best deal on shaker air cleaner assembly?

[EvilTwinATX]

I have decided to build my big block and do an R/T clone... with a shaker if possible. 
I am leaning towards one place to get the conversion kit from (hint: it rhymes with "ARMS") but need to find a good source for the shaker air cleaner assembly. Do C-C members get a discount anywhere? Please give me suggestions for vendors... at least those who are reasonably priced.

I need:
base plate (4bbl)
adapter ring
shaker bubble
bubble vents
Warm and cold air doors (optional)
Door cables(optional)
am i missing anything?

Brent

[EvilTwinATX]

Bueller....Bueller....

[Chryco Psycho]

4 bbls have support brackets ,6 pack & dual 4 do not , you also need the aircleaner lid & element

[Blackcuda]

sixpackperformance.net has everything you need.

[EvilTwinATX]

sixpackperformance.net has everything you need.

let me re-phrase... PRICE IS A CONCERN.

550 (base plate/adapter/lid)
400 (bubble)
300 (air doors)
250 (grills)
_______
$1500 and this doesn't include cables, element, support feet or anything else! 

I cannot afford this... any other suggestions?

[Blackcuda]

let me re-phrase... PRICE IS A CONCERN.

550 (base plate/adapter/lid)
400 (bubble)
300 (air doors)
250 (grills)
_______
$1500 and this doesn't include cables, element, support feet or anything else! 

I cannot afford this... any other suggestions?

I can understand price is a concern, but your trying to install the hottest setup on a ebody there is, and you don't want to install junk.
If your lucky you might find the stuff on ebay, but people there ask for an arm and a leg also.
Good luck.

[MEK-Dangerfield]

If price is a big concern, then just go with the Rally hood. The shaker stuff is WAAAY out there, price wise.

  Mike

[EvilTwinATX]

Sorry... I hope I didnt come off rude. It just seems that some pricing is just ridiculous and some vendors take advantage of that. Having a bad day and tired of everything I want being so damned expensive! 

[MEK-Dangerfield]

Sorry... I hope I didnt come off rude. It just seems that some pricing is just ridiculous and some vendors take advantage of that. Having a bad day and tired of everything I want being so d**ned expensive! 

Hey,
  Welcome to the club.       There are alot of vendors, and sellers on E-Bay that try to gouge us. You are wanting a most desireable item though, I don't know any cheap way to go about it. Like I mentioned earlier, a Rally hood looks plenty fine to me. 

  Mike

[Bullitt-]

Heck for that kind of money you should just cut a hole in the hood & put a blower thru it. 

[MEK-Dangerfield]

Heck for that kind of money you should just cut a hole in the hood & put a blower thru it. 

You know what???

  People would probably love it just the same. 

  Mike

[Chryco Psycho]

Ben Snobar has the stuff too but I doubt it will ba any cheaper , Harms has some stuff too

[ChallengerGary]

If originality is not a huge concern, Year One sells a fiberglass baseplate and adapter ring (about 125 each) and there is a guy in Canada (don't remember the name) that sells fiberglass shaker bubbles.  Doing this will put you around $400.00 for those three pieces.  You'd still need to buy the grilles (vents) and the rest but it will end up being around 1/2 price or less.

[fishn4cuda]

There is not a cheap way to do a shaker hood that functions. I have seen a full fiberglass one that has the ring and bubble moulded into the hood. I'm not sure how much or who makes it. It does look good for the non purest.