who carries black orangosol?

[Moparal]

My car is very close to finish now and I need to paint the lower black outs so I will be able to add the stripe on my barracuda

[RUSTY Cuda]

PPG has it, got it last week, the # the guy gave me is.........9355
                                                                                 DCC low gloss w/ reducer hardener (no clear needed)

Funny thing is he corrected me & called it organasol, so double check with your guy, I had it spelled like you out of the chrysler resto book? Rich.

[71340RT]

That is correct it is ppg concept DCC 9355 and gets reduced 6 parts paint 2 parts reducer and 1 part hardner. The stuff looks great and is some tough stuff with the hardner. I used lacquer at first and had gas run out my filler tube and it change the color. That is when I took the lacquer off and put the concept with hardner on and have not had a problem with the spilled gas since. This is on my tail panel of my cuda.
Alan when you spray this stuff make sure you have a good respirator as this is some bad stuff if you inhale it. It will make you sick and I found out the hard way going in after I had sprayed the stuff a hour later and was sick for around 10 hours from the stuff.
Jeff

[Moparal]

Thanks for the advice. And also the part number for ppg. The whole bottom of my car from front to rear splash pans and tail panel has to be painted with this paint. Do you think a half gallon is enough? I wanna be sure to get it right the first time.....thanks ALAN

[71340RT]

Hi Alan,
 The paint covers pretty good so I would think a half gallon would be enough wants you reduce it.
Jeff

[Moparal]

Hi Alan,
 The paint covers pretty good so I would think a half gallon would be enough wants you reduce it.
Jeff

Thanks Jeff, I'm going to try to get some this week coming up. I stopped by the body shop and they are ready for me...ALAN