Removal of back seat.

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: Removal of back seat.  (Read 2571 times)

    Offline Srobinson4

    • Jr. Member
    • **
    • Posts: 452
    Removal of back seat.
    « on: July 15, 2006 - 10:06:04 AM »
    I have searched and searched but cannot find the magic spot.  How do I get the back seat of a 73 challenger out?

    SRR
    Logged


    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Removal of back seat.
    « Reply #1 on: July 15, 2006 - 10:23:53 AM »
    on either side at the bottom, about a forth of the way in, there is a hook pointing toward the rear of the car that catches a lateral piece on the seat. you have to push down and back on the on the seat, usually not that difficult but I had added old carpet padding under my seat & I could not get it to go down so I ended up using a hammer & flat screwdriver  ::)  hope yours comes out easyer   :bigsmile:
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline Srobinson4

    • Jr. Member
    • **
    • Posts: 452
    Re: Removal of back seat.
    « Reply #2 on: July 15, 2006 - 10:30:23 AM »
    Thank you very much.

    SRR
    Logged

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Removal of back seat.
    « Reply #3 on: July 15, 2006 - 03:03:43 PM »
    It's pretty easy to figure out if you lift the seat back section out first.


      Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Removal of back seat.
    « Reply #4 on: July 15, 2006 - 04:20:51 PM »
    You have to have the top portion out 1st.  The top comes out when you remove two ½" bolts that you access throught the area where the top and bottom seat come together.
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Removal of back seat.
    « Reply #5 on: July 15, 2006 - 05:04:48 PM »
    Quote from: C O D Y on July 15, 2006 - 04:20:51 PM
    You have to have the top portion out 1st.  The top comes out when you remove two ½" bolts that you access throught the area where the top and bottom seat come together.

        ??????????????    CODY what do you mean?   the bottom comes out first
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline inot2old

    • Sr. Member
    • ****
    • Posts: 1820
    Re: Removal of back seat.
    « Reply #6 on: July 15, 2006 - 07:29:12 PM »
    I thought the bottom had to come out first since the top piece is supposed to be bolted in.
    Logged
    '71 Cuda 

    '70 Charger project
    '05 Crossfire Roadster

    Offline RusTy/SE

    • Sr. Resident
    • ******
    • Posts: 5456
    • Just havin' fun
    Re: Removal of back seat.
    « Reply #7 on: July 15, 2006 - 08:25:03 PM »
     :iagree: That's my understanding as well :popcorn:
    Logged
    Russ
    2001 Durango     1B4HS
    1970 Challenger  JS29U
    Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=27173.0
    Member since December 13, 2002

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Removal of back seat.
    « Reply #8 on: July 16, 2006 - 05:38:51 AM »
    I don't know guys.  :clueless:  My top piece just slides into 2 brackets, or grooves, or whatever you want to call them. No bolts. That's not to say that this is how it's supposed to be since I have discovered a previous owner to be an idiot.  :stomp:


      Mike
    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: Removal of back seat.
    « Reply #9 on: July 16, 2006 - 07:48:22 AM »
    Mike those 2 pieces that you are sliding into the brackets get the 2 bolts that hold the seat back down. I think that you are putting the 2 inside the bracket instead of outside.
    Like Cody said,  a 5/16-1/2" headed bolt keeps the seat back bolted to the floor, but most of us leave the bolts out to get to the trunk.
    « Last Edit: July 16, 2006 - 10:13:49 PM by shelbydogg »
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Offline Srobinson4

    • Jr. Member
    • **
    • Posts: 452
    Re: Removal of back seat.
    « Reply #10 on: July 16, 2006 - 10:23:01 AM »
    I have still had no luck getting this seat out.  Are there any other suggestions for me to consider?  I do not want to destroy the seat in the process.

    SRR
    Logged

    Offline PlumCrazy

    • Jr. Member
    • **
    • Posts: 349
    Re: Removal of back seat.
    « Reply #11 on: July 16, 2006 - 10:30:15 AM »
    Push back on the seat and then lift up, should come right out.
    Logged

    Offline MEK-Dangerfield

    • C-C.com Expert
    • ********
    • Posts: 20946
    • I don't get NO respect! Member since 1/25/2002
    Re: Removal of back seat.
    « Reply #12 on: July 16, 2006 - 10:32:23 AM »
    Yep, that's about it for the seat bottom. Push it back, and lift up from the back of it.


    Logged

    Mike

    1970 Challenger - SOLD
    2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

    Offline Bullitt-

    • Permanent Resident
    • *******
    • Posts: 12167
    • Better Things To Come Member Since 2/16/06
    Re: Removal of back seat.
    « Reply #13 on: July 16, 2006 - 10:38:43 AM »
    There is an opening at the bottom front of the seat bottom where it meats the floor pan. The seat has about a 6"wide by 1" high indntion that creates the opening. I can put my fingers in & touch the hooks that catch the metal of the seat, with a flashlight you sould be able to see. This is whers I hammerd mine loose.
    Logged
    Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
    Screwed by Photobucket!

    Offline ShelbyDogg

    • Sr. Resident
    • ******
    • Posts: 5007
    Re: Removal of back seat.
    « Reply #14 on: July 16, 2006 - 10:39:49 AM »
    The hook looks like this pic.  So looking at it, you have to push back, then pull up and forward.
    Logged
    Rob

    3 E-bodies, Megasquirt-1v3.0, Edelbrock Pro-Flo-1, Holley C950, FAST EZ-EFI; say no to carbs...yes to throttle bodies

    My Pace Car restoration thread:
    http://www.cuda-challenger.com/cc/index.php?topic=44869.0

    Pages: [1] 2
    « previous next »