Well, since my hood and grill are awol, I started on the interior. Went pretty good, I got the Foil insulation, carpet, seats(ebay covers 250 bucks) and rear panels installed. Seatbelts and console as well.
I replaced the broken glass, greasy dirty mess that was. Some of the parts were missing from the break, but with a little backyard mechanic got it done. I used some inner tube from a flat on my bicycle as the gasket on the rollers as my stuff was long gone. I also used this on the outer guides with some contact cement and the glass seems nice and tight.
Swaped the Ignition key cylinder, tricky but the FSM came up big, plus a few topics on the board lately helped as well.
I cleaned up and installed my heater box as well. It is unbelievable what you find in there....Profelactic(sp), thankfully in the package! Mostly leaves and sticks, some media from the blaster as well. I used some foam insulation to seal up the trap doors as the original stuff was like dust.
Next up are the power door lock final connections and front door panels. I need to pick up my lock retainers for the handles soon.
Got my homemade speaker box installed as well, put the trunk liner in too.
Tom
