Members Engine Bay Photos

[BacardiCBR]

Hey Brent, what's up?  Dragula already answered your question in an earlier post - Summit non-branded option valve covers

[BruteForce]

As you can see, my 340 engine bay is a work in progress. The ignition system needs a coil, lots of wiring to be done, and the cooling and fuel systems have yet to be attached.

[cj]

Here's mine...I think...having a hard time with the pics

[arcticmopar]

Here is a mine 1st couple from this spring still undergoing a overhaul and the next two are from the car show last weekend.
Update: new short block from Indy...project in state of flux.

[quapman]

Here's a "before"...

and after fresh paint. More after final assembly!

[wagesofsin]

looking good steve!

and all the rest are awesome as well.   

[thenuke1]

Ill do a before and After sorta thing






ill take a pic of what it looks like today in the morning

[72rtchallenger]

here are a few of my engine and a link to my project restro
http://www.cardomain.com/ride/399010

[moparmaniac59]

This is my 543 stroker. I finally got it installed in my Challenger and running after removing the old 440 and having engine bay painted. I replaced a lot of the under-the-hood wiring as well. The motor is quite nasty and made over 600 HP on the dyno with 651 ft/lbs of torque. As you can see, I still need to make up some clips and hook up the kickdown linkage ect. It looks 150% better than that old rattle can black paint!! I know one thing; at least for me, doing an engine swap by yourself isn't easy and I was a little rusty on a complete changeout as I hadn't done one in over 20 years. I had a lot of headaches to work thru (had to notch out the K-frame for the external oiling sys), but it runs now like mad hornet!! Let's burn some rubber now!!


                               Matt B.

[Hemi Dude]

This is mine, Crate Hemi, StageV manifold, two Edelbrock 600's, TTI polished headers, custom pulleys in my Sublime 70 Challenger. 

[71Plym]

This is the 500" stroker in my 71 Cuda.

[JimSC]

I must confess this is a 1:18 scale die cast - but is mine.

[dutch]

awesome 

[Confederate Cuda]

Thought I would add mine.

[kmyles]

Here are some before and after shots
Before


 
And After (in progress)