Author Topic: moving "sale"  (Read 4445 times)

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
moving "sale"
« on: August 02, 2006 - 05:34:19 PM »
I have a bunch of cuda parts (mostly interior and trim stuff) that I am looking to slim down on (meaning not have 4 of everything anymore) If there is some chrome window trim or interior plastic, or instrument panel stuff you are looking for let me know. I'm moving this stuff to my new place tonight so I can answer specific requests after things are moved over cause I will have touched every last thing I have. Up front, I probably don't have any "rare" kinda stuff but common things that aren't being reproduced I have sometimes 2, 3 and 4 duplicates of. Oh yeah, doors, I have 4 extra doors in various states of disrepair, some with glass, most without, most with door hinges etc. Let me know if you are looking for something and I'll let you know if I have it. If you are in the Sacramento area you are welcome to pick stuff up as I would rather not ship.

Thanks!

Eric

No engines, trans, rear end stuff

And before I get posts asking for a list of stuff, there is way too much to list without getting carpal tunnel syndrome. Just ask if there is something you are looking for.....
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....




Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: moving "sale"
« Reply #1 on: August 02, 2006 - 05:42:55 PM »
my brother is looking for the headlight bezel trim pieces.... they are "C" shaped chrome pieces that clip or attach to the bezel... I think he is looking for the drivers side.

Thanks - Brent

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: moving "sale"
« Reply #2 on: August 02, 2006 - 11:55:59 PM »
All I have is the center trim pieces if I remember right, I'll double check tomorrow. I just got done unloading all that stuff into the garage here at the new house....there's nothing like moving 4 extra doors around.....
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: moving "sale"
« Reply #3 on: August 03, 2006 - 12:04:36 AM »
I have a bunch of non-rallye instrument panel parts, clusters, gauges, lenses, gran coupe woodgrain instrument and switch bezels, other plastic dash parts, none are for an A/C dash though. Umm, other stuff, side markers, rear tail light housings, trim that goes on the top of the driver's and passenger side doors, passenger side woodgrain insert for the door panel (not sure if an option on other than a gran coupe), gran coupe door badges, fan shroud, 26" (pretty sure it's that size) modine 3 core radiator, there's more, if you're looking just ask, if I have something you need, I'm more than reasonable on price.
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: moving "sale"
« Reply #4 on: August 03, 2006 - 12:18:00 AM »
can you send me pics of the radiator, I am interested in that.. I will pass the rest on to my brother...
Has the rad been pressure/leak tested?

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: moving "sale"
« Reply #5 on: August 03, 2006 - 12:41:25 AM »
I'll get some pics tomorrow, I haven't had it pressure tested, but it only has about 7000 miles on it.
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline bigblock4speedman

  • Jr. Member
  • **
  • Posts: 263
Re: moving "sale"
« Reply #6 on: August 03, 2006 - 01:40:08 AM »
Do you have any ralley dash clusters for sale, two spoke steering wheel, pistol grip shilter, hood, left side glass, not tinted, how much if you have them?

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: moving "sale"
« Reply #7 on: August 03, 2006 - 09:47:07 AM »
Hi,

I don't have any rallye gauge stuff at all. I don't have any of the other stuff. The only left side glass I have would be a rear one (untinted), $10 if you want it plus whatever it would cost to ship it if you aren't local to me (sacramento, CA.)
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: moving "sale"
« Reply #8 on: August 03, 2006 - 09:56:13 AM »
I'll get some pics tomorrow, I haven't had it pressure tested, but it only has about 7000 miles on it.

thanks... you can send pics to bp51193 @ yahoo dot com or just post 'em.  :2thumbs:

Offline HemiOrange70

  • Resident
  • *****
  • Posts: 2062
Re: moving "sale"
« Reply #9 on: August 03, 2006 - 10:22:06 AM »
I am intersted in the non rallye woodgrain bezel. Is it in good shape and how much-email is cpayne@mts.net


Chris
Thanks :bigsmile:

Offline dougs bs23

  • Sr. Member
  • ****
  • Posts: 1691
Re: moving "sale"
« Reply #10 on: August 03, 2006 - 01:54:59 PM »
would you by chance have the lenses that go inside the light tubes on the dash? front turn signal lenses and bezels?
see Bill run  go Navy football///fly navy

Offline 70bcuda

  • Newbie
  • *
  • Posts: 1
Re: moving "sale"
« Reply #11 on: August 03, 2006 - 09:38:27 PM »
If you have the center trim pieces for a 70 grill, I am interested in them.  How much for both - email is aoverheu@hotmail.com.

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: moving "sale"
« Reply #12 on: August 04, 2006 - 01:02:12 AM »
Hi,
I have some turn signal lenses and bezels I'm pretty sure-I know they are not "perfect". Sorry I don't have pics tonight, have to go out of town till sunday but I'll be home in the afternoon. I'll get pics of the radiator, trim, bezel, turn signals and other assorted stuff then and post them....
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....

Offline 41husk

  • Full Member
  • ***
  • Posts: 605
Re: moving "sale"
« Reply #13 on: August 04, 2006 - 12:05:48 PM »
I could use a set of bumpers for a 73 cuda.
1969 Dodge Charger Daytona Clone 440/727
1970 Dodge Challenger Convertible 340/727
1977 Dodge D-700 Car Hauler 361/5spd
2009 Dodge Challenger SRT8 6.1/auto

Offline ntstlgl1970

  • Resident
  • *****
  • Posts: 2204
  • T a c o c a t
Re: moving "sale"
« Reply #14 on: August 04, 2006 - 12:27:25 PM »
I don't have any bumpers or other body panels
70 Cuda, 7.0L Gen-III Hemi, Viper T56 w/9310 gearset, 3.91's, Megasquirt MS3x v3.57, Innovate wideband, Firm Feel upper arms, torsion bars, springs and strut rods, QA1 DA shocks. I did everything on this car except the fancy paint stuff and I drive it...and I can't seem to stop messing with it....