Author Topic: Clear or tinted?  (Read 2094 times)

Offline matt63

  • Sr. Member
  • ****
  • Posts: 1855
Clear or tinted?
« on: September 20, 2007 - 12:36:28 PM »
I ordered new rear and side glass and I have to tell them whether I want clear or tinted by tomorrow.  What looks better? The existing glass doesn't seem to have an obvious tint to it.
Matt in Edmonton

'68 Valiant
'73 Cuda 340 4 speed (408) SOLD




Offline Confederate Cuda

  • Full Member
  • ***
  • Posts: 727
Re: Clear or tinted?
« Reply #1 on: September 20, 2007 - 01:13:19 PM »
Matt,
Where did you order the glass from? Most of the people that sell glass for our cars have the orginal "green" glass tint as opposed to modern tint. If your car is an AC car the tint will make a difference on heat control.

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: Clear or tinted?
« Reply #2 on: September 20, 2007 - 01:17:20 PM »
I just ordered a full set from PSAUTO... I ordered the green tint. I was on the fence for a while too. I remember seeing both types up close and the tinted looked nicer... plus I am putting A/C in the car.

This would be a good topic for some pics!!

 :useless:

Offline matt63

  • Sr. Member
  • ****
  • Posts: 1855
Re: Clear or tinted?
« Reply #3 on: September 20, 2007 - 02:00:13 PM »
I just ordered a full set from PSAUTO... I ordered the green tint. I was on the fence for a while too. I remember seeing both types up close and the tinted looked nicer... plus I am putting A/C in the car.

This would be a good topic for some pics!!

 :useless:
I don't need AC up here (unfortunately).  Most of the time the side windows are down.  So the PS glass had a nice light tint?  How did it fit? Thanks.
Matt in Edmonton

'68 Valiant
'73 Cuda 340 4 speed (408) SOLD

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: Clear or tinted?
« Reply #4 on: September 20, 2007 - 03:06:18 PM »
havent gotten it yet... Other Mopar owner have had good luck with them. Hopefully I will too.

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Clear or tinted?
« Reply #5 on: September 20, 2007 - 04:30:28 PM »


I'd be interested to see how one of these cars look with 35% all round black tint. I like the looks on any other car but had a feeling that on these cars it would like to "modified" and stand out like a sore thumb and I like my cars to hide what they have that's new. Still keen to see if someone does it......
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline matt63

  • Sr. Member
  • ****
  • Posts: 1855
Re: Clear or tinted?
« Reply #6 on: September 20, 2007 - 07:41:17 PM »
I'm not a fan of the dark tints either.
Matt in Edmonton

'68 Valiant
'73 Cuda 340 4 speed (408) SOLD

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: Clear or tinted?
« Reply #7 on: September 20, 2007 - 10:14:08 PM »
FYI..I found another place called Auto City Classics (www.autocityclassic.com) that does Challenger glass and they actually have a dark smoked tint in addition to the clear and green tint. I thought about it for a minute but then thought it would look awkward.


Offline JS23U0B

  • Jr. Member
  • **
  • Posts: 247
Re: Clear or tinted?
« Reply #8 on: September 21, 2007 - 12:05:17 AM »

I'd be interested to see how one of these cars look with 35% all round black tint. I like the looks on any other car but had a feeling that on these cars it would like to "modified" and stand out like a sore thumb and I like my cars to hide what they have that's new. Still keen to see if someone does it......


Back in the day, a old friend of mine had a 73 Cuda with semi dark tent. I did not care for it at all. I dont know what it was, it just did not look right IMO. I cant find any pics, i think they died with my old computer :dunno: I seen it before and after, and i think it made the car look worse. I love the stock look, just not stock handling, and braking.

Hey Carl, have you ever seen 18in rims, that look like factory steel rims/hudcabs?

Offline Carlwalski

  • C-C.com Expert
  • ********
  • Posts: 20672
Re: Clear or tinted?
« Reply #9 on: September 21, 2007 - 04:44:01 AM »

Hey Carl, have you ever seen 18in rims, that look like factory steel rims/hudcabs?


Yup, I think I know the ones, there OK as for as modern go but just look like over proportioned rallye rims. If factory rallye rims didn't exists the wheel would probably look OK, but, all it reminds me of is a weird factory wheel.


Not to go off topic for the original poster but are these the rims you're referring too?
1970 Dodge Challenger R/T
White, License Plate, 0A-5599
540ci Aluminium Hemi, F.A.S.T EFI
TF-727 Gear Vendor OD, Dana 60

Offline JS23U0B

  • Jr. Member
  • **
  • Posts: 247
Re: Clear or tinted?
« Reply #10 on: September 21, 2007 - 07:48:45 AM »
Yup, I think I know the ones, there OK as for as modern go but just look like over proportioned rallye rims. If factory rallye rims didn't exists the wheel would probably look OK, but, all it reminds me of is a weird factory wheel.


Not to go off topic for the original poster but are these the rims you're referring too?

No those are ugly as hell. They look like this, but 18's  Or like cop car wheels?

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: Clear or tinted?
« Reply #11 on: September 21, 2007 - 12:25:30 PM »

Offline matt63

  • Sr. Member
  • ****
  • Posts: 1855
Re: Clear or tinted?
« Reply #12 on: September 21, 2007 - 01:30:56 PM »
Ended up ordering clear glass.  I think new glass all around will make a big difference in how the car looks. :smokin:

I found some info on the Moparts site which helped confirm the lack of tinting. Apparently the M8.7 code means clear. http://board.moparts.org/ubbthreads/showflat.php?Number=2984019
Matt in Edmonton

'68 Valiant
'73 Cuda 340 4 speed (408) SOLD

Offline EvilTwinATX

  • Full Member
  • ***
  • Posts: 866
Re: Clear or tinted?
« Reply #13 on: September 21, 2007 - 03:20:30 PM »
where did you end up ordering from?

Offline matt63

  • Sr. Member
  • ****
  • Posts: 1855
Re: Clear or tinted?
« Reply #14 on: September 21, 2007 - 03:56:08 PM »
PS Auto Glass $700 for all side and rear glass, shipped.
Matt in Edmonton

'68 Valiant
'73 Cuda 340 4 speed (408) SOLD