Author Topic: Paint removal on aluminum?  (Read 2229 times)

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Paint removal on aluminum?
« on: March 14, 2007 - 12:30:47 PM »
Hi guys,

I picked up an old Mr. Gasket Street Scoop and it originally was polished aluminum but the previous owner painted it blue.

Is there an easy way to remove the paint without hurting/ scratching the aluminum finish?  Some of the paint can be taken off with my finger nail so it really isn't bonded on too well.

I've heard of people using Easy Off oven cleaner.  Would this be appropriate to use in this case?

And what would be the best way to polish the aluminum?  Can you just use polishing compound?

Thanks for any advice!  :)

1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Paint removal on aluminum?
« Reply #1 on: March 14, 2007 - 12:42:13 PM »
I have used paint remover, although not on aluminum, that I picked up at Adavance Auto Parts, made by Mar-Hyde called Tal Strip that is made for aircraft & is recomended for use on aluminum. 
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Paint removal on aluminum?
« Reply #2 on: March 14, 2007 - 12:53:30 PM »
Thanks for the info, bullitt!

I'll keep that name in mind next time I go to the parts store.


How about polishing it?  Easy off?  Anybody have any ideas?
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Stacked440

  • Sr. Member
  • ****
  • Posts: 1026
Re: Paint removal on aluminum?
« Reply #3 on: March 14, 2007 - 02:20:59 PM »
I have used paint remover, although not on aluminum, that I picked up at Adavance Auto Parts, made by Mar-Hyde called Tal Strip that is made for aircraft & is recomended for use on aluminum. 

 :iagree: :iagree:

I'd just use some carnuba wax on it to polish the alum :2cents:
-Kyle-
1971 Challenger R/T clone 440/5-spd
1973 Duster - 5.7L Hemi swap project

Offline MEK-Dangerfield

  • C-C.com Expert
  • ********
  • Posts: 20946
  • I don't get NO respect! Member since 1/25/2002
Re: Paint removal on aluminum?
« Reply #4 on: March 14, 2007 - 03:07:33 PM »
I wouldn't use "Easy Off" on aluminum. That is pretty harsh stuff, and I'm sure it would tarnish the finish. Steel yes, aluminum no.  :grinno:


  Mike

Mike

1970 Challenger - SOLD
2016 SXT+.  1 of 524 SXT+'s in Plumb-crazy for 2016.

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Paint removal on aluminum?
« Reply #5 on: March 14, 2007 - 03:19:14 PM »
Cool!  Thanks for the replies guys!  :2thumbs:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Paint removal on aluminum?
« Reply #6 on: March 14, 2007 - 03:20:42 PM »
Gonna slap that hood on eh? :bigsmile:

Good for you!

Tom :bigsmile:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline IMNCARN82

  • Resident
  • *****
  • Posts: 3547
  • LeDZeP
Re: Paint removal on aluminum?
« Reply #7 on: March 14, 2007 - 04:05:51 PM »
I have alot of experience at this...     I'd use a chemical stripper.    Then a product called "neverdull" It's a polishing compound that's in a wad.   wipe this on and scrub.   remove with clean rag,polishing the surface.   sand out any big scratches.   it really works on all metals
'73 340 5 speed,RMS,BAER,... "Supercuda" (O[   ]||||[   ]O)  
'69 Dodge Charger 383,Auto                  (OiiiiiiiiiiIiiiiiiiiiiO)
13' Challenger R/T BlacktoP  6spd. (OO________OO)
71' Demon
75' Duster
87' Conquest TSI
56' Plaza
Boulder CO
Robert    "cuda bob"

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Paint removal on aluminum?
« Reply #8 on: March 14, 2007 - 05:54:40 PM »
Gonna slap that hood on eh? :bigsmile:

Good for you!

Tom :bigsmile:

I don't waste anything!  I got the scoop from a guy in Dedham off craigslist.  I love that site!  It's a little darker than the hood.  The kids don't want me to take off the stars!!!  :bricks1:  Thanks again for the hood!  :thumbsup:

Thanks for the info, IMNCARN82.  I'll check it out!  :thumbsup:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline Stacked440

  • Sr. Member
  • ****
  • Posts: 1026
Re: Paint removal on aluminum?
« Reply #9 on: March 14, 2007 - 06:38:26 PM »
That logo in your signature is the perfect challenger logo! I like it! :2thumbs:
-Kyle-
1971 Challenger R/T clone 440/5-spd
1973 Duster - 5.7L Hemi swap project

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Paint removal on aluminum?
« Reply #10 on: March 15, 2007 - 06:54:12 AM »
That logo in your signature is the perfect challenger logo! I like it! :2thumbs:

Thanks!  :)

It's a logo I made up from an image from the mascot thread.
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline torredcuda

  • Sr. Resident
  • ******
  • Posts: 6218
  • Epping NH joined 11/23/03
Re: Paint removal on aluminum?
« Reply #11 on: March 15, 2007 - 07:00:28 AM »
Aircraft stripper to remove the paint and any good aluminum polish like Mothers,Neverdull etc. and then wax it up.
Jeff
72 Barracuda 340/4spd  Torred
70 roadrunner 383/auto  In-Violet
70 Duster 360/auto drag car  (Petty Blue soon)
04 Ram 2500 5.7 Hemi

Offline MOPAR FANATIC

  • Resident
  • *****
  • Posts: 4250
Re: Paint removal on aluminum?
« Reply #12 on: March 15, 2007 - 09:16:32 AM »
Aircraft stripper to remove the paint and any good aluminum polish like Mothers,Neverdull etc. and then wax it up.
  :iagree: My thoughts exactly!  :thumbsup:
71 Challenger 340 a/t
2013 Plum Crazy Hemi R/T 6SPD

Offline ChallengerGary

  • Resident
  • *****
  • Posts: 3040
    • Challenger Gary
Re: Paint removal on aluminum?
« Reply #13 on: March 15, 2007 - 09:47:00 AM »
 :iagree:  Exactly correct - Afterall Airplanes are made from Aluminum :thumbsup:
2006 Dodge Ram 1500 Mega Cab 5.7 Hemi

1972 Dodge Demon - "new" project

AND TOO MANY OTHER MOPARS THROUGH MY HANDS TO COUNT

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Paint removal on aluminum?
« Reply #14 on: March 15, 2007 - 05:22:51 PM »
Sounds good!  Thanks guys!  :2thumbs:


But what is aircraft stripper?   :clueless:  Some lady who takes off her clothes on a plane?  :roflsmiley:

No, seriously, what is it and where can you get it?  :dunno:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger