Author Topic: 'CUda is being difficult!!!  (Read 6564 times)

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
'CUda is being difficult!!!
« on: October 15, 2006 - 02:09:52 AM »
I have been trying to get the 'cuda ready for a club picnic tomorrow and have been up the past couple of nights all night trying to get the car to the point where I can drive it. First the exhaust didn't fit right, so I am currently running turn downs off the mufflers. Then I find out I have the wrong water pump pulley. So I find the right one only to find that I have the wrong crank pulley. Its too big.  :banghead: SO leave the wrong crank pulley on and re-install the wrong water pump pulley and hook up a idler pulley for the fan. Then we get everything ready to go (or so I thought) and try and start the car. 2 problems: no fuel, no spark. SO we fight for over and our (by this time it is dark out) and find out that the ignition box isn't getting a good enough ground to the body.  :bricks1: So we hook up a ground, now we have spark, but still no fuel. So we syphon the fuel line to prime the line and reattach the line to the fuel pump. THE STUPID THING WON'T MAINTAIN ITS PRIME!!!  :swear: We tried for an hour. Finally we said screw this first thing in the mornign we will get an electric pump and force the fuel to flow. We know the car fires because we did the redneck trick by pouring a small amount of fuel down the carb (I know bad me). By this time it was midnight and we were all exhausted. Hopefully tomorrow will be better. I have until noon, to get the cuda driving, wash it, replace the brake pads on my Challenger, wash it, and meet up with everyone else, before we head off to the picnic. On a happier note the car looks stunning and I will post some pictures of it tomorrow evening. Thanks for reading me vent.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe




Offline Hemi Challenger

  • Sr. Member
  • ****
  • Posts: 1105
  • Nothing run better then a HEMI
Re: 'CUda is being difficult!!!
« Reply #1 on: October 15, 2006 - 05:29:51 AM »
 First thing that you are doing wrong is that you are rushing it  to fast just for a outing take your time  you don't want to get to this thing and have it break down on you do you  so just take your time and thing will go just right   Good luck  :2thumbs:

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: 'CUda is being difficult!!!
« Reply #2 on: October 15, 2006 - 08:22:53 AM »
Is it a new pump and are the vent lines clear in the tank?


Tom :2thumbs:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: 'CUda is being difficult!!!
« Reply #3 on: October 15, 2006 - 08:29:06 AM »
WOW sorry to hear about some setbacks!  Just tackle one thing at a time and if it gets done, so be it!  The best thing to do is not get aggravated and just keep that positive attitude.  I'm sure it will turn out just fine!   :2thumbs:



Can't wait to see them pics!!   :bananasmi  :bananasmi  :bananasmi

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: 'CUda is being difficult!!!
« Reply #4 on: October 15, 2006 - 09:02:44 AM »
Is it a new pump and are the vent lines clear in the tank?


Tom :2thumbs:


    :iagree:

It could be that the gas isn't getting to the pump(clogged sock on the pick-up tube), or you could have a clogged fuel filter. I've never had to prime a mechanical fuel pump before, even when there was no fuel is the line at all.


  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: 'CUda is being difficult!!!
« Reply #5 on: October 15, 2006 - 12:44:01 PM »
Everything is clear and new. I replaced the pump with an electric one and eureka problem solved car runs and things are looking better today. Well sort of, we went to fix the brakes on the Challenger and found out that the steel belts are showing through on the front tires. So its not going to the picnic, but as of right now the 'cuda is. I post pics tonight when I get back.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: 'CUda is being difficult!!!
« Reply #6 on: October 15, 2006 - 12:58:09 PM »
Good news for the cuda.  Sounds like some new tread is in store for the Challenger!   :dogpile:

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: 'CUda is being difficult!!!
« Reply #7 on: October 15, 2006 - 08:15:53 PM »
Had a good time today here are some pics.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: 'CUda is being difficult!!!
« Reply #8 on: October 15, 2006 - 08:18:33 PM »
Cuda needs some fine tuning, but overall today was a success.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline 71340RT

  • Resident
  • *****
  • Posts: 3502
Re: 'CUda is being difficult!!!
« Reply #9 on: October 15, 2006 - 09:49:57 PM »
Glad you got the fuel problem figured out. I hate tracking down problems like no spark or no fuel. Sometimes it is easy and sometimes it takes forever to find the problem.


70 Plymouth Cuda 340 4-speed
71 Dodge Challenger RT 340 automatic
1973 Dodge Challenger 360 automatic EFI
2002 Harley Davidson Dyna Wide Glide
2003 Dodge Stratus RT coupe
2009 Challenger RT Classic B5 Blue
2014 Ram Express 5.7 Hemi 4X4

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: 'CUda is being difficult!!!
« Reply #10 on: October 15, 2006 - 09:52:55 PM »
 :woo: Glad everything worked out for you!

 :wow: I love your driveway/garage set up!  Very nice!  :thumbsup:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Total BS

  • Full Member
  • ***
  • Posts: 742
  • '71 Carrabuda Baby!
Re: 'CUda is being difficult!!!
« Reply #11 on: October 15, 2006 - 10:10:35 PM »
My kind of landscaping too....all Mopars. :2thumbs:
1971 'Cuda 383
1970 Chevelle SS LS6
1999 Durango
-New Joisey-

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: 'CUda is being difficult!!!
« Reply #12 on: October 15, 2006 - 10:29:33 PM »
My kind of landscaping too....all Mopars. :2thumbs:

:iagree:
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline 72hemi

  • Resident
  • *****
  • Posts: 4812
  • MEMBER SINCE JANUARY 2006
Re: 'CUda is being difficult!!!
« Reply #13 on: October 16, 2006 - 09:28:23 AM »
I should have the bugs worked out and the car finished in hopefully 2 weeks. I want to get the car finished before I leave for SEMA. The car will then be going up for sale, and probably put up on ebay. If any one is interested let me know. Any questions ask, I am more than willing to answer them. I know the first question will be how much, asking 50k, make me an offer you won't hurt my feelings.
1972 Dodge Challenger 340 6 Pack 4-speed
1996 Dodge Viper GTS Coupe

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: 'CUda is being difficult!!!
« Reply #14 on: October 16, 2006 - 10:18:06 AM »
I should have the bugs worked out and the car finished in hopefully 2 weeks. I want to get the car finished before I leave for SEMA. The car will then be going up for sale, and probably put up on ebay. If any one is interested let me know. Any questions ask, I am more than willing to answer them. I know the first question will be how much, asking 50k, make me an offer you won't hurt my feelings.

I'll start the bidding with   :2cents:


  Mike    :poopoke:

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.