Author Topic: Some 74 cuda parts... whats left  (Read 1838 times)

Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Some 74 cuda parts... whats left
« on: October 13, 2006 - 03:01:29 PM »
I have a 74 cuda I parted over the summer and it was very rough!  Anyways parted most of it, but heres some things I can thing of offhand that useable.

1) Package tray
2) Rear window opening inside painted trim
3) Rear roof section arounnd window opening(I plan to use the front opening for my challenger unless I find soemthing else) the roof over all isn;t bad, some rust on the rear ps side that would eb easy easy fix, would trade for a full challenger roof.  A-pillars are going to my challenger.
4) ECU firewall mounting bracket
5) Auto brake pedal, rod (had power discs)
6) Door and quarter glass, all in good shape
7) Rear glass
8) Rear bumper brackets
9) Bumpers (need to check, but believe good cores)
10) PS front bumper bracket
11) sb k-frame has some minro damage cosmetic
12) Two 8-3/4 e-body rear housings and axles, will be using a dana I have in the challenger, complete less brakes, one has a 3.23 open center 489 case, other no center, (one 74, one from a 70)
13) front and rear window regulators
14) sb kickdown linkage, 318/904?
15) upper door and qaurter/glass area trim, ps both, ds door piece is dented/scraped

Thats all I can think of now, roofs been cut off and floors and rails are all shot, crossmember is junk, cowl gone, firewall gone, fender/doors rusty... have the 74 318 and trans.  Located in sw PA and would trade any for/towards a challenger roof, fenders, vinyl top trim, hood trim, etc...


70 challenger project
68 satellite




Offline Confederate Cuda

  • Full Member
  • ***
  • Posts: 727
Re: Some 74 cuda parts... whats left
« Reply #1 on: October 13, 2006 - 06:38:31 PM »
Are the window regulators power?

Offline Morris'_Mopars

  • Sr. Member
  • ****
  • Posts: 1173
Re: Some 74 cuda parts... whats left
« Reply #2 on: October 13, 2006 - 06:58:19 PM »
How much for the package tray??
Morris' Mopars LLC
Raymond, Illinois
Mopar performance at affordable prices.

Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Re: Some 74 cuda parts... whats left
« Reply #3 on: October 13, 2006 - 07:02:12 PM »
Not power on the windows

On the tray, let me check it good, it has aftermarket speakers, just want to make sure its not hacked and make sure theres no rust on the rear. 
70 challenger project
68 satellite

Offline Morris'_Mopars

  • Sr. Member
  • ****
  • Posts: 1173
Re: Some 74 cuda parts... whats left
« Reply #4 on: October 14, 2006 - 09:12:26 PM »
 :2thumbs: Thanks.............. :popcorn:
Morris' Mopars LLC
Raymond, Illinois
Mopar performance at affordable prices.

Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Re: Some 74 cuda parts... whats left
« Reply #5 on: October 14, 2006 - 10:07:20 PM »
It totally slipped my mind, got too caught up working on the satellite, welding/grinding... I'll pull the bottom trim off and pull the speakers and sap a pic tomorrow.  Just so I can get it done before the game.
70 challenger project
68 satellite

Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Re: Some 74 cuda parts... whats left
« Reply #6 on: October 19, 2006 - 10:54:59 PM »
I'd like to get 100 for the package tray... I did list it on ebay for the same price the other day, but yours if you want it.  Pm me and I'll send ya pics.
70 challenger project
68 satellite

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: Some 74 cuda parts... whats left
« Reply #7 on: December 10, 2006 - 09:40:56 AM »
Is the glass tinted?  Any pics? 
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline modtopcuda

  • Jr. Member
  • **
  • Posts: 6
Re: Some 74 cuda parts... whats left
« Reply #8 on: December 30, 2006 - 01:01:24 AM »
Do you have the front retractable seatbelts that go through the rear door panel
Thanks

Offline 72cudaguy

  • Jr. Member
  • **
  • Posts: 62
Re: Some 74 cuda parts... whats left
« Reply #9 on: December 30, 2006 - 06:59:37 AM »
looking for a couple correct screws and nuts for the tail lights on my ' 72 cuda, have any ???   thanks,  Ed '72 cudaguy.

Offline moparnocar

  • Jr. Member
  • **
  • Posts: 285
Re: Some 74 cuda parts... whats left
« Reply #10 on: December 30, 2006 - 07:28:18 AM »
looking for a couple correct screws and nuts for the tail lights on my ' 72 cuda, have any ???   thanks,  Ed '72 cudaguy.

i know I have the nuts.. not sure about screws. email me... mopar_maniac68@yahoo.com