Author Topic: My '72 B5 'cuda Project  (Read 85789 times)

Offline mrbill426

  • Full Member
  • ***
  • Posts: 775
    • All Around Mopars
Re: My '72 B5 'cuda Project
« Reply #210 on: April 09, 2015 - 05:33:19 PM »
Do you mean in the corners, eg 10:00 and 2:00 in the picture?

Bill


The channel where the dash meets the windshield should be painted black underneath the defroster vents  :2cents:


You can see what I mean in this picture:
MOPAR or NO car!

'72 'Cuda 340, white on white
'72 Sebring; bracket project
'64 Imperial Crown black on black
'66 Imperial Crown; parts car




Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #211 on: May 17, 2015 - 09:19:05 PM »
A little more progress. I'm all over the place with the re-assembly. For now the grill is set aside. I've put the deck lid and rear bumper in place. Both will still need adjustment once I have all the parts I need.



I've managed to separate the tail lights without mangling them too badly. I'll clean them up and re-assemble them with new foam gaskets.



And I've started re-assembling the dash. Just need to get some texture paint to re-finish the other dash bezels.





Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #212 on: May 21, 2015 - 08:56:37 PM »
And it's beginning to look like a 'cuda again. (notice that it says so on the tail panel?)

 :grinyes:

Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #213 on: May 24, 2015 - 07:13:10 PM »
Got the hood bolted in with the scoops and badges. Notice the badge re-affirms that this is indeed a 'cuda and not only a money pit.



Also got the pedals and dash partially assembled. I'm hoping and can have my dash complete with a new pad in July.

Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: My '72 B5 'cuda Project
« Reply #214 on: May 24, 2015 - 08:16:20 PM »
You're going to install the dash pad to the frame BEFORE installing in the car...correct ?
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #215 on: May 24, 2015 - 11:10:59 PM »
 ???
Is there another way?
Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #216 on: July 03, 2015 - 07:18:18 PM »
While waiting on my dash pad to arrive...  ::)
Brake booster and master cylinder before...



...and after.



Also installed the parking brake.

Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #217 on: July 04, 2015 - 04:52:50 PM »
While waiting on my dash pad to arrive...  ::)
I put my dash on a work stand.

Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline roadman5312

  • Sr. Resident
  • ******
  • Posts: 5688
Re: My '72 B5 'cuda Project
« Reply #218 on: July 04, 2015 - 05:08:33 PM »
    Looking great    :2thumbs:

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #219 on: July 06, 2015 - 10:41:16 PM »
While waiting on my dash pad to arrive...  ::)
Began cleaning up the dash harness and repaired a couple of bad connections.



Anyone know where's the best place to get this broken connection?

Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline anlauto

  • Permanent Resident
  • *******
  • Posts: 12328
  • I'm Alan G...I'm a Mopar Addict
    • Alan Gallant Automotive Restoration
Re: My '72 B5 'cuda Project
« Reply #220 on: July 06, 2015 - 10:44:07 PM »
 :-X
I've taught you everything you know.....but I haven't taught you everything I know !
www.alangallantautomotiverestoration.com

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #221 on: July 06, 2015 - 10:48:43 PM »
...what..?
Lips sealed?
It's a secret?
 :dunno:
Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline Pimtao

  • Jr. Member
  • **
  • Posts: 228
Re: My '72 B5 'cuda Project
« Reply #222 on: July 06, 2015 - 10:51:03 PM »
I would get a complete new harness. Will probably save you a lot of trouble in the future and is also saver!

Offline 'cudaCruiser

  • Jr. Member
  • **
  • Posts: 208
    • My '72 B5 'cuda
Re: My '72 B5 'cuda Project
« Reply #223 on: July 06, 2015 - 11:00:17 PM »
I really just can't make myself spend $600 on a new dash harness. There's not that much wrong with this one.
I spent the whole day just tracing out circuits and ohming them out to check for continuity. The wire is still pliable and no bare or broken spots. I don't feel uncomfortable with this one. Just need another connection.
Mickey



"The man who complains about the way the ball bounces is likely to be the one who dropped it." Lou Holtz

Offline JoeGrapes

  • Full Member
  • ***
  • Posts: 508
Re: My '72 B5 'cuda Project
« Reply #224 on: July 07, 2015 - 09:14:00 PM »
cudacruiser, I think I have one in a box of electrical stuff. PM me with your address and I'll send it to you.