newbie from michigan

Author Topic: newbie from michigan  (Read 3090 times)

Offline bluecuda360

  • Jr. Member
  • **
  • Posts: 49
newbie from michigan
« on: November 04, 2006 - 07:57:54 PM »
Just stumbled on this site and it looks great.I have a 74' Cuda 360 4 spd. that has been in pieces since 1978.It is a 36000 mile car that is rock solid.I picked it up in 89' .I hope to get it back together soon.I have everything except the #s matching trans.Have the buildsheet,fender tags,and title from 1977.Its B5.black int.,no vinyl top.rallye dash(perfect),no console.It also came with NOS fenders .Oh yeah I am missing the original intake and thermoquad also.Any help locating these would be great.I was going to modify it slightly,but have since changed my mind and decided to go with a stock resto.I am trying to find some pics to post also.Again great website, Thanks Dwight :wavingflag:




Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: newbie from michigan
« Reply #1 on: November 04, 2006 - 09:13:35 PM »
Glad you found us Dwight!!  Sounds like a sweet car!!  Definitely gonna need some pics!!   Where in Mi are you located??  Hope you enjoy the site!! 

 :wave:
 :wave:
 :wave:

Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: newbie from michigan
« Reply #2 on: November 04, 2006 - 09:15:24 PM »
Welcome to the site, Dwight!!! :wave:  It sounds like you have a very cool 'Cuda project underway. :thumbsup: :cheers:  As for finding the intake and the TQ, your best bet would probably be eBay. :thumbsup:
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline Madmax440

  • Sr. Member
  • ****
  • Posts: 1471
Re: newbie from michigan
« Reply #3 on: November 04, 2006 - 11:09:11 PM »
Welcome to the site. In reference to finding any parts Mekrunner has posted an excellent list under the parts wanted section.

Offline cudaboyandgirl

  • Jr. Member
  • **
  • Posts: 118
Re: newbie from michigan
« Reply #4 on: November 05, 2006 - 02:23:33 AM »
Welcome to the site, sounds like you have a great project on your hands!!
1973 Barracuda
1972 Charger
2000 Jeep Grand Cherokee Laredo
1974 Triumph Stag Convertible

Offline ESGEE

  • Sr. Member
  • ****
  • Posts: 1448
  • 1970 Challenger RT/SE
    • SG´s site
Re: newbie from michigan
« Reply #5 on: November 05, 2006 - 02:36:40 AM »
Welcome! And lets see some pics of that car :cheers:
70 Challenger RT/SE(Looking for 383 Magnum N0B196875)
70 Challenger RT/SE(Looking for 383 Magnum N0B115166)
70 Challenger SE(RT/SE clone)
69 Charger RT/SE 4speed Trackpac
70 Charger 500

Offline ROMI

  • Full Member
  • ***
  • Posts: 759
  • 71 Challenger R/T 340 4 speed, Lapeer Michigan
Re: newbie from michigan
« Reply #6 on: November 05, 2006 - 05:11:32 AM »
Welcome to "E" land Dwight........
Like 4C said, where in MI are you?

Offline bluecuda360

  • Jr. Member
  • **
  • Posts: 49
Re: newbie from michigan
« Reply #7 on: November 05, 2006 - 08:16:49 AM »
Thanks for the nice welcome,I'm in Whitelake,Mi.,just west of Pontiac.My car is in Commerce,just a few miles away at a friends house.It,s just sitting inside an enclosed car trailer waiting for me to make the decision whether to attempt the paint work myself or pay somebody to do it.It is completely stripped down to a shell sitting on casters.The car was litterally only on the road for a few years before it was stripped down for a complete resto.The guy I got the car from bought it from the original female owner when it was 1 year old.He did what a lot of other people did then was to yank out the small block a drop in a 440,jack up the rear end,put big tires on it,custom paint,and cruise Telegraph Rd.Fortunetly he held on to the 360 engine,but the trans got lost somewhere through the years.After just about 8000 miles of 440 4spd.,456 rear end abuse he decided to start a resto back to original.Just out of high school he evidently bought or opened a bodyshop.During this time(late 1970s)he had completely chem- stripped the car(good or bad?)then lightly under coated the whole car inside and underneath.I think this saved the car.The only part that looks like it might have been fixed is in front of the rear wheelwells,looks like very small metal patches welded in.I dont know what happened to the front fenders,but he bought brand new ones from Chrysler dealership in late seventies,which still are in the black paint they came in and have never been mounted on the car,other then me temperarily putting them on for storage purposes.Sorry for rambling on, I know I need to get some pics to make all this,seam worthwile reading,so I'll stop here till I post some.Thanks everybody.Dwight

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: newbie from michigan
« Reply #8 on: November 05, 2006 - 08:52:40 AM »
Sounds like you have a cool car in the works there Dwight!  You need to get it done before July 2007 so you can drive out to Chryslers at Carlisle with some of us!  We have a great time there!  Maybe one day when I'm going over to CJ's at Haggerty and Richardson, I could stop in and check out the progress!     :2thumbs:

Offline Rev-It-Up

  • Global Moderator
  • Permanent Resident
  • *****
  • Posts: 10601
  • Member Since 2/20/02
Re: newbie from michigan
« Reply #9 on: November 05, 2006 - 01:30:54 PM »
Welcome to the forum!! Sounds like you have a really cool project to work on.  We definatley are gonna need some pics though...you're just not a real member until you let us see what you're working on!  :roflsmiley:
Rev-It-Up                                                             Yes, I'm a girl!
                         


Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: newbie from michigan
« Reply #10 on: November 05, 2006 - 06:25:51 PM »
you're just not a real member until you let us see what you're working on!     I think that was a just statement that Rev made.    A pic is worth ...........well you know.........
Dave or David

daves70

  • Guest
Re: newbie from michigan
« Reply #11 on: November 05, 2006 - 06:33:24 PM »
you're just not a real member until you let us see what you're working on!     I think that was a just statement that Rev made.    A pic is worth ...........well you know.........
:iagree:

Offline bluecuda360

  • Jr. Member
  • **
  • Posts: 49
CJ's
« Reply #12 on: November 05, 2006 - 06:45:30 PM »
Sounds like you have a cool car in the works there Dwight!  You need to get it done before July 2007 so you can drive out to Chryslers at Carlisle with some of us!  We have a great time there!  Maybe one day when I'm going over to CJ's at Haggerty and Richardson, I could stop in and check out the progress!     :2thumbs:
4Cruizn,My car is probably about a mile or so from CJ's off Oakley Park.If you know you are gonna be in the area let me know,I need some opinions on a few things. Dwight

Offline 71340RT

  • Resident
  • *****
  • Posts: 3502
Re: newbie from michigan
« Reply #13 on: November 05, 2006 - 09:22:39 PM »
Welcome to the site and your Cuda sounds like a great project. Post some pictures when you get a chance and keep us all posted on your progrees.


70 Plymouth Cuda 340 4-speed
71 Dodge Challenger RT 340 automatic
1973 Dodge Challenger 360 automatic EFI
2002 Harley Davidson Dyna Wide Glide
2003 Dodge Stratus RT coupe
2009 Challenger RT Classic B5 Blue
2014 Ram Express 5.7 Hemi 4X4

cudahob

  • Guest
Re: newbie from michigan
« Reply #14 on: November 08, 2006 - 06:39:02 AM »
  :wave: