How to clean.

Author Topic: How to clean.  (Read 1159 times)

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
How to clean.
« on: January 17, 2007 - 09:02:57 AM »
My woodgrain is in very good condition but needs a good cleaning. What is best to use without doing any damage to the photo of the woodgrain?
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD




Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: How to clean.
« Reply #1 on: January 17, 2007 - 01:33:35 PM »
Warm water with mild dish soap. Thats how I did almost all my dash pieces.   :thumbsup:

Lunch

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: How to clean.
« Reply #2 on: January 17, 2007 - 04:33:47 PM »
It has been ages, but I think I tried Windex. UGH!!  :stomp: It really messed up the aluminum edges around the gauges. Needless to say, I was worse off afterwards.  :pullinghair:


  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: How to clean.
« Reply #3 on: January 17, 2007 - 04:53:24 PM »
It has been ages, but I think I tried Windex. UGH!!  :stomp: It really messed up the aluminum edges around the gauges. Needless to say, I was worse off afterwards.  :pullinghair:


  Mike

Mike

Thanks for the warning I would have thought windex would work glad I didn't try it. I'll try the warm water and mild detergent.
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: How to clean.
« Reply #4 on: January 17, 2007 - 05:47:17 PM »
My stuff was in pretty good shape but had a dull buildup that just smeared with cleaners, I used Novus Plastic # 2 Polish, sparingly on the woodgrain but aggressively on the lens, console, plastic dash trim & pad.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline 67vertman

  • Sr. Resident
  • ******
  • Posts: 5125
  • Member since 9-23-2005
Re: How to clean.
« Reply #5 on: January 17, 2007 - 07:41:11 PM »
Always start with the mildest detergents first and work your way up from there, as you move up in cleaner strength try it on an small area first to see if it smudges or removes the color. 
I usually have the best luck with Simple Green, and warm water, it cuts the grease and doesn’t leave any residue. 



Ron - Born and raised in Southern California

I got the 1970 Cuda, but still need the hot blonde to ride shotgun!

First car -1969 Road Runner 383 4sp

Current ride - 1970 Barracuda 440-6 4 sp Dana 60  (4:10)

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: How to clean.
« Reply #6 on: January 17, 2007 - 08:04:11 PM »
Are we talking mild detergents like an Ivory dish soap?
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline Lunchbox

  • Sr. Member
  • ****
  • Posts: 1948
Re: How to clean.
« Reply #7 on: January 17, 2007 - 10:05:10 PM »
Are we talking mild detergents like an Ivory dish soap?

Thats what I used  :2thumbs: Got the crud of my wood grain with out damaging it. Unfortanatly it had scratches on it from rats that I thought I could fix after I cleaned it, but then decided to just get a new one.

Offline Stacked440

  • Sr. Member
  • ****
  • Posts: 1026
Re: How to clean.
« Reply #8 on: January 25, 2007 - 11:16:11 PM »
I just use dish soap with warm water on just about every little piece of trim or...well really anything that will fit in my kitchen sink :rofl: works great on interior stuff :thumbsup:
-Kyle-
1971 Challenger R/T clone 440/5-spd
1973 Duster - 5.7L Hemi swap project