News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 ... 49 50 [51] 52 53 ... 62

    Author Topic: Work has begun...Topcat  (Read 261926 times)

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Re: Work has begun...Topcat
    « Reply #750 on: December 07, 2013 - 08:35:59 PM »
    Ouch, but glad no human injuries!

    Any photos of the "setup" for lowering the car over the engine??  I might try that instead of lowering the engine into the car.
    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car


    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Work has begun...Topcat
    « Reply #751 on: December 07, 2013 - 10:07:56 PM »
    Quote from: johns cuda shop on December 07, 2013 - 07:41:50 PM
    Oh No...   :bricks1:    hopefully nobody got hurt....   :faint:


    Yes of course I'm glad no one was hurt.   :worshippy
    Once we get it in; I'll put more pictures on the extension and cherry picker set up.
    Logged
    Mike, Fremont, CA.

    Offline E-Body Products

    • E-Body Products
    • Sr. Member
    • ****
    • Posts: 1016
    • American Jobs Are Our Children's Future!
      • E-BODY PRODUCTS
    Re: Work has begun...Topcat
    « Reply #752 on: December 15, 2013 - 10:37:28 AM »
    Good luck with the second go around. Good to see your hard work coming together. I just finished building a house. I've been so busy with that lately, not much time to catch up on here.


    Sent from my iPhone using Tapatalk
    Logged

    Offline Duff

    • Jr. Member
    • **
    • Posts: 288
    Re: Work has begun...Topcat
    « Reply #753 on: December 20, 2013 - 06:43:08 PM »
    Holy moly!  Terrible news.  Glad the damage isn't too bad.  I would hate to see this project delayed!!!
    Logged

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Work has begun...Topcat
    « Reply #754 on: December 20, 2013 - 08:33:11 PM »
    Quote from: Duff on December 20, 2013 - 06:43:08 PM
    Holy moly!  Terrible news.  Glad the damage isn't too bad.  I would hate to see this project delayed!!!

    After Christmas, I should have the engine in. So it'll be early next year I fire it up.
    I have everything except the seats.
    Logged
    Mike, Fremont, CA.

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Work has begun...Topcat
    « Reply #755 on: December 21, 2013 - 08:40:36 PM »
    O.K. Damage from mishap is now done.

    I should have the engine in before next end of week.

    « Last Edit: November 16, 2014 - 12:27:38 PM by Topcat »
    Logged
    Mike, Fremont, CA.

    Offline 67vertman

    • Sr. Resident
    • ******
    • Posts: 5125
    • Member since 9-23-2005
    Re: Work has begun...Topcat
    « Reply #756 on: December 22, 2013 - 01:11:04 PM »
    Good to see Mike!  :2thumbs:

    I know your heart took a hit with damage, but it looks good as new.


    I can't wait until you drop in the motor.   :crazy:
    Logged



    Ron - Born and raised in Southern California

    I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

    First car -1969 Road Runner 383 4sp

    Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

    Offline 422STROKER

    • Sr. Resident
    • ******
    • Posts: 5386
    • Member Since 6/3/06
    Re: Work has begun...Topcat
    « Reply #757 on: December 22, 2013 - 02:02:39 PM »
    Coming along nicely!  Gives me hope there will be a finish to mine!

    Tom


    Sent from my iPad using Tapatalk
    Logged
    Tom
    12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Re: Work has begun...Topcat
    « Reply #758 on: December 22, 2013 - 06:52:02 PM »
    Cool!  Please be sure to get photos of the engine install setup  :)  :thumbsup:
    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Work has begun...Topcat
    « Reply #759 on: December 27, 2013 - 10:02:50 PM »
    Today was the big day. Halleuyah!!  :cheers:

    Bob, Owen, and Ryan helped me out today.  :2thumbs:

    We also installed the Torsion bars.
    Back at it tomorrow. 


    « Last Edit: November 16, 2014 - 12:22:16 PM by Topcat »
    Logged
    Mike, Fremont, CA.

    Offline Cuda Cody

    • Resident
    • *****
    • Posts: 3988
    • Vancouver, WA
    Re: Work has begun...Topcat
    « Reply #760 on: December 27, 2013 - 10:07:36 PM »
    Nice job shoehorning that beast in there.  It always easier the second time, uh?   :poopoke:    :woohoo:
    Logged
    The funniest thing about this particular signature is that by the time you realize it doesn't say anything it's to late to stop reading it.

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Re: Work has begun...Topcat
    « Reply #761 on: December 28, 2013 - 12:37:29 AM »
    Nice, like that hoist bracket  :thumbsup: , is there a "dolly" attachment too?
    How did you lift the engine up, or did you set the car down on it then use the hoist to pull it up?

     :working:

    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Work has begun...Topcat
    « Reply #762 on: December 28, 2013 - 12:49:18 AM »
    Quote from: mrbill426 on December 28, 2013 - 12:37:29 AM
    Nice, like that hoist bracket  :thumbsup: , is there a "dolly" attachment too?
    How did you lift the engine up, or did you set the car down on it then use the hoist to pull it up?

     :working:

    Just a Cherry picker with a chain. Having it the distance away allows you to sway the front end left or right a little in case clearance becomes an issue. There was never a need to lift the engine up to the frame.

    The K frame was resting on 2 sections of 4 x 4 wood sections nailed onto the moving dolly.
    The moving dolly of wood I bought at Harbor Freight.

    I used alot of wheels under the dolly just like a 747/C5A jetliner does to disperse the weight. 
    A Hemi weighs more so it was likely needed to make moving easier.
    Logged
    Mike, Fremont, CA.

    Offline mrbill426

    • Full Member
    • ***
    • Posts: 775
      • All Around Mopars
    Re: Work has begun...Topcat
    « Reply #763 on: December 28, 2013 - 01:09:12 AM »
    I like it!  :)


    Quote from: Topcat on December 28, 2013 - 12:49:18 AM
    Just a Cherry picker with a chain. Having it the distance away allows you to sway the front end left or right a little in case clearance becomes an issue. There was never a need to lift the engine up to the frame.

    The K frame was resting on 2 sections of 4 x 4 wood sections nailed onto the moving dolly.
    The moving dolly of wood I bought at Harbor Freight.

    I used alot of wheels under the dolly just like a 747/C5A jetliner does to disperse the weight. 
    A Hemi weighs more so it was likely needed to make moving easier.
    Logged
    MOPAR or NO car!

    '72 'Cuda 340, white on white
    '72 Sebring; bracket project
    '64 Imperial Crown black on black
    '66 Imperial Crown; parts car

    Offline Topcat

    • C-C.com Expert
    • ********
    • Posts: 15376
    • Member since 9/16/04
    Re: Work has begun...Topcat
    « Reply #764 on: December 28, 2013 - 01:22:12 AM »
    Remeber to notch the plates that bolt onto the frame so the K member will clear when it comes time to bolting it up.

    I barely caught that. Lucky I did.
    Logged
    Mike, Fremont, CA.

    Pages: 1 ... 49 50 [51] 52 53 ... 62
    « previous next »