Author Topic: Painting a T/A Hood  (Read 1504 times)

Offline TrakHor

  • Jr. Member
  • **
  • Posts: 108
Painting a T/A Hood
« on: April 17, 2007 - 05:51:29 AM »
I'm curious if anyone here has painted a T/A hood. If  so how'd you get good coverage under the overhang of the scoop?
Thanks
J




Offline farmboy70

  • Sr. Member
  • ****
  • Posts: 1636
Re: Painting a T/A Hood
« Reply #1 on: April 19, 2007 - 05:07:47 AM »
Dail the gun down to a narrow pattern and spray that area first on each coat, then open back up and do the whole hood to keep even coverage.
Dave

Offline 70 Challenger Conv.

  • Jr. Member
  • **
  • Posts: 49
  • Work in progress
Re: Painting a T/A Hood
« Reply #2 on: April 29, 2007 - 10:04:54 PM »
this was my first attempt with a gun, if you look close in person you can still tell there is not as much paint under the overhang though.
70 Convertible 572 Keith Black Aluminum Hemi ProFlow EFI 727 w/Gear Vendors OD added power door locks and power trunk release and keyless entry Rack and Pinion power steering... future change to 6 speed manual tranny

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Painting a T/A Hood
« Reply #3 on: April 29, 2007 - 10:27:29 PM »


LOVE that hood. Wonder if it'd look out of place on a 73 'Cuda? :lol2:
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline MJS73

  • Sr. Member
  • ****
  • Posts: 1522
    • Mike's 1973 Challenger
Re: Painting a T/A Hood
« Reply #4 on: May 17, 2007 - 08:51:53 AM »
Quote
LOVE that hood. Wonder if it'd look out of place on a 73 'Cuda?

Yes.

Mike
www.mikes73.com
Don't PM me - send me an e-mail at mjsavage2001@yahoo.com


Offline 70 Challenger Conv.

  • Jr. Member
  • **
  • Posts: 49
  • Work in progress
Re: Painting a T/A Hood
« Reply #5 on: May 17, 2007 - 05:21:33 PM »

LOVE that hood. Wonder if it'd look out of place on a 73 'Cuda? :lol2:

I personnally think it would look great but the Challenger hood doesn't fit. I have never seen a T/A Six pack scoop on a Cuda but I have thought about grafting one to a flat hood to see someday. My 74 Cuda has a shaker hood but it sure is a pain to take off and put back on when you need to get to anything on the top of the engine! I like the looks of the shaker but not the inconvenience. I say go with what you wish Mother Mopar should have done. Best of luck.  :bigsmile: :cooldancing:
70 Convertible 572 Keith Black Aluminum Hemi ProFlow EFI 727 w/Gear Vendors OD added power door locks and power trunk release and keyless entry Rack and Pinion power steering... future change to 6 speed manual tranny

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Painting a T/A Hood
« Reply #6 on: May 17, 2007 - 05:33:29 PM »



If you couldn't tell by the laughing smile MJS73 (  :lol2:  ) I was only joking. :thumbsup:
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline 70 Challenger Conv.

  • Jr. Member
  • **
  • Posts: 49
  • Work in progress
Re: Painting a T/A Hood
« Reply #7 on: May 17, 2007 - 06:03:18 PM »


If you couldn't tell by the laughing smile MJS73 (  :lol2:  ) I was only joking. :thumbsup:

Yeah, but I am serious! Which is funnier? :crazy:  :roflsmiley:
70 Convertible 572 Keith Black Aluminum Hemi ProFlow EFI 727 w/Gear Vendors OD added power door locks and power trunk release and keyless entry Rack and Pinion power steering... future change to 6 speed manual tranny

Offline MJS73

  • Sr. Member
  • ****
  • Posts: 1522
    • Mike's 1973 Challenger
Re: Painting a T/A Hood
« Reply #8 on: May 18, 2007 - 07:08:54 PM »
I know you were kidding.  I have a keen eye for the obvious!

Mike
www.mikes73.com
Don't PM me - send me an e-mail at mjsavage2001@yahoo.com


Offline cudabuyer

  • Sr. Member
  • ****
  • Posts: 1230
Re: Painting a T/A Hood
« Reply #9 on: May 19, 2007 - 05:50:49 AM »
here are mine
70 Dodge Challenger Convertible 6.1 Hemi


Offline 70 Challenger Conv.

  • Jr. Member
  • **
  • Posts: 49
  • Work in progress
Re: Painting a T/A Hood
« Reply #10 on: May 19, 2007 - 07:45:26 AM »
here are mine

Looks nice, I've never seen one other than black. :bigsmile: :wavingflag:
70 Convertible 572 Keith Black Aluminum Hemi ProFlow EFI 727 w/Gear Vendors OD added power door locks and power trunk release and keyless entry Rack and Pinion power steering... future change to 6 speed manual tranny

Offline cudabuyer

  • Sr. Member
  • ****
  • Posts: 1230
Re: Painting a T/A Hood
« Reply #11 on: May 20, 2007 - 04:29:03 AM »
it wuz a black fiberglas hood previously
70 Dodge Challenger Convertible 6.1 Hemi


Offline SilverChally

  • Sr. Member
  • ****
  • Posts: 1105
Re: Painting a T/A Hood
« Reply #12 on: May 20, 2007 - 10:10:48 AM »
this was my first attempt with a gun, if you look close in person you can still tell there is not as much paint under the overhang though.


Any more pics of the car?  Looks like its all blacked out, thats how I wanted to do mine, but only cause it has ac :roflsmiley:
70 challenger project
68 satellite

Offline HP2

  • Resident
  • *****
  • Posts: 4478
Re: Painting a T/A Hood
« Reply #13 on: May 20, 2007 - 08:27:50 PM »

LOVE that hood. Wonder if it'd look out of place on a 73 'Cuda? :lol2:

Pretty trick, I'd think. After all, the AAR style doesn't look too bad on a Challenger. Plus it'd really jack up the purists.