News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: [1] 2

    Author Topic: subframe connectors  (Read 7224 times)

    Offline cuda340

    • Jr. Member
    • **
    • Posts: 15
    • I'm a llama!
    subframe connectors
    « on: July 25, 2003 - 09:24:26 PM »
    just wondering who makes some good weld in subframe connectors for  e body.....thanx KS  ???
    Logged


    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re:subframe connectors
    « Reply #1 on: July 26, 2003 - 02:07:16 AM »
    I just bought 4' lenghts of 1" X2" X1/8" wall tubing & made my own
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline mustardketchup

    • Jr. Member
    • **
    • Posts: 263
    • I'm a llama!
    Re:subframe connectors
    « Reply #2 on: July 28, 2003 - 06:58:21 PM »
    cuda340:

         I bought mine from Competition Engineering for $80 or $90.  They are "curved" at one end to fit better around the floor pan.  I'll post a picture of mine.  My car is a convertible and the C.E. connectors are for a non-convertible e-body, so I will have to do a little fitting to my parts.  Chryco's suggestion to use straight 1"x2" square tubing will be stronger than my curved pieces.

    Larry
    Logged

    Offline Pistol Gripper

    • Resident
    • *****
    • Posts: 3124
    • Member since: Dirt was under warranty
    Re:subframe connectors
    « Reply #3 on: July 28, 2003 - 07:08:17 PM »
    M-K,

    Looking forward to picts.  I may need a set myself,  depends on how the car likes the new motor.

    P.G.
    Logged
    O ne
    B ig
    A $$
    M istake
    A merica

    Offline mustardketchup

    • Jr. Member
    • **
    • Posts: 263
    • I'm a llama!
    Re:subframe connectors
    « Reply #4 on: July 31, 2003 - 06:33:29 PM »
    Here are my subframe connectors.  They were purchased from Chassis Engineering, not Competition Engineering like I originally said in my July 28th post.

    [attachment deleted by admin]
    Logged

    Offline mustardketchup

    • Jr. Member
    • **
    • Posts: 263
    • I'm a llama!
    Re:subframe connectors
    « Reply #5 on: July 31, 2003 - 06:35:06 PM »
    And another picture of the connector on the car (passenger side, the front of car is to the left).


    [attachment deleted by admin]
    « Last Edit: July 31, 2003 - 06:36:28 PM by mustardketchup »
    Logged

    Offline Chryco Psycho

    • Administrator
    • C-C.com Guru
    • *****
    • Posts: 36620
    • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
    Re:subframe connectors
    « Reply #6 on: August 01, 2003 - 04:23:37 AM »
    I still need a Digi camera  ::)
     Just installed a set on saturday & you can barely see them ,used 1X2" tube 1" vertical & it is just visible below the rockers
    Logged

    Challenger - You`ll wish You Hadn`t

    Offline Locomotion

    • Jr. Member
    • **
    • Posts: 101
    • IHRA Stock/Footbrake ET
      • Locomotion Racing
    Re:subframe connectors
    « Reply #7 on: January 19, 2004 - 02:55:18 PM »
    If anyone also adds a roll bar with their frame connectors, it helps stiffen the body A LOT if you weld the short, inner angled bars (behind the seats) TO the frame connector!

    Spot-welding the connector to the floor where it touches anywhere along its length also helps.
    « Last Edit: January 19, 2004 - 02:57:41 PM by Locomotion »
    Logged

    Offline 1973challenger360

    • Resident
    • *****
    • Posts: 2385
    Re:subframe connectors
    « Reply #8 on: January 19, 2004 - 11:21:56 PM »
    how much work is it to install a roll bar ?
    Logged
    1965 barracuda. Was 273/2 904 car had 440 360 in plans
    1996 Dodge 1500 ST 5.2 Np3500 4x2 club cab short bed

    2008 Veracruz AWD Limited     I pay she drives

    Offline gichy

    • Jr. Member
    • **
    • Posts: 281
    Re:subframe connectors
    « Reply #9 on: January 20, 2004 - 10:19:27 AM »
    Here are some pictures of my home made frame connectors.

    [attachment deleted by admin]
    Logged
    1974 Barracuda, 340cid, 4 speed OD !!

    Offline gichy

    • Jr. Member
    • **
    • Posts: 281
    Re:subframe connectors
    « Reply #10 on: January 20, 2004 - 10:19:44 AM »
    pic

    [attachment deleted by admin]
    Logged
    1974 Barracuda, 340cid, 4 speed OD !!

    Offline gichy

    • Jr. Member
    • **
    • Posts: 281
    Re:subframe connectors
    « Reply #11 on: January 20, 2004 - 10:26:43 AM »
    The frame connector come through the rear floor about a 1/2", which I think should make the body a little bit stronger? But you can always put a bent in the tubing, to avoid this! Both frame connectors only cost me about $20 bucks canadian and half a day to install. Make sur your car is on sitting on the ground and level.

    [attachment deleted by admin]
    Logged
    1974 Barracuda, 340cid, 4 speed OD !!

    Offline cuda

    • Sr. Member
    • ****
    • Posts: 1373
    • 1970 340 Cuda, pistol grip 4 speed,3:91 sure grip
    Re:subframe connectors
    « Reply #12 on: February 13, 2004 - 04:24:49 PM »
    Took a few pics of my subframe conectors.
    Logged

    Offline cuda

    • Sr. Member
    • ****
    • Posts: 1373
    • 1970 340 Cuda, pistol grip 4 speed,3:91 sure grip
    Re:subframe connectors
    « Reply #13 on: February 13, 2004 - 04:26:23 PM »
    Subframe connectors

    [attachment deleted by admin]
    Logged

    Offline cuda

    • Sr. Member
    • ****
    • Posts: 1373
    • 1970 340 Cuda, pistol grip 4 speed,3:91 sure grip
    Re:subframe connectors
    « Reply #14 on: February 13, 2004 - 04:27:28 PM »
    subframe connectors

    [attachment deleted by admin]
    Logged
    Pages: [1] 2
    « previous next »