Author Topic: Making A 70 A 70  (Read 9411 times)

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Making A 70 A 70
« Reply #30 on: November 16, 2006 - 08:01:06 PM »
Don't laugh. My Buddy who really knows his Mopar stuff says he knew of a Challenger that got front 71 fenders and side lamps but the rear had 72 markers when car was new.   :dunno:

Ma Mopar did some funny stuff back then.  That would be a rare apple!  :grinyes:

That's probably more believable than the scenario I presented.  Usually the following year will get left over previous year stuff.  Like my '72 has a '71 dash in it from the factory since it was made on 8/17/71.
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger




Offline jrwoodjoe

  • Jr. Member
  • **
  • Posts: 136
Re: Making A 70 A 70
« Reply #31 on: November 17, 2006 - 07:01:26 AM »
Ma Mopar did some funny stuff back then.  That would be a rare apple!  :grinyes:

That's probably more believable than the scenario I presented.  Usually the following year will get left over previous year stuff.  Like my '72 has a '71 dash in it from the factory since it was made on 8/17/71.

 :iagree: Same guy mentioned above has a brother with a nice 72 RR. He bought car in 73 from Original Owner. Car has never been in an accident or damaged but car has a 71 Grille.

Joe


65 Barracuda
70 Challenger

Offline rowdync

  • Jr. Member
  • **
  • Posts: 18
  • Challenger Mut
Re: Making A 70 A 70
« Reply #32 on: November 17, 2006 - 04:14:08 PM »
Hey Everybody,
 I figured out the VIN, but the cowl tag is a bit difficult. Here's both.
VIN: JH29N0B118871 / I got Challenger, High Price Class, Fastback, 383 4bbl High Perf, 1970, Hamtrack assembly plant out of that.
Cowl Tag: R11 V7X Y05 26 EN2
              G34 H51 L31 M21 M31 N41
              V1X A01 C16 C26 C55 G32
              FJ5 H5X9 000 909 012208

The bottom set I think the FJ5 is Sub Lime and the 909 is Sept 9th and the 012208 is the Veh Order No.
The rest I haven't found. Can anyone figure the rest out?

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Making A 70 A 70
« Reply #33 on: November 17, 2006 - 04:45:41 PM »
I will give it a try...

R11 AM Radio (2 Watts)
V7X Accent Stripes Black
Y05 Built to US Specs
EN2 End Line two
G34 OS LH Remote Racing Mirror
H51 Air Conditioning
L31 Hood/Fender Mounted Turn Signals
M21 Roof drip rail moldings
M31 Belt and Hood Moldings ??
N41 Dual Exhaust
V1X Full Vinyl Top Black
A01 Light Package
C16 Console w/Woodgrain Panel
C26 Consolette w/Formed Headlining
C55 Bucket Seats
G32 OS RH Manual Racing Mirror
H5X9 H-highline, 5-bucket, X9-black (these are the half cloth half vinyl seats very nice seats I got them in my car it looks like salt and pepper and Legendary Auto makes reproduction covers with NOS Salt n Pepper material)

I beleive the 26 is the radiator size and 000 is the upper door paint color which is nonexistant on E bodys.
« Last Edit: November 17, 2006 - 04:48:49 PM by lunchbox »

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Making A 70 A 70
« Reply #34 on: November 17, 2006 - 04:47:21 PM »
Looks like from your VIN number you have a 1970 SE Challenger. Cool  :ylsuper:
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline rowdync

  • Jr. Member
  • **
  • Posts: 18
  • Challenger Mut
Re: Making A 70 A 70
« Reply #35 on: November 17, 2006 - 06:42:07 PM »
Thanks so much for figuring out the cowl tag. Sounds like the car was loaded with some cool stuff coming out of the factory. More incentive to get r' done!

Offline rowdync

  • Jr. Member
  • **
  • Posts: 18
  • Challenger Mut
Re: Making A 70 A 70
« Reply #36 on: November 18, 2006 - 06:43:06 PM »
 :bananasmi
I've aquired 70 tail lights. Hoping for the grille tomorrow.

Offline Plum6Pak

  • Resident
  • *****
  • Posts: 3572
  • Plum6Pak
Re: Making A 70 A 70
« Reply #37 on: November 18, 2006 - 07:18:28 PM »
Hey Rowdync, does your fender tag have the vin on it as well? Usually the fender tag will have the same numbers as your vin. Also, just in case someone has been doing a switch aroo on you before you bought it, there are other places on the car to check the vin number against the tags. Just some suggestions, hope you get it all worked out. Also, thank you for your service to all of us.  :2thumbs:

Offline rowdync

  • Jr. Member
  • **
  • Posts: 18
  • Challenger Mut
Re: Making A 70 A 70
« Reply #38 on: November 18, 2006 - 07:59:57 PM »
Thanks Plum6PAK. I appreciate it. Also, the Vin on the dash matches the cowl tag. I think the guy who put the car together took the cowl tag off the original fender. I didn't know there were other places to check the Vin on the car though. Also the guy a got the 70 tail lights from still says his uncle has a 70 Chally and that I could bring my camera up and take some reference pictures to go by. I thought that was cool.
Rowdync

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Making A 70 A 70
« Reply #39 on: November 18, 2006 - 09:28:41 PM »
Let me know if you want to sell your 71 taillights and light housing  :bigsmile:
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Making A 70 A 70
« Reply #40 on: November 19, 2006 - 03:01:58 AM »
If you wanted to confirm that the unibody structure matches your dash V.I.N. and fender tag, check for the last 6 digits of your V.I.N. on the top of the cowl area.  There is also these same 6 numbers on the upper portion of the radiator support frame. (I believe it was just the six numerical digits, but may be the last 8 digits of your V.I.N. as I haven't been around my car too much in the past two years.  The two extra digits would be the model year "0" followed by the plant "B".  These would be found on the transmission case as well as the engine stamping boss had nothing been switched out of it.) :2thumbs:
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: Making A 70 A 70
« Reply #41 on: November 21, 2006 - 01:09:26 PM »
You could say that it's a late model '70 that got '71 parts?  Yes?  No?    :D

Probably no....  :walkaway:

Definitely no after seeing fender tag info - car was built in Sept of 69
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT

Offline rowdync

  • Jr. Member
  • **
  • Posts: 18
  • Challenger Mut
Re: Making A 70 A 70
« Reply #42 on: November 21, 2006 - 03:46:07 PM »
 :bananasmi I got a 70 grille. Now for the bezzels.

Offline Plum6Pak

  • Resident
  • *****
  • Posts: 3572
  • Plum6Pak
Re: Making A 70 A 70
« Reply #43 on: November 21, 2006 - 03:49:11 PM »
It'll look like it should in no time!  :clapping:

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: Making A 70 A 70
« Reply #44 on: November 22, 2006 - 03:53:55 PM »
Thanks so much for figuring out the cowl tag. Sounds like the car was loaded with some cool stuff coming out of the factory. More incentive to get r' done!


Heres a pic of your seat code...


I am a 3P071 and a 3P051C  dang cops :stomp: