Hemi torqueflite parts

[Topcat]

Today, while over at a friends house, He gave me some old A/T Mopar parts. One was the tail piece that bolts to the A/T. Thats the one the drive shaft goes into.  He told me they're from a Hemi Torgueflite. Also, I got a 4 gear planetary assy. from it. There are some more parts there besides to it. Are there any more parts to it that I should look for that are of value? The main case is gone. And now my camera is broken for right now until I get it fixed. So no pics right now unfortunately. Please tell me, what should I look for that might be important or worth salvaging from this pile of supposed Hemi Torgueflite parts. Thanks

[tactransman]

The parts you have really are not that valuable. The parts in a hemi torqueflite that are valuable is the high gear drum and intermediate band that goes around it.Also the case (for numbers matching)

[Carlwalski]

How do you know if you have a "HEMI" TorqueFlite or a "Regular" TorqueFlite?? 
Are the HEMI trans the Heavy Duty D32 option on the Fender or......


 

[Topcat]

The parts you have really are not that valuable. The parts in a hemi torqueflite that are valuable is the high gear drum and intermediate band that goes around it.Also the case (for numbers matching)

OK, Thanks. So then I presume the main shaft doesn't have a different spline count like a 833 does.
But isn't a 4 gear planetary a desirable part to have on a rebuild/assembly? From what I what was told to me before, 4 gear planetarys were only inside HP A/T trans.

[tactransman]

OK, Thanks. So then I presume the main shaft doesn't have a different spline count like a 833 does.
But isn't a 4 gear planetary a desirable part to have on a rebuild/assembly? From what I what was told to me before, 4 gear planetarys were only inside HP A/T trans.

:undercar:
The input shaft splines are different by year of transmission not by hemi or not. Pre-'67 -19 spline , '67 on 24 spline. The 4 gear planetary can be found in alot of transmissions(mostly big blocks) . I have a couple of Indy Motor race cars that are running 3 gear planetaries running 9.50's in the quarters and leave the starting line with 2 feet of air under the front tires and the three gear planetaries are holding up fine(I check them for freshing up every winter)

[Topcat]

Thanks again so much.  Well, if anybody wants em cheap, let me know.

[Carlwalski]

How do you know if you have a "HEMI" TorqueFlite or a "Regular" TorqueFlite?? 
Are the HEMI trans the Heavy Duty D32 option on the Fender or......


 

Ahhhhh,  anyone know? 

[tactransman]

There is a part number stamped on the case right above the trans pan rail by the shifter linkage . I don't know the part number for a "Hemi Torqueflite" but that is where it would be. If you take one apart you can tell by the insides.

[Topcat]

Hmmm, now ya got me thinkin.  This guy (idiot) took a Hemi torqueflite apart and built a whole new torqueflite out of all the parts. There is a very good chance he still has the case. And I'm sure if it really is a Hemi torqueflite, like he claims it may be for sale. So what would a Hemi torqueflite body be worth?

[Carlwalski]

There is a part number stamped on the case right above the trans pan rail by the shifter linkage . I don't know the part number for a "Hemi Torqueflite" but that is where it would be. If you take one apart you can tell by the insides.

Thanks mate, hopefully Joe (FY1) sees this thread and can help out with location and number reference.


Cheers.