show so I don't mind a few minor scratches. The glass I currenly have is not tinted and scratched deeply because the regulator is shot and the glass hit the trackks...

[70 rtse]

Can you let me know what the hood hinges are like and do you have the hinge cover for a 70 e body bucket seat.

[moparnocar]

Can you let me know what the hood hinges are like and do you have the hinge cover for a 70 e body bucket seat.

What's your email? I'll send u pics

[70 rtse]

my email is centotiling@optusnet.com.au

[cudagirl99]

Do you have front suspension parts for 1973 barracuda?  Where are you located?

[moparnocar]

Do you have front suspension parts for 1973 barracuda?  Where are you located?

I'm in WI. What kinda front suspension parts?