Silver Bullitt's progress

Author Topic: Silver Bullitt's progress  (Read 33419 times)

Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: Siver Bullitt's progress
« Reply #15 on: April 22, 2007 - 08:31:55 PM »
Hey Wade.  You know you don't have to get so techinical with all that stuff. :clueless:  Just  say you got her lined up.  Now where are some more pics..... :useless:..We show you ours so...................
Dave or David




Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Siver Bullitt's progress
« Reply #16 on: April 02, 2008 - 08:40:50 PM »
Revisited the front end today. The sway bar bushings I installed the 1st time were just a smidge short even though I had measured & ordered what appeared to be the correct size,wuz gonna engineer around it....Well low & behold I was surfing the Advance Auto parts site & they now list a Energy Suspension 7/8" Front Say bar bushing for the challey....The local store could not order would have to order on line & pay shipping so I went to Auto Zone & they got in 2-days p# 5.5113G   for  $13.99+tax....no shipping....I HATE paying shipping (there is also a 15/16" set listed)  Anyways put them on today & was impressed that they even had indention's on the bottom to hold the OE bracket correctly. 


 
« Last Edit: October 03, 2009 - 04:56:20 PM by Bullitt- »
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline LAA66

  • Sr. Member
  • ****
  • Posts: 1669
Re: Siver Bullitt's progress
« Reply #17 on: April 02, 2008 - 10:18:19 PM »
 Looks like your moving forward. Is that a small block lurking under the hood? :jumping:

  Just curious as I have a set ready to go.whhich way did you position the UCA bushings? I have seen the directions that come with the Moog parts for max caster along with other options. :clueless:

Offline DAYLEY/CHALLENGER

  • Resident
  • *****
  • Posts: 3157
  • Still My Inspiration..1971, Rockingham, Nc
Re: Siver Bullitt's progress
« Reply #18 on: April 02, 2008 - 10:27:10 PM »
 :bigsmile:  Wade...........glad to see some movement on the car.  Do you have a time table in mind for the completion.?   Looking good and it looks like you pay attention to detail.    :2thumbs: :2thumbs: :2thumbs: :2thumbs:   David
Dave or David

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Siver Bullitt's progress
« Reply #19 on: April 02, 2008 - 10:28:59 PM »
Looks like your moving forward. Is that a small block lurking under the hood? :jumping:

  Just curious as I have a set ready to go.whhich way did you position the UCA bushings? I have seen the directions that come with the Moog parts for max caster along with other options. :clueless:

Yep that's the original 50K mile 340.    As for the UCA bushings the rear was rotated max inboard with the front rotated max outboard to gain max postive caster, this pulls the upper ball joint as far back as it will go.   I guess you read my post of 5/22/07....will have to put it in a front end machine to see how well the MADMAN camber gauge worked.  :icon16:
« Last Edit: April 12, 2008 - 07:12:13 AM by bullitt99 »
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Siver Bullitt's progress
« Reply #20 on: April 02, 2008 - 10:34:55 PM »
:bigsmile:  Wade...........glad to see some movement on the car.  Do you have a time table in mind for the completion.?   Looking good and it looks like you pay attention to detail.    :2thumbs: :2thumbs: :2thumbs: :2thumbs:   David

Well when I started this in the fall of '05 the goal was hav it finished by the summer of '07................. Life gets in the way and I'm a victim of the domino effect, the day I decided to fix the brakes turned into 3+ months of taking the entire front suspension out, I figure do it once, hopefully & save time in the long run, then the heat of last summer was unbearable yada yada and here we are with not much progress in 10 months.   If its drivable this year I'd be thrilled.

Wade
« Last Edit: April 02, 2008 - 11:03:49 PM by bullitt99 »
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Siver Bullitt's progress
« Reply #21 on: April 02, 2008 - 11:27:18 PM »
Bullitt, redid your wheels for you.  They are a bit better anyways.  Not quite as dark, I could make the spokes darker?   :dunno:  Use it how you want.   :bigsmile:

That suspension is beautiful thus far.   :cheers:

Edit:  Looks like Mustang wheels, I could take that off, too.   :rofl:
« Last Edit: April 02, 2008 - 11:28:59 PM by 71bigblock »

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Siver Bullitt's progress
« Reply #22 on: April 03, 2008 - 12:47:56 AM »
Waaaa?!?! You no likey my crooked wheels?.....Think I prefer em a little darker....thanks for the assist.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline hezzel

  • Sr. Member
  • ****
  • Posts: 1105
  • Matching numbers 383 Magnum ,727 at and 3:23 rear
Re: Siver Bullitt's progress
« Reply #23 on: April 03, 2008 - 03:03:18 AM »
Nice looking project :2thumbs:
1971 Dodge Challenger R/T
2019 Toyota Rav4 Hybrid

Offline 422STROKER

  • Sr. Resident
  • ******
  • Posts: 5386
  • Member Since 6/3/06
Re: Siver Bullitt's progress
« Reply #24 on: April 03, 2008 - 07:08:07 PM »
Glad to see it moving along.  I remember your post on the how-to speaker in the kick panels a long time ago.

Tom :2thumbs:
Tom
12.77 @ 108.87 15" Street Drag radial tires 3.23 gear

Offline thedodgeboys

  • Resident
  • *****
  • Posts: 3633
  • ''Normal’s Overrated''
    • THE DODGE BOYS
Re: Siver Bullitt's progress
« Reply #25 on: April 05, 2008 - 08:28:06 AM »
 :2thumbs: :2thumbs:

 :bananasmi Car is looking good what about a little red stripe down the side?
Go Fast & Have Fun...
70 6.1 HEMI 6-speed Drop Top...

Offline Bullitt-

  • Permanent Resident
  • *******
  • Posts: 12167
  • Better Things To Come Member Since 2/16/06
Re: Siver Bullitt's progress
« Reply #26 on: April 05, 2008 - 08:58:15 AM »
Ya know I've thought that a bright red, the color on the "four barrel" hood call outs, would make a good accent color but I've pretty much decided to stay silver w/black or possibly a darker silver stripe to accent.
Wade  73 Rallye 340..'77 Millennium Falcon...13 R/T Classic   Huntsville, AL
Screwed by Photobucket!

Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Siver Bullitt's progress
« Reply #27 on: April 05, 2008 - 10:37:20 AM »
Hmmm...  Darker Wheels, and a bit more red a few places.   :2thumbs:

Offline thedodgeboys

  • Resident
  • *****
  • Posts: 3633
  • ''Normal’s Overrated''
    • THE DODGE BOYS
Re: Siver Bullitt's progress
« Reply #28 on: April 05, 2008 - 09:35:48 PM »
What if the top strip was short next to the door gap with each stripe a little longer as you go down. :thinkerg: :clueless:
Go Fast & Have Fun...
70 6.1 HEMI 6-speed Drop Top...

Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Siver Bullitt's progress
« Reply #29 on: April 05, 2008 - 10:54:13 PM »
Ask and ye shall receive.   ;D