Well, if you need another trunk pic, lol
. I took that many b/c one, it's solid
, two for the defogger assembly/speaker..... Also wiring and the parts of the trunk that a regular pic wouldn't get.... Anyway.... Interior isn't bad. The top of the rear seat, by the package tray, at the seam on the drivers side is splitting (
), so it figures... Now I need to replace that seat covering, otherwise nothing was wrong with it.... The front seats need to be replaced, esp. the drivers side. The carpet will get replaced, plus I wanna get a look at those floor pans, hopefully the match that trunk.
Now that I've had a chance to see the loaded pic's.... As you can tell, I need a new trunk lid
, but atleast I don't need a trunk floor
. The 8 track stereo isn't in the car anymore, since it wasn't original, why worry with it?
After these pic's were taken, the interior got cleaned up, the carb that was in the back seat floor board came with the car, but is probably a 600 cfm Holley, it's got a transfer tube, and a manual choke (therefor it isn't original to the car). The added floor mats aren't in it now, and the seats are clean. The windows have mostly been washed, therefor they're alot better to see through
. The carb that's on the motor, is my old Holley #3310.... It's shot, but heck, if it gets the motor running for the mean time, then heck, why worry about it? On yet another side note, since there's a clear pic, now, of the intake, other than "It's an Edelbrock" does anyone know what model it is???
Topic: OK, so it's a B body, and not an E body, but it's a MOPAR (Read 4647 times)
