Author Topic: 8 3/4 rear end supplier (Read 1664 times)

JeffC · « **on:** December 31, 2003 - 11:08:49 AM »

Hi,

Have a '72 Challenger, engine has been upgraded from a 340 to a pretty strong 440. It has the 741 rear end, open, with 3.55 gears and it in need of bearings, seals, etc.

Rather than spending time on the 741, does anyone know of a good source for a functional 742 or 489 with SureGrip?

Looks like Ring & Pinion sells them for about 950-1250 without a core. Not opposed to that, just wanted to see what other options were available.

Have found a local junk yard with an open 489 for $250.00 out of a '72 Fury (police). Any ideas?

Thanks in advance...have a happy new year!

Jeff C

1973challenger360 · « **Reply #1 on:** December 31, 2003 - 09:15:10 PM »

250 seams a little steep, try looking at some trucks as lots had 3.55 posi

JeffC · « **Reply #2 on:** January 01, 2004 - 06:36:52 AM »

Will do, thanks

JeffC · « **Reply #3 on:** January 04, 2004 - 06:00:23 AM »

Found one on Ebay...a 742 with the Dana Power-Lok. Now I just need to rebuild it to be on the safe side and replace the 3.23 gears with something a little more fun.

keith · « **Reply #4 on:** January 06, 2004 - 07:02:25 PM »

hey jeff, i'll take those 3.23 gears off ya!

Author Topic: 8 3/4 rear end supplier (Read 1664 times)

JeffC

8 3/4 rear end supplier

1973challenger360

Re:8 3/4 rear end supplier

JeffC

Re:8 3/4 rear end supplier

JeffC

Re:8 3/4 rear end supplier

keith

Re:8 3/4 rear end supplier