Author Topic: 70 71 Challenger Fender Differences?  (Read 2565 times)

Offline RusTy/SE

  • Sr. Resident
  • ******
  • Posts: 5456
  • Just havin' fun
70 71 Challenger Fender Differences?
« on: October 29, 2006 - 06:39:48 PM »
Could someone post pics of the differences between 70 and 71 Challenger fenders. I remember but haven't found the thread where it's mentioned that it would be in the headlight bucket area? Thanks in advance :cheers:

Russ
« Last Edit: October 29, 2006 - 06:49:24 PM by RusTy/SE »
Russ
2001 Durango     1B4HS
1970 Challenger  JS29U
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=27173.0
Member since December 13, 2002




Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: 70 71 Challenger Fender Differences?
« Reply #1 on: October 29, 2006 - 07:56:40 PM »
I think this is what you are looking for,the 70 doesn't have this notch.

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 70 71 Challenger Fender Differences?
« Reply #2 on: October 30, 2006 - 12:41:31 AM »
the inner headlights do not seem to be as recessed as well on the 71

Challenger - You`ll wish You Hadn`t

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: 70 71 Challenger Fender Differences?
« Reply #3 on: October 30, 2006 - 12:46:48 AM »
I think this is what you are looking for,the 70 doesn't have this notch.

Why was there a change? What is the notch for?
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline RusTy/SE

  • Sr. Resident
  • ******
  • Posts: 5456
  • Just havin' fun
Re: 70 71 Challenger Fender Differences?
« Reply #4 on: October 30, 2006 - 05:37:37 AM »
Thanks farmboy70!! That's perfect :cheers:

Chryco I do know the headlight bezels are not as deep on a 70 as on a 71. Makes sense that the headlight buckets as well as the headlights themselves would not be as recessed as far :thinkerg:

Thank you both :)
« Last Edit: October 30, 2006 - 05:42:11 AM by RusTy/SE »
Russ
2001 Durango     1B4HS
1970 Challenger  JS29U
Restoration thread: http://www.cuda-challenger.com/cc/index.php?topic=27173.0
Member since December 13, 2002

Offline Challenger6pak

  • Resident
  • *****
  • Posts: 4084
Re: 70 71 Challenger Fender Differences?
« Reply #5 on: October 30, 2006 - 02:40:27 PM »
I measured out the 70 & 71 headlight bucket on fenders here. They measure out the same distance from the front edge of the fender.  I believe the notch is the only main difference.
1969 Sport Satellite H code convertible, 1970 Cuda 440+6, 1970 Challenger R/T 440+6, 1970 Challenger 383 R/T auto, 1970 Challenger R/T 383 4 speed,1971 Challenger convertible.

Offline Got JOB

  • Full Member
  • ***
  • Posts: 661
  • Member since 2-14-06
Re: 70 71 Challenger Fender Differences?
« Reply #6 on: October 31, 2006 - 03:11:35 PM »
jacksboys, the notch was retooling for the '72 - '74 grill assembly attachment
70 T/A Plum crazy
71 vert. viper red
74 Rallye triple black ( sold )
76 Aspen Wagon
West Georgia

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: 70 71 Challenger Fender Differences?
« Reply #7 on: October 31, 2006 - 03:47:38 PM »
I have noticed that the inner headlight sits 1/4" forward using a 71 fender with a 70 grille   

Challenger - You`ll wish You Hadn`t

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: 70 71 Challenger Fender Differences?
« Reply #8 on: October 31, 2006 - 08:37:04 PM »
jacksboys, the notch was retooling for the '72 - '74 grill assembly attachment

Thanks, but why was it on a '71?  :clueless:
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline 70 rtse

  • Jr. Member
  • **
  • Posts: 270
Re: 70 71 Challenger Fender Differences?
« Reply #9 on: October 31, 2006 - 10:03:11 PM »
You should be able to weld a piece to make it look the same the only thing is that would the head light bucket fit right?