News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1]

    Author Topic: rev limiter  (Read 1525 times)

    Offline SJwithaRT

    • Jr. Member
    • **
    • Posts: 11
    rev limiter
    « on: May 31, 2006 - 03:12:56 PM »
    I need whatever info can be given on rev limiters, i was told we should install one on the challenger, (burnouts), just wondering what i should be looking for, how much to spend, what brand, how to install. Any info would be greatly appreciated. thanks
    Logged


    Offline Robb

    • Sr. Member
    • ****
    • Posts: 1006
    • Member since: March 20, 2003 - 09:52:47 AM
    Re: rev limiter
    « Reply #1 on: May 31, 2006 - 03:37:47 PM »
    If you have an MSD 6AL ignition box, its just a plug-in "plug" and you can select the rpm limit you want.
    Logged

    70 Challenger SE  (440 SIX PACK / Keisler 5 speed, R/T SE replication)       68 Sport Satellite Convertible 383 Super Commando / 727  Survivor

    2002 Trans AM WS6 convertible:  DD
    1999 4Runner 4x4:  lifted-locked-armored  expedition vehicle
    1990 Jeep XJ 4x4:  Front Dana 60, GM-14bolt rear, 3 link, 4link, 5.38 detroits, beadlocked 40's, stretched to 110" wb  Rock Crawler

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: rev limiter
    « Reply #2 on: June 02, 2006 - 11:42:52 PM »
    MSD also has a good rev limiter that works with the Mopar electronic ign too for around $80 
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline slsc98

    • Jr. Member
    • **
    • Posts: 284
    Re: rev limiter
    « Reply #3 on: December 31, 2012 - 11:53:18 AM »
    Quote from: Chryco Psycho on June 02, 2006 - 11:42:52 PM
    MSD also has a good rev limiter that works with the Mopar electronic ign too for around $80

    'Morning Cp and Happy New Year!

    Question: any update on  part # / item availability for this particular MSD product?

    I ask as, I just got off the phone with MSD's tech. dept and they quickly pointed me to MSD Part # 6425, for well over $200.

    Then, when I went web-surf shopping, the majority of the posts that come up are customers complaining about the 6425 failing, crappy customer service, etc.

    Only reason I am even going down this road is I installed a McLeod diaphragm clutch onto my '73 Chally's original 1"/23-spline trans and NON-original 440 (out a '70 GTX). And, I removed the over center spring. I am not racing, just street use with an occassional (very infrequent) line jump, etc.

    Any insight appreciated!
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: rev limiter
    « Reply #4 on: January 05, 2013 - 10:35:23 PM »
    no insight , it has been a few years since I bought one . I have had problems with MSD stuff too
     not sure what to recommend as a stand alone system
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline jhaag

    • Full Member
    • ***
    • Posts: 616
    Re: rev limiter
    « Reply #5 on: January 15, 2013 - 02:36:51 PM »
    msd 8728..works with oe electronic ignitions. about $120. comes with 3 rpm chips. can buy chips for different rpms if desired. the bulk of racers use MSD products without problems. personal experience, worked for a driving school with a fleet of over 100 race cars putting over 2 million miles per year on the fleet. used msd ignition, dist, and coils, with minimal problems. highly recommend them.
    Logged
    love 70 Challengers

    Offline jimynick

    • Resident
    • *****
    • Posts: 4512
    Re: rev limiter
    « Reply #6 on: January 15, 2013 - 10:39:15 PM »
    Wasn't there a thread on here recently about a new ignition box and I believe it had rev limiter capability built into it? Can't remember the name, though. Seek and ye shall find..... :wave:
    Logged

    Offline 72challenged

    • Jr. Member
    • **
    • Posts: 109
    Re: rev limiter
    « Reply #7 on: January 15, 2013 - 11:25:24 PM »
    My control box has adjustable Rev limiter, good folks

    http://4secondsflat.com/Ignition.html
    Logged
    72' Challenger Rallye, Lt Gunmetal Metallic, 360/4, 727, 8 3/4 sure grip, a/c ps pb, Bilsteins,  mini like wheels, BFG 245/60 15's

    Thanks to R/T Spec., Year1, Jeg's, Napa Lyndon, Bohn services, Mopar Joe, Bell Motors, paint by Ray, Evans elect., MCB, Totally Stainless, Moparts, FBO, Mike the Car, Firm Feel, Unique Fab,

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re: rev limiter
    « Reply #8 on: January 16, 2013 - 05:33:17 AM »
    the Rev N Ator ECU has a rev limiter & is supposed to be a better ECU overall
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline 73EStroker

    • Sr. Member
    • ****
    • Posts: 1343
    Re: rev limiter
    « Reply #9 on: March 01, 2013 - 08:29:09 PM »
    Mallory 6AL CD digital box has the rev limiter built in and can be adjusted in 500rpm increments from 4500 to way over 8000. I believe it is around $200.
    Logged
    Barry (Salmon Arm)
    Pages: [1]
    « previous next »