offering this as a possible parts car basically the front clip is in one piece ( before I cut the rest of it ) - title and copy of the build sheet from Haggerty Ins. claim.
quick story she was an all original real cuda second owner only 27000 original documented miles before the barn burned that transformed her from beauty into the beast!
I cut it in pieces to remove the rusted floors that were shot from all the debris ( burned wood piled up at least 2' high inside soaked with water and sitting for about two years - melted glass - dash - interior - exterior paint - burned up tires ect.
cut the roof, quarters & fenders off since the metal was beyond repair. doors, trunklid where tossed out because they too had way too much wrapage to even try and save.
http://i141.photobucket.com/albums/r71/440whiteboy/parts%204%20sale/DSCN0325.jpgWhen have you ever seen a car like this one before?
I think I'm holding the new title ' king of the pile' now that I own it!!!
my hope was to see if anyone wanted it before I remove whats left. firewall half way down is gone with the center wiper motor area, brake area still good as is the A/C - heater passenger side outlets. complete front frames, tortion bar crossmember, inner fenders, large block radiator support, upper cowl. It has surface rust both sides. whats left of it is solid metal with surface rust on both sides. It would need to have apply rust convertor on it all.
also the rear trunk gutter surround with sail panel and partial rear window is in one piece with the speaker tray and X brace.
I have the front door A pillars with the windsheild post and rockers however the kick panel next the firewall is not good.
________________________________________________________________
EMAIL -- IS BEST -- SINCE I DON'T GET TO THIS SITE THAT OFTEN -
naderboy@hotmail.com________________________________________________________________
$750-
complete front frames- 165 ea
tortion crossmember- 150-
trans support- 25-
large block rad support- 175-
Inner fenders- 100 ea
cowl top section- 150-
partial firewall- 75-
shock tower if removed-?
lower control arms for sway bar- 40 ea
sway bar- 35-
it has over $1200+ worth of parts-
price should reflect your labor and ship cost to pick it up.
rear trunk surround piece- 250-
door A pillar's- 65 ea.
front bumper core- 40
rear bumper core- 40
