Author Topic: Is the price OK?  (Read 1725 times)

Offline South of Sydney

  • Jr. Member
  • **
  • Posts: 200
  • If it aint MOPAR it's below par
Is the price OK?
« on: July 25, 2006 - 06:49:13 PM »
HI all

I got a quote on a couple of items I have needed for my 70 Challenger for a while, from a wrecker in SoCal today & just wanted to know if the prices were ok.
He has the parts available which no one else up to this point has, so I guess that makes it hard to argue, anyway what do you guys think.

Right hand side external racing mirror (painted) $350usd & the 2 plastic panels that screw under the instrument cluster & steering column $500usd (for the pair)

Cheers SoS
 
I'm not automotively predjudiced I just prefer the best.




Offline Bondavi

  • Jr. Member
  • **
  • Posts: 390
Re: Is the price OK?
« Reply #1 on: July 25, 2006 - 07:03:09 PM »
Uhm, my best advice to you is to keep looking.

www.moparts.com is a good place to find these at a much more reasonable price.

Heck, someone could be parting out a Challenger and give you these items for a much more reasonable price (i.e. $300 for everything)

But then again, who knows the way Ebody parts prices are going...  :dunno:
« Last Edit: July 25, 2006 - 10:24:06 PM by Bondavi »
David

'70 Challenger R/T FC7 440-6 4spd N96 3.54 Dana - SOLD

Offline Challenger6pak

  • Resident
  • *****
  • Posts: 4084
Re: Is the price OK?
« Reply #2 on: July 25, 2006 - 07:18:11 PM »
I would say the prices are high.  Can you post a pic of the dash parts you need or a pic of your dash showing where they go?
Thanks
1969 Sport Satellite H code convertible, 1970 Cuda 440+6, 1970 Challenger R/T 440+6, 1970 Challenger 383 R/T auto, 1970 Challenger R/T 383 4 speed,1971 Challenger convertible.

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Is the price OK?
« Reply #3 on: July 25, 2006 - 07:24:09 PM »
Not shure which plasic panels your referring to but I paid $100.00 for a used later model(large base) painted mirror.  '70 Repros are going for about $250.00 ++
here is a ebay for a 71-4 lower plasic
http://cgi.ebay.com/ebaymotors/RARE-MOPAR-70-AAR-CUDA-T-A-CHALLENGER-BLACK-DASH-FILLER_W0QQitemZ160009771708QQihZ006QQcategoryZ34206QQrdZ1QQcmdZViewItem
here is three pieces including radio trim
http://cgi.ebay.com/ebaymotors/Cuda-Challenger-Dash-Bezels-Radio-Trim-Heater-Mopar_W0QQitemZ160010377754QQihZ006QQcategoryZ34206QQrdZ1QQcmdZViewItem
here is a heater controll panel
http://cgi.ebay.com/ebaymotors/MOPAR-70-71-CUDA-CHALLENGER-HEATER-CONTROL-PANEL-BEZEL_W0QQitemZ170011320470QQihZ007QQcategoryZ34197QQrdZ1QQcmdZViewItem
A/C -Heater controlls are pricey and I understand the '70 models may use some unique to that year parts that will be higher
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline inot2old

  • Sr. Member
  • ****
  • Posts: 1820
Re: Is the price OK?
« Reply #4 on: July 25, 2006 - 08:00:26 PM »
I am not sure what dash parts you need, but I have a '70 Challenger that I am parting out and it had most of the dash peices.  I just paid $250 for the whole car, so I will sell you a couple plastic parts for a lot less than $500.
Sorry I can't help you with a mirror though, he is very high on that too.  I saw a bunch at Carlisle for a lot less.  I would keep checking ebay, or see if you can find someone going to Mopar nats that would be willing to look for parts for you.
'71 Cuda 

'70 Charger project
'05 Crossfire Roadster

Offline bruceschally

  • Jr. Member
  • **
  • Posts: 6
Re: Is the price OK?
« Reply #5 on: July 25, 2006 - 08:08:13 PM »
if this SoCal wrecker is daryl finch you can bet your going to pay full POP,i say look elsewhere

Offline JS27N0B

  • Resident
  • *****
  • Posts: 4809
  • Member since Jan 28th 2003.
Re: Is the price OK?
« Reply #6 on: July 25, 2006 - 08:59:20 PM »
www.shakerhood.com or http://www.pgclassic.com/ have these mirrors new. I just installed the one from Ben Snobar(shakerhood) and was ok.

I paid $65 for my left lower dash trim last year and have an awesome 71-74 Challenger one for sale now.
1970 Challenger R/T Convertible 383/auto 1 of 516 *now sold after owning for 18yrs
2007 Chrysler Aspen Limited AWD
2013 Tige' RZR 343hp
2016 PCP Challenger SRT Hellcat


Offline South of Sydney

  • Jr. Member
  • **
  • Posts: 200
  • If it aint MOPAR it's below par
Re: Is the price OK?
« Reply #7 on: July 26, 2006 - 01:57:51 AM »
Thanks Guys

This is an example of what's great about this board, people who are willing to help out other enthusiasts. It looks like my gut was right about these prices but as I'd had little success finding these items previously I was almost ready to place the order. By the way brucechally wins a prize for correctly guessing the name of the wrecker.


JS27NOB thanks for the tip on the mirrors, I've never seen or heard of PG classics before & didn't know anyone was reproing those mirrors, are they really OK? Have you dealt with these guys 'cause the site looks a bit dodgy (not sure how the word dodgy travels outside of Australia but it means "suspect" )

inot2old I think bullitt99 has the right idea with the dash panels, 1 surrounds the heater controls & the other the radio I am told the 70 model  is different to the others & my car has A/C so if you can help with those parts let me know. My car also needs a couple of bits of SE trim namely the belt mouldings on top of the right door & the small one on the right 1/4 panel if you have those. 


Thanks again for the input guys it is most appreciated

Cheers SoS     
I'm not automotively predjudiced I just prefer the best.

Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Is the price OK?
« Reply #8 on: July 26, 2006 - 09:00:06 AM »
SOS, you should definitely be able to find the '70-only ribbed dash plastics for a LOT cheaper than that!  If you don't get everything you need from Inot2old, send me a PM and I'll take a look at the Nats for you and see what I can find for a fair price. :2thumbs: (I'll probably send you some photos of any items as well as give my description of the parts as I'll have my laptop and digital camera handy.)
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline inot2old

  • Sr. Member
  • ****
  • Posts: 1820
Re: Is the price OK?
« Reply #9 on: July 26, 2006 - 05:37:31 PM »
I have an extra radio bezel and right lower panel, I also have the heater control panel for a non A/C car.  I  don't know if I still have an extra left lower panel or not.  If you need the A/C bezel, maybe that was why it was so high, I have heard that they are expensive. 


Here is a pic of what I have .
'71 Cuda 

'70 Charger project
'05 Crossfire Roadster

Offline Cuda Cody

  • Resident
  • *****
  • Posts: 3988
  • Vancouver, WA
Re: Is the price OK?
« Reply #10 on: July 26, 2006 - 05:39:23 PM »
Bill, I need that Radio trim peice.  How much?  PM or email me.

Thanks!

I have an extra radio bezel and right lower panel, I also have the heater control panel for a non A/C car.  I  don't know if I still have an extra left lower panel or not.  If you need the A/C bezel, maybe that was why it was so high, I have heard that they are expensive. 


Here is a pic of what I have .
The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

Offline OzCuda

  • Jr. Member
  • **
  • Posts: 479
Re: Is the price OK?
« Reply #11 on: July 28, 2006 - 02:21:28 AM »
Hey SoS, Dodge City (Elko) in Melbourne advised me that they would be getting repro chrome 70 racing mirrors into stock shortly.  I have both mirrors for mine now but it looks like I won't be able to get them successfully re-chromed without damaging the mounts/cabling through disassembly.  I was thinking about getting the repro chrome mirrors for mine as I would prefer chrome to painted and maybe on-sell mine (which would suit painting).  Depends on whether you are after painted or chrome and what the cost quality of the imported mirrors ends up being for mine - something to think about either way.

Just re-read your initial post and you are in the same position as I was with one mirror already? - so my offer may not help as I would probably want to sell both??  I got my RH mirror of ebay for $265 US plus postage I think and probably needs a new mirror glass (little scratched) on top of the repainting.  I'll contact you if I find out anything about the imported mirrors.
« Last Edit: July 28, 2006 - 02:28:12 AM by OzCuda »
'70 Barracuda

Offline South of Sydney

  • Jr. Member
  • **
  • Posts: 200
  • If it aint MOPAR it's below par
Re: Is the price OK?
« Reply #12 on: July 31, 2006 - 01:29:45 AM »
Oz

I think I'm going to give PG Classics a try for the repro painted right hand side mirror. They have quoted me $235 usd plus $25 poatage & as my car is not a nos. matching resto it should dome ok. As for the dash panels I might have to get Elkos chase me down some.

Cheers SoS
I'm not automotively predjudiced I just prefer the best.