Grenaded my transmission

[KellysCuda aircard]

Make sure you have a low band apply. (all transbrakes should so if you go that route you should be fine) I bet ya a nickel it hurt the sprag in the burn out,do you use low gear for the burn out?

I currently dont have a trans brake, but I do start my burn outs in first, but I jump to second and drive as soon as I can. I dont rev up and down in the burn out box and always try to spin through the box so as not to hurt the trans...not sure why I killed this one.

[tactransman]

Make sure what ever you get it has low band apply. If you are reverse pattern now I HIGHLY recommend C.R.T. manual reverse V.B.'s His brakes are A&A brand.
https://host342.ipowerweb.com/~coperaci/osCommerce/catalog/index.php?cPath=23&osCsid=2fbd8ec0bebfc0d5dfe7c4c7d0054ec3

[KellysCuda aircard]

Make sure what ever you get it has low band apply. If you are reverse pattern now I HIGHLY recommend C.R.T. manual reverse V.B.'s His brakes are A&A brand.
https://host342.ipowerweb.com/~coperaci/osCommerce/catalog/index.php?cPath=23&osCsid=2fbd8ec0bebfc0d5dfe7c4c7d0054ec3

Thanks, I have that site book marked now and I will be asking my trans guy some of these questions.

[moparniac]

I though no low band apply was good my cheetah dont have low gear band apply??? takes like a neutral affect when going fron 2nd to 1st..

[tactransman]

Low band apply is ALWAYS good.Sprag protection.