71 cuda clone 440-6 engine is a 72hp block 30 over closed chamber heads iron six pack dated 70 engine put 400 hp and 500 ftlbs to the tires! car has a 4spd trans pistol grip rebuilt by dave johnson has 100 miles since rebuild! rear is a dana 60 3.54 trac lok rebuilt with less then 500 miles on it. body is nice and straight shot in spies hecker paint primer etc in sublime green has a black vinyl top and black billboards!
The car is well optioned however not originally: originally it was a "deputy" non roll down windows in the rear...now it has full power windows, air conditiong almost all hooked up, power steering power, disc brakes, shaker hood (repop from NW perf) an orig go wing, orig roadlamps, rallye dash redone by perf car graphix with white faces, front seats are legendary rear orig in black,console,dash rev indicater,cuda door panels,door top moulding& tail panel trim,and even has a remote trunk release!
The car runs well, is fast and turns alot of heads! it has 2in hooker comp headers into 3 in tti out thru 3 in stainless cuda tips thru the valance, car has power steering with the cooler like every axle package car should, power disc brakes with 2 pc valve, fuel is supplied by a holly blue pump and lit by a full msd ignition (6al with a pro billit dist) taylor wires finish!
the car was redone before alot of repop parts were available so most everything short of the shaker is orig parts, the fenders were stamped by Jeff at J&J and the inserts replated, new door handles etc the car shows very well and trophys when it goes, the car was built to be a driver so all stainless lines underneath, its rolling stock is a set of weld prostars 15x8 all around 275s in the back 235s in the fron 15in
please email with anyquestions
pnypwr@gmail.com Im asking $55,000 for it and its located in ct thks
