In your opinion, what's the toughest wheel combo on Challengers?

Author Topic: In your opinion, what's the toughest wheel combo on Challengers?  (Read 4787 times)

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #15 on: May 12, 2006 - 10:16:01 PM »
I had a 15x7 front with a 235x60x15 tire with a 3-5/16 backspacing. This is just like your front combo. I like my front low and it rubbed going around turns while going into "curb" driveways.  I had to puti little 215x60s in the front, like yours, to keep from rubbing, but they looked small. I did not have the hemi-type bulged fenders, so yours might not rub.

Your 255-70 rears are wide but also tall so might fit if you only run the 7" wheels, but those look too skinny for the drag look.

When choosing wheels remember e-body 7" wheels had a 4" backspacing. You usually have to go both ways as you widen them. Like the 8" rallyes for example. You added an inch, but split it by adding half an inch to the back spacing and half to the front. That's why an 8" wheel with a 4.5 backspace fits so well. A 9" wheel shoulg have a 5" backspace. 
If you choose a wheel on looks, it'll probably have the 3-3/8 backspace, it'll probably also rub and you won't be happy.
Rob
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0





Offline Prowler Orange Challenger

  • Full Member
  • ***
  • Posts: 628
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #16 on: May 12, 2006 - 11:33:08 PM »
Thanks shelbydogg and oh 73318 they're made by American Racing.

Offline EVIL72

  • Sr. Member
  • ****
  • Posts: 1244
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #17 on: May 12, 2006 - 11:40:07 PM »
Evil, Are those centerlines in your picture? Those also say "not for street use" on them under the cap. I ran those for years and always worried about them.

NZ, did you know that your center caps are year correct for the '71?

Rob
Yea I'm running Centerline autodrags but the only thing it says under my caps on the 15x7's and the 15x8.5's is the max load rating. The set of 15x3.5's that I'm still using to hold up the front of my Duster don't say anything.  I know on the web site they say for auto OR drag racing but not for truck or vans. My rims are all very old so maybe they started marking the newer ones  :dunno:
 I wouldn't worry about running Centerlines on the street, everyone around had them in the 80's including me and the only problem they had was you always had one or two that leaked air  :banghead:, but all an all there a pretty tough rim and feel solid.
  But if I pick up my 15x3'5 and 15x15 weld Prostars and there is nothing to those rims.
 A street/strip weekend car might be fine with them as long as they stayed away from rough roads and fast corners.
ROB
1972 Dodge Challenger 340ci
1970 Pro Street Duster (Under Construction)

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #18 on: May 12, 2006 - 11:51:05 PM »
NZ, did you know that your center caps are year correct for the '71?

Rob


Yip, sure do mate!! IMO they make the wheel. They break up all the silver argent with dark center caps.  :smokin:

I've got a set of 70 caps incase I want to be "correct"  :grinno: :bigshades:


 :thumbsup:
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline Robb

  • Sr. Member
  • ****
  • Posts: 1006
  • Member since: March 20, 2003 - 09:52:47 AM
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #19 on: May 13, 2006 - 12:28:41 AM »
I had a 15x7 front with a 235x60x15 tire with a 3-5/16 backspacing. This is just like your front combo. I like my front low and it rubbed going around turns while going into "curb" driveways.  I had to puti little 215x60s in the front, like yours, to keep from rubbing, but they looked small. I did not have the hemi-type bulged fenders, so yours might not rub.

Your 255-70 rears are wide but also tall so might fit if you only run the 7" wheels, but those look too skinny for the drag look.

When choosing wheels remember e-body 7" wheels had a 4" backspacing. You usually have to go both ways as you widen them. Like the 8" rallyes for example. You added an inch, but split it by adding half an inch to the back spacing and half to the front. That's why an 8" wheel with a 4.5 backspace fits so well. A 9" wheel shoulg have a 5" backspace. 
If you choose a wheel on looks, it'll probably have the 3-3/8 backspace, it'll probably also rub and you won't be happy.
Rob



What about the 15 x 7 Torq Thurst D wheels by American Racing ?    they have a back spacing of 3-3/4

tire sizes of 275-50-15 in back and 215(225)-60-15 in front ?

((((getting bored with the rallyes)))) :faint: :bricks1:







70 Challenger SE  (440 SIX PACK / Keisler 5 speed, R/T SE replication)       68 Sport Satellite Convertible 383 Super Commando / 727  Survivor

2002 Trans AM WS6 convertible:  DD
1999 4Runner 4x4:  lifted-locked-armored  expedition vehicle
1990 Jeep XJ 4x4:  Front Dana 60, GM-14bolt rear, 3 link, 4link, 5.38 detroits, beadlocked 40's, stretched to 110" wb  Rock Crawler

Offline EVIL72

  • Sr. Member
  • ****
  • Posts: 1244
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #20 on: May 13, 2006 - 12:50:47 AM »

What about the 15 x 7 Torq Thurst D wheels by American Racing ?    they have a back spacing of 3-3/4

tire sizes of 275-50-15 in back and 215(225)-60-15 in front ?

((((getting bored with the rallyes)))) :faint: :bricks1:









 I really like those wheels  :thumbsup:
 I like them without the center polished, a guy with a black GTX had some fat ones on his car at a show, his car sat nice and squaty and it looks so mean!!!
ROB
1972 Dodge Challenger 340ci
1970 Pro Street Duster (Under Construction)

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #21 on: May 13, 2006 - 03:03:09 AM »

My second favorite after Rallyes are the dog dish hub cap cop rims...... :drool: :bananasmi


« Last Edit: June 16, 2006 - 10:45:14 PM by Rev-It-Up »
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline Prowler Orange Challenger

  • Full Member
  • ***
  • Posts: 628
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #22 on: May 13, 2006 - 06:26:54 AM »
Robb I think those would look good on your car make it more of a 2Fast2Furious Clone.

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #23 on: May 13, 2006 - 08:05:42 AM »

What about the 15 x 7 Torq Thurst D wheels by American Racing ?    they have a back spacing of 3-3/4

tire sizes of 275-50-15 in back and 215(225)-60-15 in front ?



Robb, That might be okay up front with the 235s, but what about the rear?  Please don't put 275-50s on a 7" wheel.  What do they offer in backspacing for an 8" or 9" wheel?   

For me, I've had my car all through the 80s with cragar S/Ss, through the 90s with centerlines, so for the 2000s, I had to go back to Rallyes to try to give it the original look.       But those wheels look sharp! 

NZ, that '71 Cuda would look so much better with Rallyes.   C'mon admit it.    Then maybe a white billboard.

Rob
« Last Edit: May 13, 2006 - 08:14:29 AM by shelbydogg »
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #24 on: May 13, 2006 - 08:33:19 AM »
NZ, that '71 Cuda would look so much better with Rallyes.   C'mon admit it. 

Rob

Yeah, I know....that's why I said Rallyes were my number one.  :screwy:  :lol: then Steel wheels a close second.

 :swaying:
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline ShelbyDogg

  • Sr. Resident
  • ******
  • Posts: 5007
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #25 on: May 13, 2006 - 09:27:22 AM »
He needs to fix his parking brake.
« Last Edit: May 13, 2006 - 09:30:20 AM by shelbydogg »
Rob

3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

My Pace Car restoration thread:
http://www.cuda-challenger.com/cc/index.php?topic=44869.0


Offline 1BADFISH™

  • Resident
  • *****
  • Posts: 2805
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #26 on: May 13, 2006 - 09:43:14 AM »

Yip, sure do mate!! IMO they make the wheel. They break up all the silver argent with dark center caps.  :smokin:

I've got a set of 70 caps incase I want to be "correct"  :grinno: :bigshades:


 :thumbsup:

I did the same thing, guy who sold me my wheels says he sells about 1-2 sets of 70 centers a year to the people who want "correctness" everyone else likes the darker centers.

Dave
Charlottetown, PE
2014 GMC Sierra Crew Cab White Diamond edition.
1970 Dodge Challenger 340-6 4spd.
*Member Since* Oct 11, 2005

Offline Robb

  • Sr. Member
  • ****
  • Posts: 1006
  • Member since: March 20, 2003 - 09:52:47 AM
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #27 on: May 13, 2006 - 10:45:51 AM »
Robb, That might be okay up front with the 235s, but what about the rear?  Please don't put 275-50s on a 7" wheel.  What do they offer in backspacing for an 8" or 9" wheel?   
Rob

I have the 275/50's on 7's now.   :dunno:

When I had Magnum 500s I ran 8 inch tires on the back (same tires) and they rubbed just a little when the rear springs compressed but nothing serious.    I then went to Rallyes and ordered 2 7s and 2 8's but they sent me 4 7's.    I mounted them anyway and I have to admit something about the way the 7's tucked into the rear a bit more uniformly and it simply had a overall smoother look to the whole car than what the 8's in the back gave me. 

the 275's in a 50 series, dont "appear" to bulge like a person might otherwise think.    :popcorn:
---------------------------------------------

OH YEAH..   I forgot that the 2F2F challenger had those rims.   Ill have to search some pics to see how they look on that car.   Im not sure I want to be seen as cloning that movie car, necessarily. :dunno:

70 Challenger SE  (440 SIX PACK / Keisler 5 speed, R/T SE replication)       68 Sport Satellite Convertible 383 Super Commando / 727  Survivor

2002 Trans AM WS6 convertible:  DD
1999 4Runner 4x4:  lifted-locked-armored  expedition vehicle
1990 Jeep XJ 4x4:  Front Dana 60, GM-14bolt rear, 3 link, 4link, 5.38 detroits, beadlocked 40's, stretched to 110" wb  Rock Crawler

Offline Prowler Orange Challenger

  • Full Member
  • ***
  • Posts: 628
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #28 on: May 13, 2006 - 11:17:21 AM »
Robb, ask ye shall recieve:








Offline Robb

  • Sr. Member
  • ****
  • Posts: 1006
  • Member since: March 20, 2003 - 09:52:47 AM
Re: In your opinion, what's the toughest wheel combo on Challengers?
« Reply #29 on: May 13, 2006 - 11:43:39 AM »
thanks POC,   :bananasmi

I searched Yahoo and wasnt coming up with much.   

70 Challenger SE  (440 SIX PACK / Keisler 5 speed, R/T SE replication)       68 Sport Satellite Convertible 383 Super Commando / 727  Survivor

2002 Trans AM WS6 convertible:  DD
1999 4Runner 4x4:  lifted-locked-armored  expedition vehicle
1990 Jeep XJ 4x4:  Front Dana 60, GM-14bolt rear, 3 link, 4link, 5.38 detroits, beadlocked 40's, stretched to 110" wb  Rock Crawler