Mopar 440 For Sale:
Mopar 440 Complete Engine and 727 Transmission and TCI stall speed
The block is a 9-22-71 casting 30 over, decked, resurfaced, balanced and align bored with brass freeze plugs. Stock 375 steel crank turned 10/10 stock rods reconditioned and balanced with hardened ARP rod bolts. Mancini billet rear main seal retainer, super street manual fuel pump. Speed-Pro forged pistons 9.5:1 file to fit Perfect rings, 906 heads with pocket porting. Manley stainless steel 2.14 & 1.81 valves, Crane double springs and retainers. New Mopar Performance rocker arms, pushrods and purple shaft cam. The cam is P4452993 Hydraulic, 280 duration 474 lift centerline 110. Cloyes true roller timing chain and gears. High volume oil pump, Milodon 7qt oil pan with baffles. Mopar performance black wrinkle wall valve covers. Aluminum water pump housing with high volume water pump. March under drive pulleys, BHJ Dynamics SFI approved harmonic balancer. Edelbrock aluminum dual plain intake, Mopar electronic ignition system. Brand new Schumacher headers. This engine was prepped and assembled by Mullens Machine Shop. All bearings are Clevitte-77 and all fasteners are ARP.-No corners were cut!!
The transmission is a 727 with TCI super shift kit. TCI street fighter stall speed, the transmission has been completely rebuilt.
I am sure that I have forgotten something but for the most part this is a complete minus carb drivetrain ready to go. I will have the engine on a starting stand so that you will be able to hear it run. There is over $2600.00 in the Machine work alone on the engine.
I am asking $4500.00 for everything and I have all the receipts and paperwork.
Located in Illinois
Chris
pdink1978@yahoo.com
