Need 22", have 26" radiator shroud

[buzzard]

BIG eh   once you have seen these ill get rid of them .   im just happy to get them for you . as time goes on maybe ill be able to make small ones. this only took 1/2 hour

[RUSTY Cuda]

Dang that don't look right, i think the one I need has more offset to it, I'm lookin for # 2998328 

[buzzard]

will send new pics tomorow or sunday. i have both, youshould measure your holes [26-12.25] 27.5-12.5] aprox. i think one is with and without air or small rad towing package.

[buzzard]

pic time again

[buzzard]

he's a big on . im working on it

[RUSTY Cuda]

that looks more like it, i'm not sure what I should have, no brackets there, there was one a those aftermarket plastic bolts through the rad deals on it. you wouldn't have the brackets too? Rich.

[RUSTY Cuda]

The car was a 318 no air car,I'm going by #'s posted around the boards for such a car, I'm hoping they are correct? Rich
Finally dug out some arm rests, I found the blue ones, pics to follow, I can't seem to find the white ones, they were bad & I might have thrown them away.
You nudged me to open up the year one pads I bought, they are a bit crappy, but I will use them on the 73, when I do the 74 I my refinish my other blue set,just a tad better than this pair.

[buzzard]

what date coad for the 73. it was in early 73 that the factory put any available parts into e body cars. ill look for the paper it was in. good luck on returning year one arm rests. ibough some to and they are junk. year one is giving me a hard time about returning them. arm rests look good. ill se if i can find some clips for the shroud. only an idea if these items are mailed as a gift, i am told there will be no duty or customs charges. if i can find some i should have shroud bolts also. tks

[RUSTY Cuda]

OK, sounds good to me, I never shipped anything out of the country, if you could just let me know how to mark the package, over at nuts there's a lot of canadians, if your not sure i can ask over there.
Where is the date code, is that in the vin tag or the fender tag ? Rich.

[buzzard]

Where or what is nuts and please chech with them. If you have your fender tag go to 2nd line from btm. right to left 6 group then 3 group. 3 group is the date code. 1-jan, 2-feb, 3-mar, 4-apr, 5-may, 6-june, 7-july, 8-aug, 9-sept, A-oct, B-nov and C-dec. Btn line right to left 6 group then 3 group the mid. of the three is a number, 0-70, 1-71, 2-72, 3-73 and 4-74. Ops on the first group of 3 the last two numbers are the day.

[RUSTY Cuda]

K looks like 6/14 lost ya on the bottom line, but looks like 73 , with a 6 month date ,too late (or early) to have been a 72 build for 73 anyway bottom line reads   E44 D34 BH23G 3B527310.
I see if I can get some shipping info , Rich.

[buzzard]

E 44-eng. codes [318], D34-trans codes [A904], B-barracuda], H-price class [high], 23-2dr. h/top], G-eng.code [318], 3-year[1973], b-plant code[Hamtramck] and 527310-sequence no.

[RUSTY Cuda]

Looks like there's a form to fill out when you ship it, declare as a gift & that should be it, we just have to decide what value to place on the parts & fill that in too, don't mention trade(then the gift part goes away)  & we should be good to go, PM me the shipping info & next week I'll box em up & hit the post office, see how it goes on my end, if you need a few bucks thrown in, The shroud is a pretty hard part to locate & I will include a check or money order with the arm rests. Rich.

[buzzard]

Rusty it's what you need and is great if we can horse trade. We are not playing with matching #. Just some hard parts to find. I'll go to the P.O. here and see what they say. Then I can get back to you. Where can I get a light tube for a 74 ralley [cuda] dash. Now I know who nuts are.

[RUSTY Cuda]

I have seen those on ebay, while crusing the parts & accessories section under barracuda, if I see em again I'll post a link. Rich.