Looking for a different hood

[Morris'_Mopars]

Since I put in my new engine with the Indy intake and dominator carb, it is very tight for hood clearance. I currently dont even have a air cleaner on the engine. I am looking for a different hood but want to keep the look somewhat stock. I like the AAR hoods but am not sure if there is enuf clearance. Does anyone know of a company that makes the AAR style hood but in a taller version? Or any other suggestions are welcome.

[HP2]

The AAR hood should net you 2-3 more inches of space. No one offers a taller version of the AAR style. You would have to section and stretch if yourself, or pay some bucks for the manufacturer to do it. That actually may be possible since they typically build to order on fiberglass parts.

[dandsgcuda]

Here is a lik to "SHOWCARS"they have all kinds of fiberglass parts even raised ARR hoods. http://www.showcars-bodyparts.com/barracud.html:grinyes:

[Morris'_Mopars]

Here is a lik to "SHOWCARS"they have all kinds of fiberglass parts even raised ARR hoods. http://www.showcars-bodyparts.com/barracud.html:grinyes:

Cant view anything....

[HP2]

Here is a lik to "SHOWCARS"they have all kinds of fiberglass parts even raised ARR hoods. http://www.showcars-bodyparts.com/barracud.html:grinyes:

Aiiieehh!! They make some dang scary parts. I had a bumper from them that was the biggest turd a$$ piece of dog squeezin I've ever seen. Thin gel coat, twisted part, visiable parting lines, untrimmed edges. I know 'glass requires some finishng, but theri stuff was like a jr high shop project gone bad.

[360 'CUDA]

I have one of those '69 6BBL style hoods. (not as high as the Paste on style 6BBL hood) They look OK but they catch alot of air going down the street


Here is a couple of resized avatars for you guys if you want.....

[IMNCARN82]

I'd look into that hood by MCR. It's a custom carbon AAR lookn' thing.  About 2 inches taller in the scoop. Pricey though.

[Morris'_Mopars]

I'd look into that hood by MCR. It's a custom carbon AAR lookn' thing.  About 2 inches taller in the scoop. Pricey though.

MCR..

[nivvy]

I have seen a raised aar hood...looks sweet as heck..... I am going to have my T/A raised and for clearance with the indy heads and 4500 indy intake...

[IMNCARN82]

MCR..

Muscle car restorations.....

[torredcuda]

Or just make your own raised AAR hood-that`s what I`m doing.

[Morris'_Mopars]

.... I am going to have my T/A raised and for clearance with the indy heads and 4500 indy intake...

That is my set up except I have eddy heads and Indy 4500 intake

[Morris'_Mopars]

Does MCR sell hoods? I didnt see anything for sale....i did see the hood on the Cuda and it looks SWEET!

[nivvy]

That is my set up except I have eddy heads and Indy 4500 intake

are your edelbrocks max wedge ported or do you have the dual plane indy???

max height is 13.25 to top of T/A hood 440 based block.....but I have the 2" 4500 to 4150 adapter.....either way 13.25 max! and i run a aircleaner also... need 14.00 for indy/indy clearance with aircleaner...

[torredcuda]

Does MCR sell hoods? I didnt see anything for sale....i did see the hood on the Cuda and it looks SWEET!

They might not have it listed -you may need to inquire about it.