Author Topic: Engine paint question ....the best???  (Read 3393 times)

Offline 70_challenger

  • Jr. Member
  • **
  • Posts: 453
  • Suburban Detroit, Michigan
Re: Engine paint question ....the best???
« Reply #15 on: September 21, 2007 - 12:44:40 AM »
Tom,

  I only went the POR-15 direction because April did. Yes, I didn't care to look original(as you might have noticed  :grinyes: ) Her Hemi-orange engine looks dead on to me.  :2thumbs:


  Mike

So that's not the original turquoise?   ;D
Understood, Mike, and yours does look awesome!  And I appreciate the feedback on the POR-15. 

I know this topic went on for a while over at moparts, as several people weighed in about matching the looks of both the turquoise and Street Hemi Orange.  I welcome any experience and comments from folks here about application and color matching.

Thanks again,
-Tom




Offline Topcat

  • C-C.com Expert
  • ********
  • Posts: 15376
  • Member since 9/16/04
Re: Engine paint question ....the best???
« Reply #16 on: September 21, 2007 - 01:14:02 AM »
Use Metal clean or similar type cleaner to clean block prior to primering or paint.

I was told that spray the block after it is clean shiney and bare cast with etching primer. 

This sounds like it would make sense since etch primer grabs well onto bare metal.
Mike, Fremont, CA.


Offline 72fish

  • 1972 Plymouth 'Cuda
  • Jr. Member
  • **
  • Posts: 81
    • Blue Cuda Studios
Re: Engine paint question ....the best???
« Reply #17 on: September 25, 2007 - 10:24:38 AM »
Hey Guys,

Thanks for all the input.  This definitely is not an easy decision.  I'll let you know how it turns out.  BTW, I've posted some pics of my 72 resto project and my borther's (72cudaguy) on our website: www.twocudas.com.  Both are coming along nicely.  Target date for completion on both cars is 4/1/08.

Thanks again!

72fish
Rotisserie Resto - Numbers Matching 'I' Code 340 'Cuda - 4 Spd. -B5 'True Blue'

Blue Cuda Studios, Hi-Res Custom and *Affordable* Show Boards, Prints & Designs
http://www.BlueCudaStudios.com

Offline hooD

  • detroit iron
  • Resident
  • *****
  • Posts: 2820
  • Motor City Made Muscle
Re: Engine paint question ....the best???
« Reply #18 on: September 26, 2007 - 01:58:09 AM »
72fish------>  I went to your website, but there is nothing to click on (links) to see your cuda projects.  :crying: :crying: :crying: :crying: :crying:
-Larry
member since AUG 2007
http://www.youtube.com/watch?v=NvrWiLgDm7Y

southeastern michigan usa
             
 
            
1973 'CUDA 340
 
original owner
37,117 miles
  
:grinyes: *click my E-Body* :grinyes:

Offline bb71challenger

  • Sr. Resident
  • ******
  • Posts: 6549
Re: Engine paint question ....the best???
« Reply #19 on: September 26, 2007 - 02:17:17 AM »
I think the por-15 is a close enough approximation of street hemi orange and unless I powder coat the block that is probably what I will do
1971 Challenger (OO==== ====OO) getting close!
1970 Challenger (OO########OO) long ways off
*Brett*

Offline 70_challenger

  • Jr. Member
  • **
  • Posts: 453
  • Suburban Detroit, Michigan
Re: Engine paint question ....the best???
« Reply #20 on: September 26, 2007 - 11:51:42 AM »
72fish: That is a nice website.  I hope you've gotten the advice you need from this thread, and that I didn't take it off-topic.

For those of you who have used the POR-15 engine paint...How well does it go on, when brush-painting?
I have used the regular POR-15 and their top coats on my suspension parts, and I hate it.  The POR-15 is like painting with milk, and their top coats are like painting with glue.  The end result is a brush-stroked globby mess with a lot of paint runs, even when following their directions to the letter.
Does the POR-15 engine paint spread similar to the other POR top-coats?

Finally, has anyone tried painting with the POR-15 kit, and then applying a flat clear over it?  Most of the POR products just look very shiny.

Thanks again,
-Tom

Offline 71bigblock

  • Sr. Resident
  • ******
  • Posts: 5337
    • Steve's Mopars
Re: Engine paint question ....the best???
« Reply #21 on: September 26, 2007 - 01:25:27 PM »
I brushed it on, and unless the engine is out of the car, I dont think anyone would be able to tell.  It levels really nicely.  Sure in some places it is a little more obvious, but at least you dont have to get a gun, tape everything, etc.  It is kind of thick, but that eliminates any runs while brushing.  I really liked it.   :2thumbs:

Offline 72fish

  • 1972 Plymouth 'Cuda
  • Jr. Member
  • **
  • Posts: 81
    • Blue Cuda Studios
Re: Engine paint question ....the best???
« Reply #22 on: September 28, 2007 - 12:19:30 PM »

Hey HooD,

Sorry about the 'link difficulties' -not sure what was goin on there  :clueless:   I just went out there and everything seems to be working ok today.  I'll be posting more pics tonight.  Things are really coming along.  Both motors (blocks and heads) are finished being machined and are ready for reassembly -I should have pics in the next couple of weeks.

-72fish and 72cudaguy

www.twocudas.com
Rotisserie Resto - Numbers Matching 'I' Code 340 'Cuda - 4 Spd. -B5 'True Blue'

Blue Cuda Studios, Hi-Res Custom and *Affordable* Show Boards, Prints & Designs
http://www.BlueCudaStudios.com

Offline 72fish

  • 1972 Plymouth 'Cuda
  • Jr. Member
  • **
  • Posts: 81
    • Blue Cuda Studios
Re: Engine paint question ....the best???
« Reply #23 on: September 28, 2007 - 12:21:29 PM »

..........forgot to mention to click on the links at the top of the Welcome Page'.  For the most recent pics, click on the 'Summer 07' link.

Thanks!
Rotisserie Resto - Numbers Matching 'I' Code 340 'Cuda - 4 Spd. -B5 'True Blue'

Blue Cuda Studios, Hi-Res Custom and *Affordable* Show Boards, Prints & Designs
http://www.BlueCudaStudios.com

Offline hooD

  • detroit iron
  • Resident
  • *****
  • Posts: 2820
  • Motor City Made Muscle
Re: Engine paint question ....the best???
« Reply #24 on: September 30, 2007 - 09:20:11 PM »
Hey HooD,

Sorry about the 'link difficulties' -not sure what was goin on there  :clueless:   I just went out there and everything seems to be working ok today.  I'll be posting more pics tonight.  Things are really coming along.  Both motors (blocks and heads) are finished being machined and are ready for reassembly -I should have pics in the next couple of weeks.

-72fish and 72cudaguy

www.twocudas.com
I used a different web browser and your links worked 100%.  Keep the pictures coming.  If i can help you with any photos of my car for references, let me know, i'd be happy to help.
 
-Larry
member since AUG 2007
http://www.youtube.com/watch?v=NvrWiLgDm7Y

southeastern michigan usa
             
 
            
1973 'CUDA 340
 
original owner
37,117 miles
  
:grinyes: *click my E-Body* :grinyes: