Inner fender diagrams

[Stacked440]

Anyone have any diagrams for what goes in all the holes on both inner fenders?

[Lunchbox]

Pass side Pic A

1. Washer Bottle
2. Horn Mounts
3. A/C Drier
4. Plastic Wire Hanger (White single stud)
5. Water Valve
6. Rubber Shield Retaining Clips
7. Plastic Wire Hanger (Black single stud looks like a D)

Driver Side Pic B

1. Rubber Shield Retaining Clips
2. Brake Proportioning Valve
3. Plastic Wire Hanger (White single stud)
4. Plastic Wire Hanger (White single stud)
5. Starter Relay
6. Plastic wire Hanger (Black dual studs)
7. Clip built into harness clips here

Home this is good.

Lunch

[Stacked440]

thats perfect thanks!

[Lunchbox]

thats perfect thanks!

Theres 4 on the top I didn't have a shot of but three are for fender tags and 1 for A/C hose. I also left the battery tray stuff out thats a no brainer. 

Lunch

[BIG MIKE]

on the pass number 5 said water pump...is that the heat control valve that your talking about?

[Lunchbox]

on the pass number 5 said water pump...is that the heat control valve that your talking about?

Yes, I meant water valve. Thnaks Big Mike

Lunch

[ksierens]

Isn't 7 on the drivers side where the battery hold down stud goes?

[Lunchbox]

Isn't 7 on the drivers side where the battery hold down stud goes?

Heres he pic I think the lower hole was for the hold down but not a 100% sure since my car didn't come with a hold down or battery.

Lunch

[Challenger6pak]

Thanks for the diagrams Lunchbox. 

[71bigblock]

Thanks for the diagrams Lunchbox. 

 

Thanks, I got them saved, and will look at them when I tear mine apart.  Or put it back together I shoud say   

[PlumCrazy]

Battery tray.