Long term project Engine Build 440

News:

  • Home
  • Help
  • Chat
  • Login
  • Register

    • « previous next »
    Pages: 1 ... 3 4 [5] 6 7 ... 16

    Author Topic: Long term project Engine Build 440  (Read 60441 times)

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Re: Long term project
    « Reply #60 on: February 23, 2008 - 02:25:36 PM »
    Here is my next project. 2 lower patch panels and a marker light cut out. I am converting my side marker lights over to the 70-71 style. Real simple with these cut outs. But before i can get started on those, i have a few honey do projects to clear up. Had to tile the kitchen and dining area this winter, and now i just have to finish up the trim around the base. :blah:
    Logged


    Offline DMZ73

    • Sr. Member
    • ****
    • Posts: 1482
      • http://www.pbase.com/dmz73/
    Re: Long term project
    « Reply #61 on: April 11, 2008 - 01:04:48 PM »
    Thanks for the tip.
    Wow, our cars are definitely twins. Rust in the same spots, just opposite sides. I only had to replace my quarter because it was so smashed.

    Excellent advice on the roof skin. I can see the same problem with the one I currently have that I have been fabbing on. I do not want to puddle weld, just because I forsee tons of cleanup.

    Makes me think for sure.

    Dan
    Logged
    One E body saved, 7 years and counting.

    Offline thedodgeboys

    • Resident
    • *****
    • Posts: 3633
    • ''Normal’s Overrated''
      • THE DODGE BOYS
    Re: Long term project
    « Reply #62 on: April 11, 2008 - 05:37:38 PM »
     :iagree: :iagree: :iagree:

    Thats some great work. :thumbsup:
    Logged
    Go Fast & Have Fun...
    70 6.1 HEMI 6-speed Drop Top...

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Re: Long term project
    « Reply #63 on: April 11, 2008 - 11:33:16 PM »
    I believe that the fabrication of new roof skins was definently a prayer answered. I darn near gave up and sold my car, because of the amount of patching my roof needed.  :bigsmile:
    Logged

    Offline DMZ73

    • Sr. Member
    • ****
    • Posts: 1482
      • http://www.pbase.com/dmz73/
    Re: Long term project
    « Reply #64 on: April 12, 2008 - 10:54:59 PM »
    It never ceases to amaze me how we can replace nearly every single panel without even flinching.

    This site shows how dedicated and inspiring people really are.

    Me, I like  agood "Challenge". At least your car did not look like it got hit with the ugly stick.
    Mine got hit with the whole tree.

    < http://www.pbase.com/dmz73/image/63591642 >

    I plan to be in paint in Sept/Oct.

    Dan
    Logged
    One E body saved, 7 years and counting.

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Re: Long term project
    « Reply #65 on: April 12, 2008 - 11:01:14 PM »
    I have see some of your pics, from your posts, and you definenlty have had a lot of experience in replacing sheet metal. :eek4: I have been watching about a half dozen other members also, and their resto's, and that is what has inspired and helped me in the work i have done so far on my car. Thankyou all. I too hope to be in paint by Sept., otherwise it will have to wait untill Dec.  :cheers:
    Logged

    Offline CHUCKS71

    • Sr. Member
    • ****
    • Posts: 1123
    • "IF YOUR NOT FIRST YOUR LAST"
    Re: Long term project
    « Reply #66 on: April 13, 2008 - 08:16:42 AM »
    Just keep going on it your making great progress!There is a lot of stuff that I have never done before so I just ask members for help or I guess and start cutting and welding and hope for the best!  :lol:  Chuck
    Logged
    :burnout::22yikes::burnout:    www.ronpaul2008.com
    71 Challenger 4spd   www.conservativepunk.com
    03 Ram diesel 6spd    http://s105.photobucket.com/albums/m222/chucknutz/1971%20Challenger/

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Re: Long term project
    « Reply #67 on: April 15, 2008 - 01:21:55 AM »
    Quote from: CHUCKS71 on April 13, 2008 - 08:16:42 AM
    Just keep going on it your making great progress!There is a lot of stuff that I have never done before so I just ask members for help or I guess and start cutting and welding and hope for the best!  :lol:  Chuck

    Yeah that is me to the "T". I never read instructions, i just dive right in hoping to figure it out as i go. I should get better at asking questions before i do something rather than after. that is why i have to redo my driver side floor pan. :pullinghair: I should have paid more attention to underneath. I have a gap of more than a 1/2 between floor pan and the frame, and i can't get it to pull down to it. So out comes the spot weld cutter and cross my fingers that i can fix it without having to buy another pan. :bricks1:
    Logged

    Offline CHUCKS71

    • Sr. Member
    • ****
    • Posts: 1123
    • "IF YOUR NOT FIRST YOUR LAST"
    Re: Long term project
    « Reply #68 on: April 15, 2008 - 06:53:11 PM »
    I ran a few screws into my floor to my frame to hold it down along with a ton of clamps it worked pretty good. Good luck.  :2thumbs:
    Logged
    :burnout::22yikes::burnout:    www.ronpaul2008.com
    71 Challenger 4spd   www.conservativepunk.com
    03 Ram diesel 6spd    http://s105.photobucket.com/albums/m222/chucknutz/1971%20Challenger/

    Offline 1970RTSE

    • Jr. Member
    • **
    • Posts: 184
    Re: Long term project
    « Reply #69 on: April 16, 2008 - 12:21:43 PM »
    Quote from: Challengercrazy on February 23, 2008 - 02:25:36 PM
    Here is my next project. 2 lower patch panels and a marker light cut out. I am converting my side marker lights over to the 70-71 style. Real simple with these cut outs. But before i can get started on those, i have a few honey do projects to clear up. Had to tile the kitchen and dining area this winter, and now i just have to finish up the trim around the base. :blah:

    Where did you get the patch for the front part of the quarter?  Any more progress yet?
    Logged

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Re: Long term project
    « Reply #70 on: April 17, 2008 - 09:15:29 AM »
    Quote from: 1970RTSE on April 16, 2008 - 12:21:43 PM
    Where did you get the patch for the front part of the quarter?  Any more progress yet?

    The front patch i got through Herbs parts. Terrible fit, i had a heck of a time getting it matched up.
    I will post pics when i get a moment.
    Logged

    Offline 1970RTSE

    • Jr. Member
    • **
    • Posts: 184
    Re: Long term project
    « Reply #71 on: April 17, 2008 - 05:57:11 PM »
    Quote from: Challengercrazy on April 17, 2008 - 09:15:29 AM
    The front patch i got through Herbs parts. Terrible fit, i had a heck of a time getting it matched up.
    I will post pics when i get a moment.

    Hmm, thanks for the infor on the bad fit.  I may just fit a patch to the small hole(s) I have.  I have to media blast the area to see how bad it is.  I need the area about an inch from the opening.
    Logged

    Offline CHUCKS71

    • Sr. Member
    • ****
    • Posts: 1123
    • "IF YOUR NOT FIRST YOUR LAST"
    Re: Long term project
    « Reply #72 on: April 17, 2008 - 06:55:47 PM »
    Quote from: Challengercrazy on April 17, 2008 - 09:15:29 AM
    The front patch i got through Herbs parts. Terrible fit, i had a heck of a time getting it matched up.
    I will post pics when i get a moment.
    This was the rocker I got from Herb's it wasn't even close.They were nice and returned the part without a problem.
    Logged
    :burnout::22yikes::burnout:    www.ronpaul2008.com
    71 Challenger 4spd   www.conservativepunk.com
    03 Ram diesel 6spd    http://s105.photobucket.com/albums/m222/chucknutz/1971%20Challenger/

    Offline Rare_T_A

    • Resident
    • *****
    • Posts: 3916
      • Freiss Family Mopar Site
    Re: Long term project
    « Reply #73 on: April 17, 2008 - 07:50:44 PM »
    We ran into the same problem with the rockers from YO. We ended up cutting it and making it work.
    Logged
    '09 Challenger R/T  5.7 HEMI Auto
    '70Challenger T/A 340 727

    Fargo, N. Dak.
    My web Site:  http://freiss.co.nr

    My Flikr Page: http://www.flickr.com/photos/102813164@N04/

    I was born with nothing and I still have most of it left!

    Offline Chlngrcrzy

    • Sr. Member
    • ****
    • Posts: 1410
    Re: Long term project
    « Reply #74 on: April 17, 2008 - 09:13:39 PM »
    Quote from: CHUCKS71 on April 17, 2008 - 06:55:47 PM
    This was the rocker I got from Herb's it wasn't even close.They were nice and returned the part without a problem.
    The people at Herbs were great to talk to and work with. I wish i had returned the patch panel to them, but i couldn't find another on to go with. If you don't have to replace a large area, i would use their panel and just cut out the peice you need.
    Logged
    Pages: 1 ... 3 4 [5] 6 7 ... 16
    « previous next »