Author Topic: Good news, Bad news!  (Read 1717 times)

Offline ReturnofCuda

  • Jr. Member
  • **
  • Posts: 262
Good news, Bad news!
« on: January 27, 2007 - 09:05:55 AM »
The good news, I just received the parts to finish the body of my Cuda'.
Doug
1973 Cuda 340, TF727, 8 3/4 3.55 posi




Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Good news, Bad news!
« Reply #1 on: January 27, 2007 - 09:06:42 AM »
What's the bad news? :roflsmiley:

Tom :popcorn:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Good news, Bad news!
« Reply #2 on: January 27, 2007 - 09:07:30 AM »
Parts look great!   Hope there is no bad news!   :nono:

Offline pink panther

  • Resident
  • *****
  • Posts: 2547
Re: Good news, Bad news!
« Reply #3 on: January 27, 2007 - 09:10:02 AM »
 :popcorn:
Scott   -  Member since 9/18/2005

Offline ReturnofCuda

  • Jr. Member
  • **
  • Posts: 262
Re: Good news, Bad news!
« Reply #4 on: January 27, 2007 - 09:10:50 AM »
The bad news, I have some damage. If some one has dealt with Sherman Parts and UPS frieght in a situation like this, please advise me on the best route to take. All the damage is minor and easily fixed, but they are still supposed to be new parts. I circled the damage in the photo's. Please advise! :popcorn:
Doug
1973 Cuda 340, TF727, 8 3/4 3.55 posi

Offline 71GTX

  • Sr. Member
  • ****
  • Posts: 1144
  • It's a fine line between a hobby & mental illness!
Re: Good news, Bad news!
« Reply #5 on: January 27, 2007 - 10:03:02 AM »
Contact Shermans....Let me know how things fit from them. We ordered some parts and they required some modification for fitment....
69 RoadRunner (clone)
70 Cuda 383 4 speed (project) one of the first few off the line at Hamtramck with a 1017XX VIN
70 Cuda convertible 340 4 speed (project)
70 Barracuda (project)
71 GTX 440 4 speed (project)
72 Cuda 340 3 speed (project)
3 Harleys
95 Dodge Ram 2500 Diesel 4x4

Expensive Pee is the end result of Expensive Beer!

Offline Chryco Psycho

  • Administrator
  • C-C.com Guru
  • *****
  • Posts: 36620
  • 70 Challenger R/T SE 70 tube Chassis Cuda now sold
Re: Good news, Bad news!
« Reply #6 on: January 27, 2007 - 10:03:46 AM »
So you are supposed to get the delivery guy to stand there for 1/2 hr or so while you open every box & thoroughly check every part , nice way to get out of warranty  :banghead:

Challenger - You`ll wish You Hadn`t

Offline pink panther

  • Resident
  • *****
  • Posts: 2547
Re: Good news, Bad news!
« Reply #7 on: January 27, 2007 - 10:08:02 AM »
So you are supposed to get the delivery guy to stand there for 1/2 hr or so while you open every box & thoroughly check every part , nice way to get out of warranty  :banghead:

I can tell you through my Job that UPS will not allow you to open your packages and inspect them prior to signature.

Then when you find something wrong and file a claim it is always insufficient packing material so they are not liable.

Good luck
Scott   -  Member since 9/18/2005

Offline ReturnofCuda

  • Jr. Member
  • **
  • Posts: 262
Re: Good news, Bad news!
« Reply #8 on: January 27, 2007 - 10:10:48 AM »
Contact Shermans....Let me know how things fit from them. We ordered some parts and they required some modification for fitment....
I'm sure they will reqire some tweaking to make them fit. The only pieces that don't require some fitting cost a whole lot of money. I will keep everyone post of how it's going. I'm sure I'll run in to trouble and need some advise! :worshippy
Doug
1973 Cuda 340, TF727, 8 3/4 3.55 posi

Offline ReturnofCuda

  • Jr. Member
  • **
  • Posts: 262
Re: Good news, Bad news!
« Reply #9 on: January 27, 2007 - 10:20:42 AM »
So you are supposed to get the delivery guy to stand there for 1/2 hr or so while you open every box & thoroughly check every part , nice way to get out of warranty  :banghead:
I actually went to the shipping depot yesterday and picked them up to cut down on the handling of them. When I got there it was dark and I didn't see thier lovely little note till today when I opened the box to inspect the parts. The damage that is there, and the way the box looked, looks as it was done prior to shipping, not during. The part of the box that was damaged is where the outer wheel houses were located. There was no other damage to the box!?
Doug
1973 Cuda 340, TF727, 8 3/4 3.55 posi

Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Good news, Bad news!
« Reply #10 on: January 27, 2007 - 11:16:54 AM »
Hmm, usually Sherman Parts & Associates is a well-reputable company.  I've always just ordered my sheetmetal through a local supplier (Browns of Two Rivers) and I've never had that problem with damages during shipment.  Hopefully you contacted Sherman the same day you inspected the items (and received them) and they'll work something out with you.
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline ReturnofCuda

  • Jr. Member
  • **
  • Posts: 262
Re: Good news, Bad news!
« Reply #11 on: January 27, 2007 - 01:01:05 PM »
Hmm, usually Sherman Parts & Associates is a well-reputable company.  I've always just ordered my sheetmetal through a local supplier (Browns of Two Rivers) and I've never had that problem with damages during shipment.  Hopefully you contacted Sherman the same day you inspected the items (and received them) and they'll work something out with you.
They're not open till Monday, neither is UPS Frieght. So, I'll have to wait.
Doug
1973 Cuda 340, TF727, 8 3/4 3.55 posi

71challengher

  • Guest
Re: Good news, Bad news!
« Reply #12 on: January 27, 2007 - 09:02:02 PM »
 :wave:Doug, Good luck. I hope you get everything straightened out. Tell Steph I said  :wave:.Hope to see you both in Shrewsbury. :2thumbs:

Offline ReturnofCuda

  • Jr. Member
  • **
  • Posts: 262
Re: Good news, Bad news!
« Reply #13 on: January 27, 2007 - 10:08:01 PM »
:wave:Doug, Good luck. I hope you get everything straightened out. Tell Steph I said  :wave:.Hope to see you both in Shrewsbury. :2thumbs:
We'll be there when it starts again! :wave:
Doug
1973 Cuda 340, TF727, 8 3/4 3.55 posi

Offline torredcuda

  • Sr. Resident
  • ******
  • Posts: 6218
  • Epping NH joined 11/23/03
Re: Good news, Bad news!
« Reply #14 on: January 28, 2007 - 05:21:06 AM »
It looks like it would only take a few minutes with a hammer and dolly to fix `em up so I would n`t even bother making a claim.Even if you bought all NOS parts there would be lots of fitting and hammer work.I know it sucks to get damaged goods but I wouldn`t sweat it.UPS will blame packaging and Sherman will blame handling.
Jeff
72 Barracuda 340/4spd  Torred
70 roadrunner 383/auto  In-Violet
70 Duster 360/auto drag car  (Petty Blue soon)
04 Ram 2500 5.7 Hemi