Author Topic: Just joined, and i am impressed with this site.  (Read 2646 times)

Offline Chlngrcrzy

  • Sr. Member
  • ****
  • Posts: 1410
Just joined, and i am impressed with this site.
« on: August 03, 2007 - 09:55:36 PM »
I had no idea there were so many people out there that loved old mopars. Many years ago when i was just a lad, My two uncles had a 70 roadrunner and the other a Coronet 500. I decided then that i was going to get one myself someday. I finally found what i thought was a good deal. 73 Challenger, with a 318. Body is solid, engine runs well,BUT. Here it is, well i took the vinyl top off and was a little taken back. Rust clear through above the rear window and the front window. Dutchman panel completely shot also. I Am going to need some help with the roof. I am a pretty good mechanic and love to learn and not afraid to try something myself. In fact i want to do most of it myself. Is there any body in S.E. Washington(State) that might be willing to lend an ear to my plight. Anybodies help would be greatly appreciated.




Offline 4Cruizn

  • Administrator
  • C-C.com Expert
  • *****
  • Posts: 18521
  • HEMI FISH
Re: Just joined, and i am impressed with this site.
« Reply #1 on: August 03, 2007 - 10:03:15 PM »
Welcome aboard crazy!  Lets see how bad the cancer is . . we have alot of great people here on the site that I'm sure can help guide you in a direction that will aid in your repair.    Definitely post some pics of your score! 





Offline Street_Challenged73

  • Sr. Resident
  • ******
  • Posts: 8826
  • '73 FC-7 Challenger..Member since October 20, 2002
    • My '73 Challenger Restoration Page
Re: Just joined, and i am impressed with this site.
« Reply #2 on: August 03, 2007 - 10:47:42 PM »
Welcome to the site, ChallengerCrazy! :wave:  Glad you found us. :2thumbs:  As for your question, there are plenty of well-educated bodymen and general do-it-yourself people here to give you a good idea as to go about fixing your roof rot.  One person I'd probably get in touch with is DMZ73 (Dan) for some awesome information on how to go about sheetmetal fabrication/installation.  Perhaps you could make a separate post in "The Body Shop" section of the site and monitor the results you receive through there. :cheers: :thumbsup: (There's so many great sheetmetal guys here it's hard to give you all their screen names. :2thumbs:)
1973 Dodge Challenger......................The ongoing project. (00/----\00)
1991 Dodge Stealth R/T Twin-Turbo....The sunny day cruiser (RTBoost)
1990 Toyota Celica GT Liftback...........The new daily & winter driver.
All-American Muscle: 'Cudas and Challengers...Still the Elite and always will be.

                                                                                             
                 
Street_Challenged73 from Wisconsin

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Just joined, and i am impressed with this site.
« Reply #3 on: August 03, 2007 - 11:11:09 PM »
Hi Challengercrazy!  Welcome!  :wave:

Any pics, we like pics here, no matter what shape/condition the car is in!

Roof skins....there was one a little while back ago but I think it's gone now.  I think moparclown had one didn't he?  I think someone else too.  Best find one locally.  I can't imagine what it costs to ship one of those babies!

If I'm not mistaken, all year Challengers use the same roof if that helps.

Lotsa nice people here with lotsa info!  Just ask!  :)
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline 71340RT

  • Resident
  • *****
  • Posts: 3502
Re: Just joined, and i am impressed with this site.
« Reply #4 on: August 04, 2007 - 12:56:39 AM »
Welcome to the site and I'm sure we can give you some good advise once we all see some pictures.


70 Plymouth Cuda 340 4-speed
71 Dodge Challenger RT 340 automatic
1973 Dodge Challenger 360 automatic EFI
2002 Harley Davidson Dyna Wide Glide
2003 Dodge Stratus RT coupe
2009 Challenger RT Classic B5 Blue
2014 Ram Express 5.7 Hemi 4X4

Offline Jacksboys

  • Sr. Resident
  • ******
  • Posts: 5540
  • Here Since 08/28/06 GEORGIA
Re: Just joined, and i am impressed with this site.
« Reply #5 on: August 04, 2007 - 01:03:11 AM »
Welcome to the site.  As you can tell , we love pictures.   :bigsmile:  I am sure you will get some good info on fixing your Challenger from this site.   :2thumbs:
1971 Dodge Challenger:  360/904/3.23
   
Success is the maximum utilization of the ability that you have. - Zig Ziglar

Offline 360 'CUDA

  • Sr. Resident
  • ******
  • Posts: 5784
Re: Just joined, and i am impressed with this site.
« Reply #6 on: August 04, 2007 - 01:27:41 AM »
Welcome!!  :wave:

I'm a little far away to help but good luck on your project!! :2thumbs:

Offline Chlngrcrzy

  • Sr. Member
  • ****
  • Posts: 1410
Re: Just joined, and i am impressed with this site.
« Reply #7 on: August 05, 2007 - 02:00:18 PM »
I am still trying to send pictures. I am having a tough time getting them to resize, so the site will stop rejecting them.

Offline Dave-R

  • Jr. Member
  • **
  • Posts: 154
    • Challenger Message Board
Re: Just joined, and i am impressed with this site.
« Reply #8 on: August 05, 2007 - 02:26:24 PM »
Easy way to resize your images is to use Irfanview. It is a small program and is free.

http://tucows.com/preview/194967

The areas around the front and rear glass are common rust areas. Usually they can be repaired easily in short sections at a time (so stressed areas don't pop out) with simple angled steel. But obviously you need something to weld to so if it is as bad as you suggest you will indeed need to find a good roof to swap over. Good luck with that. Dodge never painted under the vinyl tops so your best bet is to find a doner that came without one.

Offline Tropicalcats

  • Resident
  • *****
  • Posts: 3488
  • Don't Ever, Ever Give Up
Re: Just joined, and i am impressed with this site.
« Reply #9 on: August 05, 2007 - 02:27:35 PM »
Welcome aboard. You have found a great site to be part of. I'm sure you will find all the info you need to make your project a success.

To resize pics go to the home page and click on tools or click on this link. Pictures are usally best at 800x600 http://www.cuda-challenger.com/html/tools.php

Because..............
 :useless:
« Last Edit: August 05, 2007 - 02:48:14 PM by Tropicalcats »
1970 Challenger R/T 383  Matching#s JS23N0E under construction. It's Plum Crazy
SOLD

Offline ksierens

  • Sr. Member
  • ****
  • Posts: 1408
    • 70 Challenger Resurrection
Re: Just joined, and i am impressed with this site.
« Reply #10 on: August 05, 2007 - 02:43:14 PM »
Welcome to the site.  When I bought my A pillars about 2 years ago, I think Dessert Valley Auto Parts had 1 or 2.

http://www.dvap.com/
1970 Triple Black Challenger R/T  440 Six Pack - 4 Speed - 3.55 Dana
Kurt - SE Michigan

Offline Chlngrcrzy

  • Sr. Member
  • ****
  • Posts: 1410
Re: Just joined, and i am impressed with this site.
« Reply #11 on: August 05, 2007 - 07:21:32 PM »
Let me try sending a couple pictures again. I do think i have plenty of good metal to weld to. Some of the window channel is rusted through also.

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Just joined, and i am impressed with this site.
« Reply #12 on: August 05, 2007 - 08:21:57 PM »
Welcome to here! That rust sucks, I am sure you will find a good donor roof here or someone will point you in the right direction. I do love that pistol grip shifter sticking out in that one pic  :bigsmile:
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline Super Blue 72

  • Permanent Resident
  • *******
  • Posts: 12711
  • "Big 'n Little" Member since 8/9/05
    • Phil's Super Blue '72
Re: Just joined, and i am impressed with this site.
« Reply #13 on: August 06, 2007 - 11:28:10 AM »
Welcome to here! That rust sucks, I am sure you will find a good donor roof here or someone will point you in the right direction. I do love that pistol grip shifter sticking out in that one pic  :bigsmile:

That pistol grip makes it all worth while!!!  :burnout:

For the fun of it if you're going to do the roof anyhows, I would go convertible for a few days!  Get out the Sawzall!!!  :crazy:
1972 Dodge Challenger Rallye 340, AT, Code TB3=Super Blue, SBD=8/17/1971.  Yes, a Rallye without the fender louvers from the factory because of the body side molding option.

Pic #2 and 3 of my ARII 1/24 scale model car 

Phil in New England-Massachusetts  Always thank God for what you have!

http://www.cardomain.com/ride/456046/1972-dodge-challenger

Offline moparman11

  • Jr. Member
  • **
  • Posts: 299
Re: Just joined, and i am impressed with this site.
« Reply #14 on: August 10, 2007 - 10:47:07 AM »
welcome, you have your work cut out for you, but it can be fixed, so just hang in there, you will make it, John
1973 RALLYE CHALLENGER